[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251021105022.1013685-10-rf@opensource.cirrus.com>
Date: Tue, 21 Oct 2025 11:50:20 +0100
From: Richard Fitzgerald <rf@...nsource.cirrus.com>
To: broonie@...nel.org, tiwai@...e.com
Cc: linux-sound@...r.kernel.org, linux-kernel@...r.kernel.org,
patches@...nsource.cirrus.com
Subject: [PATCH v2 09/11] ASoC: cs35l56: Add calibration command to store into UEFI
Add a new command 'store_uefi' to the calibrate debugfs file.
Writing this command will call cs_amp_set_efi_calibration_data()
to save the new data into a UEFI variable. This is intended to
be used after a successful factory calibration.
On systems without UEFI the write to the debugfs file will
return an error.
Signed-off-by: Richard Fitzgerald <rf@...nsource.cirrus.com>
---
Changes since V1:
- Rebased onto the new debugfs callback implementation
- Only code change since V1 is to increase the size of the local
char array buf[].
include/sound/cs35l56.h | 1 +
sound/soc/codecs/cs35l56-shared.c | 21 ++++++++++++++++++---
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/include/sound/cs35l56.h b/include/sound/cs35l56.h
index 349b896ee737..82559be0f249 100644
--- a/include/sound/cs35l56.h
+++ b/include/sound/cs35l56.h
@@ -321,6 +321,7 @@ struct cs35l56_base {
bool can_hibernate;
bool cal_data_valid;
s8 cal_index;
+ u8 num_amps;
struct cirrus_amp_cal_data cal_data;
struct gpio_desc *reset_gpio;
struct cs35l56_spi_payload *spi_payload_buf;
diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c
index eeb830e3f743..bbacac6bda81 100644
--- a/sound/soc/codecs/cs35l56-shared.c
+++ b/sound/soc/codecs/cs35l56-shared.c
@@ -1105,9 +1105,9 @@ ssize_t cs35l56_calibrate_debugfs_write(struct cs35l56_base *cs35l56_base,
const char __user *from, size_t count,
loff_t *ppos)
{
- static const char * const options[] = { "factory" };
- char buf[8] = { 0 };
- int ret;
+ static const char * const options[] = { "factory", "store_uefi" };
+ char buf[11] = { 0 };
+ int num_amps, ret;
if (!IS_ENABLED(CONFIG_SND_SOC_CS35L56_CAL_DEBUGFS_COMMON))
return -ENXIO;
@@ -1125,6 +1125,21 @@ ssize_t cs35l56_calibrate_debugfs_write(struct cs35l56_base *cs35l56_base,
if (ret < 0)
return ret;
break;
+ case 1:
+ if (!cs35l56_base->cal_data_valid)
+ return -ENODATA;
+
+ num_amps = cs35l56_base->num_amps;
+ if (num_amps == 0)
+ num_amps = -1;
+
+ ret = cs_amp_set_efi_calibration_data(cs35l56_base->dev,
+ cs35l56_base->cal_index,
+ num_amps,
+ &cs35l56_base->cal_data);
+ if (ret < 0)
+ return ret;
+ break;
default:
return -ENXIO;
}
--
2.47.3
Powered by blists - more mailing lists