linux-kernel - [PATCH] arm64: dts: renesas: rzt2h/rzn2h-evk: add note about SD1 1.8V modes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20251022073141.1989762-1-cosmin-gabriel.tanislav.xa@renesas.com>
Date: Wed, 22 Oct 2025 10:31:40 +0300
From: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@...esas.com>
To: 
Cc: Geert Uytterhoeven <geert+renesas@...der.be>,
	Magnus Damm <magnus.damm@...il.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-renesas-soc@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Cosmin Tanislav <cosmin-gabriel.tanislav.xa@...esas.com>
Subject: [PATCH] arm64: dts: renesas: rzt2h/rzn2h-evk: add note about SD1 1.8V modes

1.8V operation of SD1 requires the jumper to be placed on the correct
pins of a connector on these Evaluation Kits. 1.8V is needed to achieve
the higher rated speeds like SDR104. Add a note about it to make sure no
one else spends too much time figuring this out.

Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@...esas.com>
---
 arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts | 3 +++
 arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
index e94b84393bd9..7269bca8c8cc 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -26,6 +26,9 @@
  * P17_4 = SD1_CD; SW2[3] = ON
  * P08_5 = SD1_PWEN; SW2[3] = ON
  * P08_6 = SD1_IOVS; SW2[3] = ON; SW5[3] = OFF; SW5[4] = ON
+ * To enable proper operation in 1.8V modes, CN77 must have pins 2 and 3
+ * connected by the jumper. This connects SD1 power-supply control IC output
+ * back to VCC1833_7.
  */
 #define SD1_MICRO_SD	1
 
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
index d27da157c6d6..c87cb6510edc 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
@@ -30,6 +30,9 @@
 /*
  * P17_4 = SD1_CD; DSW5[3] = ON; DSW19[1] = OFF; DSW19[2] = ON
  * P08_6 = SD1_IOVS; DSW5[3] = ON
+ * To enable proper operation in 1.8V modes, JP21 must have pins 2 and 3
+ * connected by the jumper. This connects SD1 power-supply control IC output
+ * back to VCC1833_7.
  */
 #define SD1_MICRO_SD	1
 
-- 
2.51.1.dirty