| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251023143957.2899600-1-robh@kernel.org>
Date: Thu, 23 Oct 2025 09:37:56 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
David Airlie <airlied@...il.com>,
Simona Vetter <simona@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Thomas Zimmermann <tzimmermann@...e.de>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Robert Foss <rfoss@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
Moritz Fischer <mdf@...nel.org>,
Xu Yilun <yilun.xu@...el.com>,
Bartosz Golaszewski <brgl@...ev.pl>,
Guenter Roeck <linux@...ck-us.net>,
Andi Shyti <andi.shyti@...nel.org>,
Jonathan Cameron <jic23@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Georgi Djakov <djakov@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Joerg Roedel <joro@...tes.org>,
Jassi Brar <jassisinghbrar@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Lee Jones <lee@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Johannes Berg <johannes@...solutions.net>,
Krzysztof Wilczyński <kwilczynski@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Sebastian Reichel <sre@...nel.org>,
Uwe Kleine-König <ukleinek@...nel.org>,
Mark Brown <broonie@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Olivia Mackall <olivia@...enic.com>,
Herbert Xu <herbert@...dor.apana.org.au>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
linux-fbdev@...r.kernel.org,
dmaengine@...r.kernel.org,
linux-fpga@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-hwmon@...r.kernel.org,
linux-i2c@...r.kernel.org,
linux-iio@...r.kernel.org,
linux-input@...r.kernel.org,
linux-pm@...r.kernel.org,
iommu@...ts.linux.dev,
linux-media@...r.kernel.org,
linux-mtd@...ts.infradead.org,
netdev@...r.kernel.org,
linux-wireless@...r.kernel.org,
linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org,
linux-pwm@...r.kernel.org,
linux-remoteproc@...r.kernel.org,
linux-crypto@...r.kernel.org,
linux-sound@...r.kernel.org,
linux-usb@...r.kernel.org
Subject: [PATCH] dt-bindings: Remove extra blank lines
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
Documentation/devicetree/bindings/.yamllint | 2 +-
Documentation/devicetree/bindings/arm/psci.yaml | 1 -
.../bindings/clock/allwinner,sun4i-a10-gates-clk.yaml | 1 -
.../devicetree/bindings/clock/renesas,cpg-mssr.yaml | 1 -
.../devicetree/bindings/clock/xlnx,clocking-wizard.yaml | 1 -
.../display/allwinner,sun4i-a10-display-frontend.yaml | 1 -
.../devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml | 1 -
.../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 1 -
.../devicetree/bindings/display/amlogic,meson-vpu.yaml | 1 -
.../devicetree/bindings/display/bridge/adi,adv7511.yaml | 1 -
.../devicetree/bindings/display/bridge/lvds-codec.yaml | 1 -
.../devicetree/bindings/display/bridge/toshiba,tc358767.yaml | 1 -
.../devicetree/bindings/display/ilitek,ili9486.yaml | 1 -
Documentation/devicetree/bindings/display/msm/gpu.yaml | 1 -
.../devicetree/bindings/display/panel/panel-timing.yaml | 1 -
.../devicetree/bindings/display/panel/tpo,tpg110.yaml | 1 -
.../devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml | 1 -
.../devicetree/bindings/display/simple-framebuffer.yaml | 1 -
.../devicetree/bindings/dma/snps,dma-spear1340.yaml | 1 -
Documentation/devicetree/bindings/dma/stericsson,dma40.yaml | 1 -
.../devicetree/bindings/dma/stm32/st,stm32-dma.yaml | 1 -
Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml | 1 -
.../devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml | 1 -
Documentation/devicetree/bindings/fpga/fpga-region.yaml | 5 -----
.../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 1 -
.../devicetree/bindings/gpio/fairchild,74hc595.yaml | 1 -
Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 1 -
Documentation/devicetree/bindings/hwmon/adi,max31827.yaml | 1 -
Documentation/devicetree/bindings/hwmon/national,lm90.yaml | 1 -
Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 1 -
Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml | 1 -
Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml | 1 -
.../devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml | 1 -
Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml | 2 --
Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml | 1 -
Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 1 -
Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml | 1 -
Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml | 1 -
.../devicetree/bindings/iio/adc/cosmic,10001-adc.yaml | 1 -
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml | 1 -
.../devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml | 1 -
.../devicetree/bindings/iio/afe/voltage-divider.yaml | 1 -
.../devicetree/bindings/iio/frequency/adi,admv4420.yaml | 1 -
.../devicetree/bindings/iio/pressure/murata,zpa2326.yaml | 1 -
.../devicetree/bindings/iio/proximity/semtech,sx9324.yaml | 1 -
.../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 1 -
