[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8591609.T7Z3S40VBb@jernej-laptop>
Date: Mon, 20 Oct 2025 19:52:20 +0200
From: Jernej Škrabec <jernej.skrabec@...il.com>
To: Chen-Yu Tsai <wens@...nel.org>, Jernej Skrabec <jernej@...nel.org>,
Samuel Holland <samuel@...lland.org>, Mark Brown <broonie@...nel.org>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Vinod Koul <vkoul@...nel.org>, Chen-Yu Tsai <wens@...nel.org>
Cc: linux-sunxi@...ts.linux.dev, linux-sound@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, dmaengine@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject:
Re: [PATCH 06/11] clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum
rate
Dne ponedeljek, 20. oktober 2025 ob 19:10:52 Srednjeevropski poletni čas je Chen-Yu Tsai napisal(a):
> While the user manual states that the PLL's rate should be between 180
> MHz and 3 GHz in the register defninition section, it also says the
> actual operating frequency is 22.5792*4 MHz in the PLL features table.
>
> 22.5792*4 MHz is one of the actual clock rates that we want and is
> is available in the SDM table. Lower the minimum clock rate to 90 MHz
> so that both rates in the SDM table can be used.
So factor of 2 could be missed somewhere?
>
> Fixes: 7cae1e2b5544 ("clk: sunxi-ng: Add support for the A523/T527 CCU PLLs")
> Signed-off-by: Chen-Yu Tsai <wens@...nel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@...il.com>
Best regards,
Jernej
> ---
> drivers/clk/sunxi-ng/ccu-sun55i-a523.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> index acb532f8361b..20dad06b37ca 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> @@ -300,7 +300,7 @@ static struct ccu_nm pll_audio0_4x_clk = {
> .m = _SUNXI_CCU_DIV(16, 6),
> .sdm = _SUNXI_CCU_SDM(pll_audio0_sdm_table, BIT(24),
> 0x178, BIT(31)),
> - .min_rate = 180000000U,
> + .min_rate = 90000000U,
> .max_rate = 3000000000U,
> .common = {
> .reg = 0x078,
>
Powered by blists - more mailing lists