[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251015040847.6421-1-sensor1010@163.com>
Date: Tue, 14 Oct 2025 21:08:47 -0700
From: Lizhe <sensor1010@....com>
To: andrew+netdev@...n.ch,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
mcoquelin.stm32@...il.com,
alexandre.torgue@...s.st.com,
rmk+kernel@...linux.org.uk,
jonas@...boo.se,
chaoyi.chen@...k-chips.com,
david.wu@...k-chips.com
Cc: netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Lizhe <sensor1010@....com>
Subject: [PATCH net-next] net: dwmac-rk: No need to check the return value of the phy_power_on()
'phy_power_on' is a local scope one within the driver, since the return
value of the phy_power_on() function is always 0, checking its return
value is redundant.
the function name 'phy_power_on()' conflicts with the existing
phy_power_on() function in the PHY subsystem. a suitable alternative
name would be rk_phy_power_set(), particularly since when the second
argument is false, this function actually powers off the PHY
Signed-off-by: Lizhe <sensor1010@....com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 51ea0caf16c1..9d296bfab013 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1461,23 +1461,18 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
return 0;
}
-static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
+static void rk_phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
{
struct regulator *ldo = bsp_priv->regulator;
struct device *dev = bsp_priv->dev;
- int ret;
if (enable) {
- ret = regulator_enable(ldo);
- if (ret)
+ if (regulator_enable(ldo))
dev_err(dev, "fail to enable phy-supply\n");
} else {
- ret = regulator_disable(ldo);
- if (ret)
+ if (regulator_disable(ldo))
dev_err(dev, "fail to disable phy-supply\n");
}
-
- return 0;
}
static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
@@ -1655,11 +1650,7 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
dev_err(dev, "NO interface defined!\n");
}
- ret = phy_power_on(bsp_priv, true);
- if (ret) {
- gmac_clk_enable(bsp_priv, false);
- return ret;
- }
+ rk_phy_power_on(bsp_priv, true);
pm_runtime_get_sync(dev);
--
2.17.1
Powered by blists - more mailing lists