| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251023081736.1251-1-yuanjie.yang@oss.qualcomm.com>
Date: Thu, 23 Oct 2025 16:17:36 +0800
From: yuanjie yang <yuanjie.yang@....qualcomm.com>
To: robin.clark@....qualcomm.com, lumag@...nel.org, abhinav.kumar@...ux.dev,
sean@...rly.run, marijn.suijten@...ainline.org, airlied@...il.com,
simona@...ll.ch, maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
tzimmermann@...e.de, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, quic_mkrishn@...cinc.com, jonathan@...ek.ca,
quic_khsieh@...cinc.com, neil.armstrong@...aro.org
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, tingwei.zhang@....qualcomm.com,
aiqun.yu@....qualcomm.com, yongxing.mou@....qualcomm.com
Subject: [PATCH 12/12] dt-bindings: display/msm: qcom,kaanapali-mdss: Add Kaanapali
From: Yuanjie Yang <yuanjie.yang@....qualcomm.com>
Add MDSS/MDP display subsystem for Qualcomm Kaanapali.
Signed-off-by: Yongxing Mou <yongxing.mou@....qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@....qualcomm.com>
---
.../display/msm/qcom,kaanapali-mdss.yaml | 298 ++++++++++++++++++
1 file changed, 298 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,kaanapali-mdss.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,kaanapali-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,kaanapali-mdss.yaml
new file mode 100644
index 000000000000..3006c0a69309
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,kaanapali-mdss.yaml
@@ -0,0 +1,298 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,kaanapali-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Kaanapali Display MDSS
+
+maintainers:
+ - Yongxing Mou <yongxing.mou@....qualcomm.com>
+
+description:
+ Kaanapali MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,kaanapali-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+ - description: Display AHB SWI
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,kaanapali-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ const: qcom,kaanapali-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,kaanapali-dsi-phy-3nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,kaanapali-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy-qcom-qmp.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@...0000 {
+ compatible = "qcom,kaanapali-mdss";
+ reg = <0x09800000 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&disp_cc_mdss_mdp_clk>,
+ <&disp_cc_mdss_ahb1_clk>;
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
+
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+ iommus = <&apps_smmu 0x800 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@...1000 {
+ compatible = "qcom,kaanapali-dpu";
+ reg = <0x09801000 0x1C8000>,
+ <0x09B16000 0x3000>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc_disp_hf_axi_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&disp_cc_mdss_mdp_lut_clk>,
+ <&disp_cc_mdss_mdp_clk>,
+ <&disp_cc_mdss_vsync_clk>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&disp_cc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-207000000 {
+ opp-hz = /bits/ 64 <207000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-337000000 {
+ opp-hz = /bits/ 64 <337000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-417000000 {
+ opp-hz = /bits/ 64 <417000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-532000000 {
+ opp-hz = /bits/ 64 <532000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&rpmhpd_opp_nom_l1>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+ };
+ };
+
+ dsi@...4000 {
+ compatible = "qcom,kaanapali-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x09ac0000 0x500>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 4>;
+
+ clocks = <&disp_cc_mdss_byte0_clk>,
+ <&disp_cc_mdss_byte0_intf_clk>,
+ <&disp_cc_mdss_pclk0_clk>,
+ <&disp_cc_mdss_esc0_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&disp_cc_esync0_clk>,
+ <&disp_cc_osc_clk>,
+ <&disp_cc_mdss_byte0_clk_src>,
+ <&disp_cc_mdss_pclk0_clk_src>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus",
+ "dsi_pll_pixel",
+ "dsi_pll_byte",
+ "esync",
+ "osc",
+ "byte_src",
+ "pixel_src";
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ vdda-supply = <&vreg_l3g_1p2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@...5000 {
+ compatible = "qcom,kaanapali-dsi-phy-3nm", "qcom,sm8750-dsi-phy-3nm";
+ reg = <0x09ac1000 0x200>,
+ <0x09ac1200 0x280>,
+ <0x09ac1500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ vdds-supply = <&vreg_l3i_0p88>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+ };
--
2.34.1
Powered by blists - more mailing lists