Documentation/devicetree/bindings/input/ti,drv266x.yaml | 1 -
.../devicetree/bindings/interconnect/qcom,rpmh.yaml | 1 -
.../devicetree/bindings/interrupt-controller/arm,gic-v3.yaml | 1 -
.../bindings/interrupt-controller/aspeed,ast2700-intc.yaml | 1 -
.../bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml | 1 -
.../bindings/interrupt-controller/loongson,liointc.yaml | 1 -
.../bindings/interrupt-controller/mediatek,mtk-cirq.yaml | 1 -
.../bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml | 1 -
Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 4 ----
Documentation/devicetree/bindings/mailbox/arm,mhu.yaml | 1 -
Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml | 1 -
Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml | 1 -
Documentation/devicetree/bindings/media/amphion,vpu.yaml | 1 -
Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml | 2 --
.../devicetree/bindings/media/i2c/techwell,tw9900.yaml | 1 -
Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml | 1 -
.../devicetree/bindings/media/qcom,sc8280xp-camss.yaml | 1 -
.../bindings/media/samsung,exynos4212-fimc-is.yaml | 1 -
.../devicetree/bindings/media/samsung,s5pv210-jpeg.yaml | 1 -
Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml | 1 -
.../devicetree/bindings/media/video-interface-devices.yaml | 4 ----
.../memory-controllers/qcom,ebi2-peripheral-props.yaml | 1 -
Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml | 1 -
.../devicetree/bindings/mtd/amlogic,meson-nand.yaml | 1 -
.../devicetree/bindings/mtd/marvell,nand-controller.yaml | 1 -
Documentation/devicetree/bindings/mux/mux-controller.yaml | 1 -
.../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 2 --
Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml | 1 -
.../devicetree/bindings/net/brcm,mdio-mux-iproc.yaml | 1 -
.../devicetree/bindings/net/cortina,gemini-ethernet.yaml | 1 -
Documentation/devicetree/bindings/net/fsl,gianfar.yaml | 2 --
.../devicetree/bindings/net/mdio-mux-multiplexer.yaml | 1 -
Documentation/devicetree/bindings/net/qcom,ipa.yaml | 1 -
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml | 1 -
.../devicetree/bindings/net/wireless/ti,wlcore.yaml | 1 -
.../devicetree/bindings/pci/altr,pcie-root-port.yaml | 1 -
Documentation/devicetree/bindings/pci/loongson.yaml | 1 -
Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml | 1 -
.../devicetree/bindings/pci/starfive,jh7110-pcie.yaml | 1 -
Documentation/devicetree/bindings/pci/versatile.yaml | 1 -
.../bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 1 -
.../devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml | 1 -
.../devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml | 1 -
.../devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml | 1 -
.../bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml | 1 -
.../devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml | 1 -
.../devicetree/bindings/pinctrl/renesas,rza1-ports.yaml | 3 ---
.../devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 1 -
.../devicetree/bindings/power/supply/mt6360_charger.yaml | 1 -
.../bindings/power/supply/stericsson,ab8500-charger.yaml | 1 -
.../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 1 -
.../bindings/regulator/richtek,rt6245-regulator.yaml | 1 -
.../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml | 2 --
Documentation/devicetree/bindings/reset/ti,sci-reset.yaml | 1 -
.../bindings/rng/inside-secure,safexcel-eip76.yaml | 2 --
.../devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml | 1 -
.../devicetree/bindings/soc/mediatek/mediatek,mutex.yaml | 1 -
.../bindings/soc/microchip/atmel,at91rm9200-tcb.yaml | 1 -
Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 1 -
Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml | 3 ---
Documentation/devicetree/bindings/sound/adi,adau1372.yaml | 1 -
Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 1 -
.../devicetree/bindings/sound/rockchip,i2s-tdm.yaml | 1 -
.../devicetree/bindings/sound/rockchip,rk3328-codec.yaml | 2 +-
Documentation/devicetree/bindings/sound/samsung,tm2.yaml | 1 -
.../devicetree/bindings/sound/ti,tlv320dac3100.yaml | 1 -
Documentation/devicetree/bindings/sound/wlf,wm8903.yaml | 1 -
.../devicetree/bindings/timer/nvidia,tegra-timer.yaml | 1 -
.../devicetree/bindings/timer/nvidia,tegra186-timer.yaml | 1 -
Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml | 1 -
116 files changed, 2 insertions(+), 136 deletions(-)
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint
index 532799501800..8f9dd18dfe04 100644
--- a/Documentation/devicetree/bindings/.yamllint
+++ b/Documentation/devicetree/bindings/.yamllint
@@ -30,7 +30,7 @@ rules:
document-start:
present: true
empty-lines:
- max: 3
+ max: 1
max-end: 1
empty-values:
forbid-in-block-mappings: true
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 7360a2849b5b..6e2e0c551841 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -163,7 +163,6 @@ examples:
method = "smc";
};
-
- |+
// Case 3: PSCI v0.2 and PSCI v0.1.
