[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5f430ff9-d701-426a-bf93-5290e6912eb4@collabora.com>
Date: Thu, 16 Oct 2025 16:29:14 +0200
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Daniel Golle <daniel@...rotopia.org>, Sjoerd Simons <sjoerd@...labora.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Brugger
<matthias.bgg@...il.com>, Ryder Lee <ryder.lee@...iatek.com>,
Jianjun Wang <jianjun.wang@...iatek.com>, Bjorn Helgaas
<bhelgaas@...gle.com>, Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kwilczynski@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Chunfeng Yun <chunfeng.yun@...iatek.com>, Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>, Lee Jones <lee@...nel.org>,
Andrew Lunn <andrew+netdev@...n.ch>, "David S. Miller"
<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Lorenzo Bianconi <lorenzo@...nel.org>, Felix Fietkau <nbd@....name>,
kernel@...labora.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org, netdev@...r.kernel.org,
Bryan Hinton <bryan@...anhinton.com>
Subject: Re: [PATCH 02/15] arm64: dts: mediatek: mt7981b-openwrt-one:
Configure UART0 pinmux
Il 16/10/25 14:38, Daniel Golle ha scritto:
> On Thu, Oct 16, 2025 at 12:08:38PM +0200, Sjoerd Simons wrote:
>> Add explicit pinctrl configuration for UART0 on the OpenWrt One board,
>>
>> Signed-off-by: Sjoerd Simons <sjoerd@...labora.com>
>> ---
>> arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
>> index 968b91f55bb27..f836059d7f475 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
>> +++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
>> @@ -22,6 +22,17 @@ memory@...00000 {
>> };
>> };
>>
>> +&pio {
>> + uart0_pins: uart0-pins {
>> + mux {
>> + function = "uart";
>> + groups = "uart0";
>> + };
>> + };
>> +};
>> +
>> &uart0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_pins>;
>> status = "okay";
>> };
>
> As there is only a single possible pinctrl configuration for uart0,
> both the pinmux definition as well as the pinctrl properties should go
> into mt7981b.dtsi rather than in the board's dts.
If there's really one single possible pin configuration for the UART0 pins,
as in, those pins *do not* have a GPIO mode, then yes I agree.
If those pins can be as well configured as GPIOs, this goes to board DTS.
Cheers,
Angelo
Powered by blists - more mailing lists