linux-kernel - Re: [REGRESSION][BISECTED] Screen goes blank with ASpeed AST2300 in 6.18-rc2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <bf827c5c-c4dd-46f1-962d-3a8e2a0a7fdf@suse.de>
Date: Wed, 22 Oct 2025 11:11:56 +0200
From: Thomas Zimmermann <tzimmermann@...e.de>
To: Peter Schneider <pschneider1968@...glemail.com>,
 regressions@...ts.linux.dev, LKML <linux-kernel@...r.kernel.org>
Cc: dri-devel@...ts.freedesktop.org, stable@...r.kernel.org,
 jfalempe@...hat.com, airlied@...hat.com, dianders@...omium.org,
 nbowler@...conx.ca, Linus Torvalds <torvalds@...ux-foundation.org>,
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
 Thorsten Leemhuis <regressions@...mhuis.info>
Subject: Re: [REGRESSION][BISECTED] Screen goes blank with ASpeed AST2300 in
 6.18-rc2

Hi

Am 22.10.25 um 10:08 schrieb Peter Schneider:
> Hi Thomas,
>
> thanks very much for your quick response!
>
> (adding Thorsten to CC)
>
>
> Am 22.10.2025 um 08:51 schrieb Thomas Zimmermann:
>> Hi
>>
>> Am 22.10.25 um 05:27 schrieb Peter Schneider:
>>> #regzbot introduced: 6f719373b943a955fee6fc2012aed207b65e2854
>>>
>>> Hi all,
>>>
>>> I have encountered a serious (for me) regression with 6.18-rc2 on my 
>>> 2-socket Ivy Bridge Xeon E5-2697 v2 server. After booting, my 
>>> console screen goes blank and stays blank. 6.18-rc1 was still fine.
>>>
>>> The machine has an Asus Z9PE-D16 server mainboard with an onboard 
>>> ASpeed AST2300 VGA chip with 16MB VRAM. I have attached an older HP 
>>> Monitor to it via old VGA jack/cable. It also has a second graphics 
>>> card in a PCI-E slot; an older NVidia GTX 560. It is not connected 
>>> to a monitor, but I have configured it via kernel command line for 
>>> PCI-pass- through to VMs running on this server (I use Proxmox VE, 
>>> i.e. QEMU/KVM virtual machines). Currently, no VMs use this yet, and 
>>> also no VMs are autostarting with machine boot. So when this 
>>> regression occurs, the server is idle. Pressing a key on the 
>>> keyboard does not make the screen come alive. The server is running 
>>> fine though, and I can access it via SSH. It just has no graphic 
>>> output anymore. In case this is important, the machine also has a 
>>> ASMB6 BMC (can be used via http).
>>>
>>> I have attached dmesg output from both 6.18-rc1 which is fine, and 
>>> 6.18-rc2 which exhibits this bug. I have bisected the issue, please 
>>> see attached git bisect.log.
>>
>> Thanks for the detailed bug report.
>>
>> Attached is a patch that partially reverts the broken commit. Could 
>> you please apply it on top of the broken kernel and report on the 
>> results?
>>
>> Best regards
>> Thomas
>
>
> Your patch applied cleanly against 6.18-rc2 and the kernel built fine, 
> but unfortunately it did not solve the issue: my console screen stays 
> blank after booting. This is regardless whether I do a soft reboot, 
> press the reset button or power cycle and do a cold boot. They are all 
> the same.

Just to be sure: you do see output at the early boot stages (BIOS, boot 
loader). It's at some later point during boot, the driver loads and the 
display blanks out?

There's another patch attached. does this make a difference?

Best regards
Thomas

>
>
> Beste Grüße,
> Peter Schneider
>

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)


View attachment "0001-v2-ast-Set-clear-screen-disable-bit.patch" of type "text/x-patch" (1926 bytes)