| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251020171059.2786070-8-wens@kernel.org>
Date: Tue, 21 Oct 2025 01:10:53 +0800
From: Chen-Yu Tsai <wens@...nel.org>
To: Chen-Yu Tsai <wens@...nel.org>,
Jernej Skrabec <jernej@...nel.org>,
Samuel Holland <samuel@...lland.org>,
Mark Brown <broonie@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Vinod Koul <vkoul@...nel.org>
Cc: Chen-Yu Tsai <wens@...e.org>,
linux-sunxi@...ts.linux.dev,
linux-sound@...r.kernel.org,
linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
dmaengine@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/11] arm64: dts: allwinner: a523: Add DMA controller device nodes
From: Chen-Yu Tsai <wens@...e.org>
The A523 has two DMA controllers. Add device nodes for both. Also hook
up DMA for existing devices.
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
.../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index a9e051a8bea3..8edbd3873199 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -241,6 +241,8 @@ uart0: serial@...0000 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
+ dmas = <&dma 14>, <&dma 14>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -252,6 +254,8 @@ uart1: serial@...0400 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -263,6 +267,8 @@ uart2: serial@...0800 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
+ dmas = <&dma 16>, <&dma 16>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -274,6 +280,8 @@ uart3: serial@...0c00 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
+ dmas = <&dma 17>, <&dma 17>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -285,6 +293,8 @@ uart4: serial@...1000 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART4>;
resets = <&ccu RST_BUS_UART4>;
+ dmas = <&dma 18>, <&dma 18>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -296,6 +306,8 @@ uart5: serial@...1400 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART5>;
resets = <&ccu RST_BUS_UART5>;
+ dmas = <&dma 19>, <&dma 19>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -307,6 +319,8 @@ uart6: serial@...1800 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART6>;
resets = <&ccu RST_BUS_UART6>;
+ dmas = <&dma 20>, <&dma 20>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -318,6 +332,8 @@ uart7: serial@...1c00 {
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART7>;
resets = <&ccu RST_BUS_UART7>;
+ dmas = <&dma 21>, <&dma 21>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -329,6 +345,8 @@ i2c0: i2c@...2000 {
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
+ dmas = <&dma 43>, <&dma 43>;
+ dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -342,6 +360,8 @@ i2c1: i2c@...2400 {
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ dmas = <&dma 44>, <&dma 44>;
+ dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -355,6 +375,8 @@ i2c2: i2c@...2800 {
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
+ dmas = <&dma 45>, <&dma 45>;
+ dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -368,6 +390,8 @@ i2c3: i2c@...2c00 {
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
+ dmas = <&dma 46>, <&dma 46>;
+ dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -381,6 +405,8 @@ i2c4: i2c@...3000 {
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
resets = <&ccu RST_BUS_I2C4>;
+ dmas = <&dma 47>, <&dma 47>;
+ dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -394,6 +420,8 @@ i2c5: i2c@...3400 {
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C5>;
resets = <&ccu RST_BUS_I2C5>;
+ dmas = <&dma 48>, <&dma 48>;
+ dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -408,6 +436,19 @@ syscon: syscon@...0000 {
ranges;
};
+ dma: dma-controller@...2000 {
+ compatible = "allwinner,sun55i-a523-dma",
+ "allwinner,sun50i-a100-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <54>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
sid: efuse@...6000 {
compatible = "allwinner,sun55i-a523-sid",
"allwinner,sun50i-a64-sid";
@@ -729,6 +770,8 @@ r_i2c0: i2c@...1400 {
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_BUS_R_I2C0>;
+ dmas = <&dma 49>, <&dma 49>;
+ dma-names = "rx", "tx";
resets = <&r_ccu RST_BUS_R_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c_pins>;
@@ -775,6 +818,19 @@ mcu_ccu: clock-controller@...2000 {
#reset-cells = <1>;
};
+ mcu_dma: dma-controller@...1000 {
+ compatible = "allwinner,sun55i-a523-mcu-dma",
+ "allwinner,sun50i-a100-dma";
+ reg = <0x07121000 0x1000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mcu_ccu CLK_BUS_MCU_DMA>, <&mcu_ccu CLK_MCU_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <15>;
+ resets = <&mcu_ccu RST_BUS_MCU_DMA>;
+ #dma-cells = <1>;
+ };
+
npu: npu@...2000 {
compatible = "vivante,gc";
reg = <0x07122000 0x1000>;
--
2.47.3
Powered by blists - more mailing lists