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index c4714d0fbe07..e588a7e8f260 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -132,7 +132,6 @@ examples:
"ahb_mp", "ahb_mali400";
};
-
- |
clk@...0068 {
#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index bc2fd3761328..655154534c0f 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -99,7 +99,6 @@ properties:
the datasheet.
const: 1
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
index b44a76a958f4..b497c28e8094 100644
--- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -22,7 +22,6 @@ properties:
- xlnx,clocking-wizard-v6.0
- xlnx,versal-clk-wizard
-
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
index 98e8240a05bd..995b3ef408b7 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -121,5 +121,4 @@ examples:
};
};
-
...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
index 895506d93f4c..85a6086cc10e 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -121,5 +121,4 @@ examples:
};
};
-
...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 60fd927b5a06..c43b02ec884f 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -142,7 +142,6 @@ then:
reset-names:
minItems: 2
-
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index cb0a90f02321..3ae45db85ea7 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -25,7 +25,6 @@ description: |
M |-------|______|----|____________| |________________| | |
___|__________________________________________________________|_______________|
-
VIU: Video Input Unit
---------------------
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index 5bbe81862c8f..d29a0d06187e 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -156,7 +156,6 @@ else:
adi,input-style: false
adi,input-justification: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 0487bbffd7f7..4f7d3e9cf0c2 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -131,7 +131,6 @@ required:
additionalProperties: false
-
examples:
- |
lvds-encoder {
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index b78f64c9c5f4..70f229dc4e0c 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -123,7 +123,6 @@ properties:
- required:
- port@1
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
index 9cc1fd0751cd..7d78edc403dc 100644
--- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -54,7 +54,6 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
-
display@0{
compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 3696b083e353..826aafdcc20b 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -133,7 +133,6 @@ properties:
For GMU attached devices a phandle to the GMU device that will
control the power for the GPU.
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index aea69b84ca5d..8c9774458777 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -41,7 +41,6 @@ description: |
| | | v | |
+-------+----------+-------------------------------------+----------+
-
The following is the panel timings shown with time on the x-axis.
This matches the timing diagrams often found in data sheets.
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
index 59a373728e62..99db268eb9b3 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -38,7 +38,6 @@ description: |+
The serial protocol has line names that resemble I2C but the
protocol is not I2C but 3WIRE SPI.
-
allOf:
- $ref: panel-common.yaml#
- $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
index a8a008717997..6345f0132d43 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
@@ -125,7 +125,6 @@ examples:
power-domains = <&power RK3588_PD_VO0>;
#sound-dai-cells = <0>;
-
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index 296500f9da05..45ffdebc9d86 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -181,7 +181,6 @@ allOf:
required:
- amlogic,pipeline
-
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index c21a4f073f6c..18c0a7c18bc8 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -22,7 +22,6 @@ properties:
- renesas,r9a06g032-dma
- const: renesas,rzn1-dma
-
"#dma-cells":
minimum: 3
maximum: 4
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
index 7b94d24d5ef4..8b42d9880400 100644
--- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -120,7 +120,6 @@ properties:
- description: LCPA memory base, deprecated, use eSRAM pool instead
deprecated: true
-
reg-names:
oneOf:
- items:
diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
index 11a289f1d505..598903354196 100644
--- a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
@@ -48,7 +48,6 @@ description: |
by transfer completion. This must only be used on channels
managing transfers for STM32 USART/UART.
-
maintainers:
- Amelie Delaunay <amelie.delaunay@...s.st.com>
diff --git a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
index 9afc78254cc0..9637df7af3c8 100644
--- a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
+++ b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
@@ -97,7 +97,6 @@ patternProperties:
- reg
- memory-controller
-
'^edacpmd@':
description: PMD subnode
type: object
diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
index 3faae3236665..c6fc1d6e25da 100644
--- a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
+++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -23,7 +23,6 @@ description: |
The authoritative guest-side hardware interface documentation to the fw_cfg
device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
-
properties:
compatible:
const: qemu,fw-cfg-mmio
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
index 7d2d3b7aa4b7..4c61461d6247 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
@@ -18,7 +18,6 @@ description: |
- Supported Use Models
- Constraints
-
Introduction
============
@@ -31,7 +30,6 @@ description: |
document isn't a replacement for any manufacturers specifications for FPGA
usage.
