linux-kernel - Re: [PATCH] PCI/ASPM: Enable only L0s and L1 for devicetree platforms

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251022191313.GA1265088@bhelgaas>
Date: Wed, 22 Oct 2025 14:13:13 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>
Cc: Christian Zigotzky <chzigotzky@...osoft.de>,
	FUKAUMI Naoki <naoki@...xa.com>, linux-rockchip@...r.kernel.org,
	linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
	Bjorn Helgaas <bhelgaas@...gle.com>
Subject: Re: [PATCH] PCI/ASPM: Enable only L0s and L1 for devicetree platforms

Christian, Naoki, any chance you could test this patch on top of
v6.18-rc1 to see whether it resolves the problem you reported?

I'd like to verify that it works before merging it.

On Mon, Oct 20, 2025 at 05:12:07PM -0500, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@...gle.com>
> 
> f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree
> platforms") enabled Clock Power Management and L1 Substates, but that
> caused regressions because these features depend on CLKREQ#, and not all
> devices and form factors support it.
> 
> Enable only ASPM L0s and L1, and only when both ends of the link advertise
> support for them.
> 
> Fixes: f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms")
> Reported-by: Christian Zigotzky <chzigotzky@...osoft.de>
> Link: https://lore.kernel.org/r/db5c95a1-cf3e-46f9-8045-a1b04908051a@xenosoft.de/
> Reported-by: FUKAUMI Naoki <naoki@...xa.com>
> Link: https://lore.kernel.org/r/22594781424C5C98+22cb5d61-19b1-4353-9818-3bb2b311da0b@radxa.com/
> ---
> 
> Mani, not sure what you think we should do here.  Here's a stab at it as a
> strawman and in case anybody can test it.
> 
> Not sure about the message log message.  Maybe OK for testing, but might be
> overly verbose ultimately.
> 
> ---
>  drivers/pci/pcie/aspm.c | 34 +++++++++-------------------------
>  1 file changed, 9 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> index 7cc8281e7011..dbc74cc85bcb 100644
> --- a/drivers/pci/pcie/aspm.c
> +++ b/drivers/pci/pcie/aspm.c
> @@ -243,8 +243,7 @@ struct pcie_link_state {
>  	/* Clock PM state */
>  	u32 clkpm_capable:1;		/* Clock PM capable? */
>  	u32 clkpm_enabled:1;		/* Current Clock PM state */
> -	u32 clkpm_default:1;		/* Default Clock PM state by BIOS or
> -					   override */
> +	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
>  	u32 clkpm_disable:1;		/* Clock PM disabled */
>  };
>  
> @@ -376,18 +375,6 @@ static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
>  	pcie_set_clkpm_nocheck(link, enable);
>  }
>  
> -static void pcie_clkpm_override_default_link_state(struct pcie_link_state *link,
> -						   int enabled)
> -{
> -	struct pci_dev *pdev = link->downstream;
> -
> -	/* For devicetree platforms, enable ClockPM by default */
> -	if (of_have_populated_dt() && !enabled) {
> -		link->clkpm_default = 1;
> -		pci_info(pdev, "ASPM: DT platform, enabling ClockPM\n");
> -	}
> -}
> -
>  static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
>  {
>  	int capable = 1, enabled = 1;
> @@ -410,7 +397,6 @@ static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
>  	}
>  	link->clkpm_enabled = enabled;
>  	link->clkpm_default = enabled;
> -	pcie_clkpm_override_default_link_state(link, enabled);
>  	link->clkpm_capable = capable;
>  	link->clkpm_disable = blacklist ? 1 : 0;
>  }
> @@ -811,19 +797,17 @@ static void pcie_aspm_override_default_link_state(struct pcie_link_state *link)
>  	struct pci_dev *pdev = link->downstream;
>  	u32 override;
>  
> -	/* For devicetree platforms, enable all ASPM states by default */
> +	/* For devicetree platforms, enable L0s and L1 by default */
>  	if (of_have_populated_dt()) {
> -		link->aspm_default = PCIE_LINK_STATE_ASPM_ALL;
> +		if (link->aspm_support & PCIE_LINK_STATE_L0S)
> +			link->aspm_default |= PCIE_LINK_STATE_L0S;
> +		if (link->aspm_support & PCIE_LINK_STATE_L1)
> +			link->aspm_default |= PCIE_LINK_STATE_L1;
>  		override = link->aspm_default & ~link->aspm_enabled;
>  		if (override)
> -			pci_info(pdev, "ASPM: DT platform, enabling%s%s%s%s%s%s%s\n",
> -				 FLAG(override, L0S_UP, " L0s-up"),
> -				 FLAG(override, L0S_DW, " L0s-dw"),
> -				 FLAG(override, L1, " L1"),
> -				 FLAG(override, L1_1, " ASPM-L1.1"),
> -				 FLAG(override, L1_2, " ASPM-L1.2"),
> -				 FLAG(override, L1_1_PCIPM, " PCI-PM-L1.1"),
> -				 FLAG(override, L1_2_PCIPM, " PCI-PM-L1.2"));
> +			pci_info(pdev, "ASPM: DT platform, enabling%s%s\n",
> +				 FLAG(override, L0S, " L0s"),
> +				 FLAG(override, L1, " L1"));
>  	}
>  }
>  
> -- 
> 2.43.0
>