| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251019-qcom-sdm660-cdsp-adsp-dts-v1-1-9ab5f2865a6e@mainlining.org>
Date: Sun, 19 Oct 2025 19:27:06 +0300
From: Nickolay Goppen <setotau@...nlining.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
linux@...nlining.org, Nickolay Goppen <setotau@...nlining.org>
Subject: [PATCH 1/2] arm64: dts: qcom: sdm630/660: Add CDSP-related nodes
In order to enable CDSP support for SDM660 SoC:
* add shared memory p2p nodes for CDSP
* add CDSP-specific smmu node
* add CDSP peripheral image loader node
Memory region for CDSP in SDM660 occupies the same spot as
TZ buffer mem defined in sdm630.dtsi (which does not have CDSP).
In sdm660.dtsi replace buffer_mem inherited from SDM630 with
cdsp_region, which is also larger in size.
SDM636 also doesn't have CDSP, so remove inherited from sdm660.dtsi
related nodes and add buffer_mem back.
Signed-off-by: Nickolay Goppen <setotau@...nlining.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm636.dtsi | 14 ++++
arch/arm64/boot/dts/qcom/sdm660.dtsi | 152 +++++++++++++++++++++++++++++++++++
3 files changed, 167 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 8b1a45a4e56e..a6a1933229b9 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -563,7 +563,7 @@ modem_smp2p_in: slave-kernel {
};
};
- soc@0 {
+ soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
diff --git a/arch/arm64/boot/dts/qcom/sdm636.dtsi b/arch/arm64/boot/dts/qcom/sdm636.dtsi
index ae15d81fa3f9..41e4e97f7747 100644
--- a/arch/arm64/boot/dts/qcom/sdm636.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm636.dtsi
@@ -16,6 +16,20 @@
* be addressed when the aforementioned
* peripherals will be enabled upstream.
*/
+/delete-node/ &cdsp_pil;
+/delete-node/ &cdsp_smmu;
+/delete-node/ &cdsp_region;
+
+/ {
+ /delete-node/ smp2p-cdsp;
+
+ reserved-memory {
+ buffer_mem: tzbuffer@...00000 {
+ reg = <0x00 0x94a00000 0x00 0x100000>;
+ no-map;
+ };
+ };
+};
&adreno_gpu {
compatible = "qcom,adreno-509.0", "qcom,adreno";
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index ef4a563c0feb..5c3bcf5f2573 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -9,6 +9,37 @@
#include "sdm630.dtsi"
+/delete-node/ &buffer_mem;
+
+/ {
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts = <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 30>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ reserved-memory {
+ cdsp_region: cdsp@...00000 {
+ reg = <0x00 0x94a00000 0x00 0x600000>;
+ no-map;
+ };
+ };
+};
+
&adreno_gpu {
compatible = "qcom,adreno-512.0", "qcom,adreno";
operating-points-v2 = <&gpu_sdm660_opp_table>;
@@ -247,6 +278,127 @@ &mmcc {
<0>;
};
+&soc {
+ cdsp_smmu: iommu@...0000 {
+ compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+ reg = <0x5180000 0x40000>;
+ #iommu-cells = <1>;
+
+ clocks = <&gcc GCC_HLOS1_VOTE_TURING_ADSP_SMMU_CLK>;
+ clock-names = "bus";
+
+ power-domains = <&gcc HLOS1_VOTE_TURING_ADSP_GDSC>;
+
+ #global-interrupts = <2>;
+ interrupts =
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cdsp_pil: remoteproc@...00000 {
+ compatible = "qcom,sdm660-cdsp-pas";
+ reg = <0x1a300000 0x00100>;
+ interrupts-extended =
+ <&intc GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_region>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+ power-domain-names = "cx";
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts = <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>;
+
+ label = "turing";
+ mboxes = <&apcs_glb 29>;
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&cdsp_smmu 3>;
+ };
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&cdsp_smmu 4>;
+ };
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&cdsp_smmu 5>;
+ };
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&cdsp_smmu 6>;
+ };
+ compute-cb@9 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <9>;
+ iommus = <&cdsp_smmu 7>;
+ };
+ compute-cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <10>;
+ iommus = <&cdsp_smmu 8>;
+ };
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&cdsp_smmu 9>;
+ };
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&cdsp_smmu 10>;
+ };
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&cdsp_smmu 11>;
+ };
+ };
+ };
+ };
+};
+
&tlmm {
compatible = "qcom,sdm660-pinctrl";
};
--
2.51.1
Powered by blists - more mailing lists