-
Terminology
===========
@@ -108,7 +106,6 @@ description: |
a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be
reprogrammed independently while the rest of the system continues to function.
-
Sequence
========
@@ -124,7 +121,6 @@ description: |
When the overlay is removed, the child nodes will be removed and the FPGA Region
will disable the bridges.
-
FPGA Region
===========
@@ -170,7 +166,6 @@ description: |
hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges
within the static image of the FPGA.
-
Supported Use Models
====================
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index c213cb9ddb9f..5cfefbbea6ca 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -66,5 +66,4 @@ examples:
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
};
-
...
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
index ab35bcf98101..23410aeca300 100644
--- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -22,7 +22,6 @@ description: |
___ ________
chip select# |___________________|
-
maintainers:
- Maxime Ripard <mripard@...nel.org>
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index 152935334c76..3e3f49cf2f52 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -81,7 +81,6 @@ required:
- compatible
- reg
-
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
index f60e06ab7d0a..c2f7c6ee1a37 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
@@ -93,7 +93,6 @@ allOf:
adi,fault-q:
default: 4
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
index 1b871f166e79..164068ba069d 100644
--- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -45,7 +45,6 @@ properties:
- ti,tmp461
- winbond,w83l771
-
interrupts:
items:
- description: |
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index cba5b4a1b81f..0fe6ea190f60 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -20,7 +20,6 @@ description: |
https://www.ti.com/lit/gpn/tmp513
https://www.ti.com/lit/gpn/tmp512
-
properties:
compatible:
enum:
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
index ee7de53e1918..d57e4bf8f65f 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -15,7 +15,6 @@ description: |
Datasheets:
https://www.ti.com/lit/gpn/tps23861
-
properties:
compatible:
enum:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
index b6af924dee2e..d8610daa10cd 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -27,7 +27,6 @@ description: |+
| '------' | | dev | | dev | | dev |
'------------' '-----' '-----' '-----'
-
allOf:
- $ref: /schemas/i2c/i2c-mux.yaml#
diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
index 17ce39c19ab1..f9a449fee2b0 100644
--- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
@@ -64,7 +64,6 @@ patternProperties:
required:
- reg
-
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
index 28139b676661..19cfffb39296 100644
--- a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
+++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
@@ -16,7 +16,6 @@ description: |
can be selected by writing the appropriate device number to an I2C config
register.
-
+--------------------------------------------------+
| Mule |
0x18| +---------------+ |
@@ -34,7 +33,6 @@ description: |
| |__/ +--------+ |
+--------------------------------------------------+
-
allOf:
- $ref: /schemas/i2c/i2c-mux.yaml#
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index 8dae89ecb64d..b91bfb16ed6b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -30,7 +30,6 @@ description: |
* https://www.analog.com/en/products/adaq4380-4.html
* https://www.analog.com/en/products/adaq4381-4.html
-
$ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 1180d2ffbf84..73c8e9c532f3 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -166,7 +166,6 @@ properties:
An example of backend can be found at
http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
-
patternProperties:
"^channel@[1-8]$":
type: object
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 9ee4d977c5ed..238a8c9c4143 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -48,7 +48,6 @@ properties:
enum: [2500000, 4096000]
default: 4096000
-
'#io-channel-cells':
const: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
index bd429552d568..f22eba0250ee 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
@@ -57,7 +57,6 @@ properties:
description: External clock source when not using crystal
maxItems: 1
-
"#clock-cells":
description:
ADE9000 can provide clock output via CLKOUT pin with external buffer.
diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
index 4e695b97d015..9ea44ce63f25 100644
--- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
@@ -36,7 +36,6 @@ properties:
"#io-channel-cells":
const: 1
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 17bb60e18a1c..c4c4575d3fa9 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -456,7 +456,6 @@ patternProperties:
items:
minimum: 40
-
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
index 1caa896fce82..de91cb03fdc6 100644
--- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -57,7 +57,6 @@ description: |
4 | batt_dischrg_i
5 | ts_v
-
properties:
compatible:
oneOf:
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index 4151f99b42aa..9752d1450064 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -29,7 +29,6 @@ description: |
|
GND
-
properties:
compatible:
const: voltage-divider
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
index 64f2352aac3d..ca40359a3944 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
@@ -37,7 +37,6 @@ required:
- compatible
- reg
-
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
index c33640ddde58..886f4129c301 100644
--- a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
@@ -12,7 +12,6 @@ maintainers:
description: |
Pressure sensor from Murata with SPI and I2C bus interfaces.
