Message-ID: <20251024191550.194946-1-elder@riscstar.com>
Date: Fri, 24 Oct 2025 14:15:40 -0500
From: Alex Elder <elder@...cstar.com>
To: robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	han.xu@....com,
	broonie@...nel.org,
	dlan@...too.org,
	pjw@...nel.org
Cc: Frank.li@....com,
	p.zabel@...gutronix.de,
	guodong@...cstar.com,
	palmer@...belt.com,
	aou@...s.berkeley.edu,
	alex@...ti.fr,
	apatel@...tanamicro.com,
	joel@....id.au,
	geert+renesas@...der.be,
	cyy@...self.name,
	heylenay@....org,
	conor.dooley@...rochip.com,
	fustini@...nel.org,
	linux-spi@...r.kernel.org,
	devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	spacemit@...ts.linux.dev,
	linux-riscv@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v3 0/9] spi: enable the SpacemiT K1 SoC QSPI

This series adds support for the SpacemiT K1 SoC QSPI.  This IP is
generally compatible with the Freescale QSPI driver, requiring three
minor changes to enable it to be supported.  The changes are:
  - Adding support for optional resets
  - Having the clock *not* be disabled when changing its rate
  - Allowing the size of storage blocks written to flash chips
    to be set to something different from the AHB buffer size

This version of the series addresses comments received in review of
version 2.

					-Alex

This series is available here:
  https://github.com/riscstar/linux/tree/outgoing/qspi-v3
  
Version 3 addresses comments recieved during review of v2:
  - This version fully tested and confirmed to work on BPI-F3
  - Added Acked-by from Conor on patches 1 and 2
  - Added Reviewed-by from Frank on patches 1 and 6
  - Moved the reset property conditional under allOf in the binding
  - In patch 5, needs_clk_disable() is no longer inline
  - Tweaked the description in patch 5
  - Renamed a local variable to be "sfa_size" in patch 6
  - Changed the subject line in patch 6
  - The sfa_size field was not being assigned in spacemit_k1_data;
    now it is set to SZ_1K

Here is version 2:
  https://lore.kernel.org/lkml/20251023175922.528868-1-elder@riscstar.com/

Version 2 addresses comments recieved during review of v1:
  - The "reset" property now only applies to spacemit,k1-qspi compatible.
  - Patch 1 (previously patch 2) now points out that this is the first
    non-Freescale device using the binding.
  - Added Frank Li's Reviewed-by on patch 3.
  - A quirk flag has been renamed to be QUADSPI_QUIRK_SKIP_CLK_DISABLE.
  - The predicate for that quirk now returns bool type.
  - All other similar predicates now return bool type; this is done in a
    new patch (patch 4).
  - If non-zero, new field fsl_qspi_devtype_data->sfa_size defines the
    size of the serial flash regions, rather than ahb_buf_size.
  - A continued line in the Kconfig is now aligned.
  - Patch descriptions are wrapped at 75 columns.

Here is version 1:
  https://lore.kernel.org/lkml/20251020165152.666221-1-elder@riscstar.com/


Alex Elder (9):
  dt-bindings: spi: fsl-qspi: support SpacemiT K1
  dt-bindings: spi: fsl-qspi: add optional resets
  spi: fsl-qspi: add optional reset support
  spi: fsl-qspi: switch predicates to bool
  spi: fsl-qspi: add a clock disable quirk
  spi: fsl-qspi: introduce sfa_size devtype data
  spi: fsl-qspi: support the SpacemiT K1 SoC
  riscv: dts: spacemit: enable K1 SoC QSPI on BPI-F3
  riscv: defconfig: enable SPI_FSL_QUADSPI as a module

 .../bindings/spi/fsl,spi-fsl-qspi.yaml        | 15 ++++
 .../boot/dts/spacemit/k1-bananapi-f3.dts      |  6 ++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi  | 21 +++++
 arch/riscv/boot/dts/spacemit/k1.dtsi          | 16 ++++
 arch/riscv/configs/defconfig                  |  1 +
 drivers/spi/Kconfig                           |  3 +-
 drivers/spi/spi-fsl-qspi.c                    | 88 +++++++++++++------
 7 files changed, 124 insertions(+), 26 deletions(-)


base-commit: 72fb0170ef1f45addf726319c52a0562b6913707
-- 
2.48.1

Powered by blists - more mailing lists