| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <515ab883.24a.199ebc26ad7.Coremail.lizhi2@eswincomputing.com>
Date: Thu, 16 Oct 2025 14:43:31 +0800 (GMT+08:00)
From: 李志 <lizhi2@...incomputing.com>
To: "Bo Gan" <ganboing@...il.com>
Cc: weishangjuan@...incomputing.com, devicetree@...r.kernel.org,
andrew+netdev@...n.ch, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, mcoquelin.stm32@...il.com,
alexandre.torgue@...s.st.com, rmk+kernel@...linux.org.uk,
yong.liang.choong@...ux.intel.com, vladimir.oltean@....com,
prabhakar.mahadev-lad.rj@...renesas.com, jan.petrous@....nxp.com,
inochiama@...il.com, jszhang@...nel.org, 0x1207@...il.com,
boon.khai.ng@...era.com, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, ningyu@...incomputing.com,
linmin@...incomputing.com, pinkesh.vaghela@...fochips.com,
"Krzysztof Kozlowski" <krzysztof.kozlowski@...aro.org>,
"Xuyang Dong" <dongxuyang@...incomputing.com>
Subject: Re: Re: [PATCH v8 1/2] dt-bindings: ethernet: eswin: Document for
EIC7700 SoC
Hi Bo Gan,
Please refer to the original email. Based on the v6 clock patchset
and v7 reset patchset you mentioned, we have provided an example
using macros.
Best regards,
Li Zhi
> -----原始邮件-----
> 发件人: "Bo Gan" <ganboing@...il.com>
> 发送时间:2025-10-16 11:17:25 (星期四)
> 收件人: weishangjuan@...incomputing.com, devicetree@...r.kernel.org, andrew+netdev@...n.ch, davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com, mcoquelin.stm32@...il.com, alexandre.torgue@...s.st.com, rmk+kernel@...linux.org.uk, yong.liang.choong@...ux.intel.com, vladimir.oltean@....com, prabhakar.mahadev-lad.rj@...renesas.com, jan.petrous@....nxp.com, inochiama@...il.com, jszhang@...nel.org, 0x1207@...il.com, boon.khai.ng@...era.com, linux-kernel@...r.kernel.org, netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com, linux-arm-kernel@...ts.infradead.org
> 抄送: ningyu@...incomputing.com, linmin@...incomputing.com, lizhi2@...incomputing.com, pinkesh.vaghela@...fochips.com, "Krzysztof Kozlowski" <krzysztof.kozlowski@...aro.org>, "Xuyang Dong" <dongxuyang@...incomputing.com>
> 主题: Re: [PATCH v8 1/2] dt-bindings: ethernet: eswin: Document for EIC7700 SoC
>
> Hi Zhi, ShangJuan,
>
>
> On 10/15/25 04:40, weishangjuan@...incomputing.com wrote:
> > From: Shangjuan Wei <weishangjuan@...incomputing.com>
> >
> > Add ESWIN EIC7700 Ethernet controller, supporting clock
> > configuration, delay adjustment and speed adaptive functions.
> >
> > Signed-off-by: Zhi Li <lizhi2@...incomputing.com>
> > Signed-off-by: Shangjuan Wei <weishangjuan@...incomputing.com>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> > ---
> > .../bindings/net/eswin,eic7700-eth.yaml | 127 ++++++++++++++++++
> > 1 file changed, 127 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
> > new file mode 100644
> > index 000000000000..9ddbfe219ae2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
> > @@ -0,0 +1,127 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/eswin,eic7700-eth.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Eswin EIC7700 SOC Eth Controller
> > +
> > +maintainers:
> > + - Shuang Liang <liangshuang@...incomputing.com>
> > + - Zhi Li <lizhi2@...incomputing.com>
> > + - Shangjuan Wei <weishangjuan@...incomputing.com>
> > +
> > +description:
> > + Platform glue layer implementation for STMMAC Ethernet driver.