-
properties:
compatible:
const: murata,zpa2326
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
index 48f221463166..8fed45ee557b 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -78,7 +78,6 @@ properties:
minItems: 3
maxItems: 3
-
semtech,ph01-resolution:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [8, 16, 32, 64, 128, 256, 512, 1024]
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index ee0b558bb866..a22725f7619b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -39,7 +39,6 @@ $defs:
- reg
- adi,sensor-type
-
properties:
compatible:
oneOf:
diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
index da1818824373..1bce389d0e5c 100644
--- a/Documentation/devicetree/bindings/input/ti,drv266x.yaml
+++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
@@ -37,7 +37,6 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
-
i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index dad3ad2fd93b..da16d8e9bdc5 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -122,7 +122,6 @@ allOf:
required:
- reg
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index f3247a47f9ee..bfd30aae682b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -305,7 +305,6 @@ examples:
};
};
-
device@0 {
reg = <0 4>;
interrupts = <1 1 4 &part0>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
index 55636d06a674..c45e97e2f583 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
@@ -53,7 +53,6 @@ properties:
| |---...
+---------+---module31
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
index fdc254f8d013..55b1ae863b91 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
@@ -14,7 +14,6 @@ description:
Vybrid SoC's but is only really useful in dual core configurations (VF6xx
which comes with a Cortex-A5/Cortex-M4 combination).
-
maintainers:
- Frank Li <Frank.Li@....com>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 60441f0c5d72..f63b23f48d8e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -78,7 +78,6 @@ required:
- '#interrupt-cells'
- loongson,parent_int_map
-
unevaluatedProperties: false
if:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
index fdcb4d8db818..20dfffb34f0c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -18,7 +18,6 @@ description:
flush command is executed. With CIRQ, MCUSYS can be completely turned off
to improve the system power consumption without losing interrupts.
-
properties:
compatible:
items:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
index 4ff609faba32..d943ea820cdd 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -26,7 +26,6 @@ properties:
- mscc,ocelot-icpu-intr
- mscc,serval-icpu-intr
-
'#interrupt-cells':
const: 1
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 89495f094d52..f8bd24d5949e 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -638,7 +638,6 @@ examples:
<&smmu1 7>;
};
-
/* SMMU with stream matching */
smmu2: iommu@...f0000 {
compatible = "arm,smmu-v1";
@@ -664,7 +663,6 @@ examples:
iommus = <&smmu2 1 0x30>;
};
-
/* ARM MMU-500 with 10-bit stream ID input configuration */
smmu3: iommu@...00000 {
compatible = "arm,mmu-500", "arm,smmu-v2";
@@ -685,8 +683,6 @@ examples:
/* bus whose child devices emit one unique 10-bit stream
ID each, but may master through multiple SMMU TBUs */
iommu-map = <0 &smmu3 0 0x400>;
-
-
};
- |+
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
index d9a4f4a02d7c..e45b661e8b41 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -52,7 +52,6 @@ properties:
- const: arm,mhu-doorbell
- const: arm,primecell
-
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
index 02f06314d85f..3828d77f6316 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
@@ -127,7 +127,6 @@ properties:
- minimum: 0
maximum: 124
-
'#mbox-cells':
description: |
It is always set to 2. The first argument in the consumers 'mboxes'
diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
index 8a1369df4ecb..4ca0d5e49c79 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
@@ -26,7 +26,6 @@ properties:
- mediatek,mt8188-adsp-mbox
- const: mediatek,mt8186-adsp-mbox
-
"#mbox-cells":
const: 0
diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
index 5a920d9e78c7..fa18013d705d 100644
--- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml
+++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
@@ -45,7 +45,6 @@ patternProperties:
between driver and firmware. Implement via mailbox on driver.
$ref: /schemas/mailbox/fsl,mu.yaml#
-
"^vpu-core@[0-9a-f]+$":
description:
Each core correspond a decoder or encoder, need to configure them
diff --git a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
index 2dc2829d42a0..f8d9889dbc21 100644
--- a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
@@ -154,7 +154,5 @@ examples:
};
};
};
-
-
};
};
diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
index c9673391afdb..0592d0b9af92 100644
--- a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
@@ -70,7 +70,6 @@ properties:
$ref: /schemas/graph.yaml#/properties/port
description: Video port for the decoder output.
-
required:
- port@0
- port@1
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 4cba42ba7cf7..b5aca3d2cc5c 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -79,7 +79,6 @@ allOf:
power-domains:
minItems: 2 # Wrapper and 1 slot
-
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
index d195f1bfb23d..c99fe4106eee 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
@@ -484,7 +484,6 @@ examples:
"gcc_axi_hf",
"gcc_axi_sf";
-
iommus = <&apps_smmu 0x2000 0x4e0>,
<&apps_smmu 0x2020 0x4e0>,
<&apps_smmu 0x2040 0x4e0>,
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
index 71d63bb9abb5..32e72d11bd19 100644
--- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
@@ -111,7 +111,6 @@ patternProperties:
reg:
maxItems: 1
-
clocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
index e28d6ec56c0b..5c969e764d4f 100644
--- a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
@@ -42,7 +42,6 @@ properties:
reg:
maxItems: 1
-
required:
- compatible
- clocks
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
index 4afa4a24b868..b9f7d84f38c2 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
@@ -21,7 +21,6 @@ description:
format and copy the result into a part or the whole of a destination image
with a different color format. (TODO)
-
maintainers:
- Dillon Min <dillon.minfei@...il.com>
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
index 3ad1590b0496..a81d2a155fe6 100644
--- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -128,7 +128,6 @@ properties:
0 degrees camera rotation:
-
Y-Rp
^
Y-Rc !
@@ -145,7 +144,6 @@ properties:
0 +------------------------------------->
0 X-Rc
-
X-Rc 0
<------------------------------------+ 0
X-Rp 0 !
@@ -228,7 +226,6 @@ properties:
V
X-Rc
-
Example one - Webcam
A camera module installed on the user facing part of a laptop screen
@@ -273,7 +270,6 @@ properties:
optical inversion, the two reference systems will not be aligned, with
'Rp' being rotated 180 degrees relatively to 'Rc':
-
X-Rc 0
<------------------------------------+ 0
!
diff --git a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
index 29f8c30e8a88..aec88cd2df76 100644
--- a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
@@ -62,7 +62,6 @@ properties:
minimum: 0
maximum: 15
-
# FAST chip selects
qcom,xmem-address-hold-enable:
$ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
index b2cfa4120b8a..ce5e845ab5c5 100644
--- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -444,7 +444,6 @@ properties:
additionalProperties: false
-
regulator-external:
description: Node describing the AB8500 external regulators. This
concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
index 284f0f882c32..fa2aa29be794 100644
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -88,7 +88,6 @@ patternProperties:
amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
index 1ecea848e8b9..bc89cbf8193a 100644
--- a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
@@ -145,7 +145,6 @@ allOf:
clock-names:
minItems: 1
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
index 571ad9e13ecf..78340bbe4df6 100644
--- a/Documentation/devicetree/bindings/mux/mux-controller.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -20,7 +20,6 @@ description: |
space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
0-7 for an 8-way multiplexer, etc.
-
Mux controller nodes
--------------------
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index fc62fb2a68ac..323a669fa982 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -201,7 +201,6 @@ allOf:
- clocks
- resets
-
mdio@2:
$ref: mdio.yaml#
unevaluatedProperties: false
@@ -251,7 +250,6 @@ allOf:
maxItems: 1
power-domains: false
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
index 0e3fb4e42e3f..a1119c47e29b 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -31,7 +31,6 @@ properties:
- description: RX and TX rings interrupt line
- description: Wake-on-LAN interrupt line
-
clocks:
minItems: 1
items:
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
index 3f27746d9a56..d544f785e6b9 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -29,7 +29,6 @@ properties:
maxItems: 1
description: core clock driving the MDIO block
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
index 44fd23a5fa2b..a930358f6a66 100644
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
@@ -100,7 +100,6 @@ examples:
};
};
-
ethernet@...00000 {
compatible = "cortina,gemini-ethernet";
reg = <0x60000000 0x4000>, /* Global registers, queue */
diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml
index f92f284aa05b..0d8909770ccb 100644
--- a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml
@@ -167,8 +167,6 @@ allOf:
- description: Receive interrupt
- description: Error interrupt
-
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
index 282987074ee4..23947ba6aeaf 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
@@ -14,7 +14,6 @@ description: |+
of a mux producer device. The mux producer can be of any type like mmio mux
producer, gpio mux producer or generic register based mux producer.
-
allOf:
- $ref: /schemas/net/mdio-mux.yaml#
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b4a79912d473..c7f5f2ef7452 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -24,7 +24,6 @@ description:
iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU
bindings.
-
- |
-------- ---------
| | | |
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index d14ca81f70e0..8b5da602a2e8 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -156,7 +156,6 @@ patternProperties:
CPSW MDIO bus.