> > +
> > +select:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - eswin,eic7700-qos-eth
> > + required:
> > + - compatible
> > +
> > +allOf:
> > + - $ref: snps,dwmac.yaml#
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - const: eswin,eic7700-qos-eth
> > + - const: snps,dwmac-5.20
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-names:
> > + const: macirq
> > +
> > + clocks:
> > + items:
> > + - description: AXI clock
> > + - description: Configuration clock
> > + - description: GMAC main clock
> > + - description: Tx clock
> > +
> > + clock-names:
> > + items:
> > + - const: axi
> > + - const: cfg
> > + - const: stmmaceth
> > + - const: tx
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + reset-names:
> > + items:
> > + - const: stmmaceth
> > +
> > + rx-internal-delay-ps:
> > + enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
> > +
> > + tx-internal-delay-ps:
> > + enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
> > +
> > + eswin,hsp-sp-csr:
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > + items:
> > + - description: Phandle to HSP(High-Speed Peripheral) device
> > + - description: Offset of phy control register for internal
> > + or external clock selection
> > + - description: Offset of AXI clock controller Low-Power request
> > + register
> > + - description: Offset of register controlling TX/RX clock delay
> > + description: |
> > + High-Speed Peripheral device needed to configure clock selection,
> > + clock low-power mode and clock delay.
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - interrupts
> > + - interrupt-names
> > + - phy-mode
> > + - resets
> > + - reset-names
> > + - rx-internal-delay-ps
> > + - tx-internal-delay-ps
> > + - eswin,hsp-sp-csr
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + ethernet@...00000 {
> > + compatible = "eswin,eic7700-qos-eth", "snps,dwmac-5.20";
> > + reg = <0x50400000 0x10000>;
> > + clocks = <&d0_clock 186>, <&d0_clock 171>, <&d0_clock 40>,
> > + <&d0_clock 193>;
>
> Can you let me know which clock I should use for EIC7700 (HiFive P550), if
> I apply this patchset on top of XuYang's v6 clock patchset? ref:
> https://lore.kernel.org/all/20251009092029.140-1-dongxuyang@eswincomputing.com/
> In your vendor kernel, you have EIC7700_CLK_HSP_ETH_[APP|CSR]_CLK, but in
> the v6 clock patchset, I couldn't find them. Please help translate
> <186> <171> <40> <193> to the macro of v6 clock patchset, so I can help
> test it.
>
> > + clock-names = "axi", "cfg", "stmmaceth", "tx";> + interrupt-parent = <&plic>;
> > + interrupts = <61>;
> > + interrupt-names = "macirq";
> > + phy-mode = "rgmii-id";
> > + phy-handle = <&phy0>;> + resets = <&reset 95>;
>
> For reset, I assume this <95> corresponds to EIC7700_RESET_HSP_ETH0_ARST,
> if applying on top of the v7 reset patchset, correct? ref:
> https://lore.kernel.org/all/20250930093132.2003-1-dongxuyang@eswincomputing.com/
>
> > + reset-names = "stmmaceth";
> > + rx-internal-delay-ps = <200>;
> > + tx-internal-delay-ps = <200>;
> > + eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>;
> > + snps,axi-config = <&stmmac_axi_setup>;
> > + snps,aal;
> > + snps,fixed-burst;
> > + snps,tso;
> > + stmmac_axi_setup: stmmac-axi-config {
> > + snps,blen = <0 0 0 0 16 8 4>;
> > + snps,rd_osr_lmt = <2>;
> > + snps,wr_osr_lmt = <2>;
> > + };
> > + };
ethernet@...00000 {
compatible = "eswin,eic7700-qos-eth", "snps,dwmac-5.20";
reg = <0x50400000 0x10000>;
clocks = <&d0_clock EIC7700_CLK_GATE_HSP_ACLK>,
<&d0_clock EIC7700_CLK_GATE_HSP_CFG_CLK>,
<&d0_clock EIC7700_CLK_MUX_SYSCFG_CLK_ROOT_2MUX1_GFREE>,
<&d0_clock EIC7700_CLK_GATE_HSP_ETH0_CORE_CLK>;
clock-names = "axi", "cfg", "stmmaceth", "tx";
interrupt-parent = <&plic>;
interrupts = <61>;
interrupt-names = "macirq";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
resets = <&reset EIC7700_RESET_HSP_ETH0_ARST>;
reset-names = "stmmaceth";
rx-internal-delay-ps = <200>;
tx-internal-delay-ps = <200>;
eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>;
snps,axi-config = <&stmmac_axi_setup>;
snps,aal;
snps,fixed-burst;
snps,tso;
stmmac_axi_setup: stmmac-axi-config {
snps,blen = <0 0 0 0 16 8 4>;
snps,rd_osr_lmt = <2>;
snps,wr_osr_lmt = <2>;
};
};
> > --
> > 2.17.1
> >
>
> Bo
Powered by blists - more mailing lists