$ref: ti,davinci-mdio.yaml#
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
index 75c9489f319b..9de5fdefcbcc 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -50,7 +50,6 @@ properties:
Points to the node of the regulator that powers/enable the wl12xx/wl18xx
chip. This is required when connected via SPI.
-
ref-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
description: Reference clock frequency.
diff --git a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
index 5d3f48a001b7..f516db47ab20 100644
--- a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
+++ b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
@@ -93,7 +93,6 @@ allOf:
reg-names:
minItems: 3
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml
index 1988465e73a1..e5bba63aa947 100644
--- a/Documentation/devicetree/bindings/pci/loongson.yaml
+++ b/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -32,7 +32,6 @@ properties:
minItems: 1
maxItems: 3
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 6c6d828ce964..def513d29d26 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -121,7 +121,6 @@ allOf:
- const: dma2
- const: dma3
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
index 5f432452c815..33c80626e8ec 100644
--- a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
@@ -16,7 +16,6 @@ properties:
compatible:
const: starfive,jh7110-pcie
-
reg:
maxItems: 2
diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml
index 294c7cd84b37..d30b8849db91 100644
--- a/Documentation/devicetree/bindings/pci/versatile.yaml
+++ b/Documentation/devicetree/bindings/pci/versatile.yaml
@@ -90,5 +90,4 @@ examples:
<0x0000 0 0 4 &sic 28>;
};
-
...
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index a1b55168e050..863a1a446739 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -35,7 +35,6 @@ properties:
- qcom,sm8350-qmp-usb3-uni-phy
- qcom,x1e80100-qmp-usb3-uni-phy
-
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
index 1283a588416d..a2e609b066ee 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
@@ -116,7 +116,6 @@ patternProperties:
input-schmitt-enable: false
input-schmitt-disable: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml
index a438db8884f2..96e7b6995273 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml
@@ -58,7 +58,6 @@ patternProperties:
- description: |
"pad_setting" indicates the pad configuration value to be applied.
-
required:
- fsl,pins
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
index 4009501b3414..63e96d60bfaa 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -142,7 +142,6 @@ examples:
interrupt-controller;
#interrupt-cells = <2>;
-
blsp1-i2c1-default-state {
pins = "gpio24", "gpio25";
function = "blsp_i2c1";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
index f4cf2ce86fcd..d3e4926034a7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
@@ -66,7 +66,6 @@ $defs:
Specify the alternative function to be configured for the specified
pins.
-
allOf:
- $ref: qcom,lpass-lpi-common.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
index ddeaeaa9a450..5a57a59cc1e5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -88,7 +88,6 @@ $defs:
uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
-
required:
- pins
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
index 737eb4e14090..8203c3c46cc7 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -65,7 +65,6 @@ patternProperties:
- '#gpio-cells'
- gpio-ranges
-
additionalProperties:
anyOf:
- type: object
@@ -150,7 +149,6 @@ examples:
pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
};
-
/*
* I2c master: both SDA and SCL pins need bi-directional operations
* Pin #4 on port #1 is configured as alternate function #1.
@@ -162,7 +160,6 @@ examples:
pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
};
-
/*
* Multi-function timer input and output compare pins.
*/
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
index f3258f2fd3a4..3f14eab01c54 100644
--- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -32,7 +32,6 @@ description: |
| | | | | | -------
UART0 UART1 --
-
The big MUX in the diagram only has 7 different ways of mapping peripherals
on the left to pins on the right. StarFive calls the 7 configurations "signal
groups".
diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
index 4c74cc78729e..3e8689019251 100644
--- a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
@@ -21,7 +21,6 @@ properties:
description: Maximum CHGIN regulation voltage in uV.
enum: [ 5500000, 6500000, 11000000, 14500000 ]
-
usb-otg-vbus-regulator:
type: object
description: OTG boost regulator.
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
index 994fac12c8da..4f19744844e9 100644
--- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -65,7 +65,6 @@ properties:
- const: vbus_v
- const: usb_charger_c
-
required:
- compatible
- monitored-battery
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 1b192e197b11..1197858e431f 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -55,7 +55,6 @@ properties:
resets:
maxItems: 1
-
allOf:
- $ref: pwm.yaml#
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index b73762e151bb..84546fec3b18 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -55,7 +55,6 @@ properties:
delay time 0us, 10us, 20us, 40us. If this property is missing then keep
in chip default.
-
richtek,switch-freq-select:
$ref: /schemas/types.yaml#/definitions/uint8
enum: [0, 1, 2]
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index a492f74a8608..a927551356e6 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -79,7 +79,6 @@ properties:
It should be set as 3 (Single-Core mode) which is also the default if
omitted.
-
# R5F Processor Child Nodes:
# ==========================
@@ -167,7 +166,6 @@ patternProperties:
- description: region reserved for firmware image sections
additionalItems: true
-
# Optional properties:
# --------------------
# The following properties are optional properties for each of the R5F cores:
diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
index 1db08ce9ae27..68640abacd95 100644
--- a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
@@ -40,7 +40,6 @@ properties:
Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
protocol documentation for the values to be used for different devices.
-
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml
index 0877eb44f9ed..f501fc7691c6 100644
--- a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml
+++ b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml
@@ -44,7 +44,6 @@ properties:
- const: core
- const: reg
-
allOf:
- if:
properties:
@@ -58,7 +57,6 @@ allOf:
required:
- interrupts
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
index cf0f38dbbe0d..2c06d869fdb5 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
@@ -30,7 +30,6 @@ properties:
$ref: /schemas/types.yaml#/definitions/string
enum: [host, slave]
-
patternProperties:
'^data\-only@[a-f0-9]+$':
type: object
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
index a10326a9683d..5267cfe92572 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
@@ -91,7 +91,6 @@ allOf:
required:
- clocks
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
index abf1adca0773..668b943db173 100644
--- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -105,7 +105,6 @@ patternProperties:
additionalProperties: false
-
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index dca5e27b8233..0b8e3294c83e 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -317,7 +317,6 @@ allOf:
properties:
clocks: false
-
examples:
- |
#include <dt-bindings/clock/rk3399-cru.h>
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index b5336bcbfb01..d97e88433d2f 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -11,7 +11,6 @@ maintainers:
- Suman Anna <s-anna@...com>
description: |+
-
The Programmable Real-Time Unit and Industrial Communication Subsystem
(PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x,
Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC
@@ -44,7 +43,6 @@ description: |+
integration within the IP and the SoC. These nodes are described in the
following sections.
-
PRU-ICSS Node
==============
Each PRU-ICSS instance is represented as its own node with the individual PRU
@@ -54,7 +52,6 @@ description: |+
See ../../mfd/syscon.yaml for generic SysCon binding details.
-
properties:
$nodename:
pattern: "^(pruss|icssg)@[0-9a-f]+$"
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
index ea62e51aba90..9a7ff50a0a22 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
@@ -4,7 +4,6 @@
$id: http://devicetree.org/schemas/sound/adi,adau1372.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-
title: Analog Devices ADAU1372 CODEC
maintainers:
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
index 12f60507aed7..11f59c29b575 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -4,7 +4,6 @@
$id: http://devicetree.org/schemas/sound/adi,adau7118.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-
title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter
maintainers:
diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
index 7bb6c5dff786..9435f395403a 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
@@ -135,7 +135,6 @@ properties:
the direction (input/output) needs to be dynamically adjusted.
type: boolean
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
index 5cdb8bcc687b..52e3f1f900c4 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
@@ -8,10 +8,10 @@ title: Rockchip rk3328 internal codec
maintainers:
- Heiko Stuebner <heiko@...ech.de>
+
allOf:
- $ref: dai-common.yaml#
-
properties:
compatible:
const: rockchip,rk3328-codec
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
index cbc7ba37362a..67586ba3e0a0 100644
--- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -30,7 +30,6 @@ properties:
- items:
- description: Phandle to the HDMI transmitter node.
-
samsung,audio-routing:
description: |
List of the connections between audio components; each entry is
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
index 85e937e34962..10299064cbc6 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
@@ -84,7 +84,6 @@ properties:
description: gpio pin number used for codec reset
deprecated: true
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
index 4cfa66f62681..089b67384797 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
@@ -75,7 +75,6 @@ properties:
DCVDD-supply:
description: Digital core supply regulator for the DCVDD pin.
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
index 9ea2ea3a7599..adf208b7a5b9 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
@@ -100,7 +100,6 @@ properties:
items:
- const: timer
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
index 76516e18e042..1d0bd36907ed 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -15,7 +15,6 @@ description: >
reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be
programmed to generate one-shot, periodic, or watchdog interrupts.
-
properties:
compatible:
oneOf:
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
index 6d3ef364672e..6d3fa2bc9cee 100644
--- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -28,7 +28,6 @@ properties:
- qcom,pm4125-typec
- const: qcom,pmi632-typec
-
connector:
type: object
$ref: /schemas/connector/usb-connector.yaml#
--
2.51.0
Powered by blists - more mailing lists