[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fbab492a-e279-4ab1-91ad-2b4000f7229a@oss.qualcomm.com>
Date: Fri, 24 Oct 2025 10:39:13 +0200
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Taniya Das <taniya.das@....qualcomm.com>,
Bjorn Andersson <andersson@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd
<sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Ajit Pandey <ajit.pandey@....qualcomm.com>,
Imran Shaik <imran.shaik@....qualcomm.com>,
Jagadeesh Kona <jagadeesh.kona@....qualcomm.com>
Subject: Re: [PATCH v3 1/4] clk: qcom: branch: Extend invert logic for branch2
mem clocks
On 10/24/25 6:24 AM, Taniya Das wrote:
> Some clock branches require inverted logic for memory gating, where
> disabling the memory involves setting a bit and enabling it involves
> clearing the same bit. This behavior differs from the standard approach
> memory branch clocks ops where enabling typically sets the bit.
>
> Introducing the mem_enable_invert to allow conditional handling of
> these sequences of the inverted control logic for memory operations
> required on those memory clock branches.
>
> Signed-off-by: Taniya Das <taniya.das@....qualcomm.com>
> ---
> drivers/clk/qcom/clk-branch.c | 10 ++++++----
> drivers/clk/qcom/clk-branch.h | 4 ++++
> 2 files changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
> index 0f10090d4ae681babbdbbb1b6c68ffe77af7a784..4094ffc53d0c91dfa9e4263134c3a996100ad078 100644
> --- a/drivers/clk/qcom/clk-branch.c
> +++ b/drivers/clk/qcom/clk-branch.c
> @@ -141,9 +141,10 @@ static int clk_branch2_mem_enable(struct clk_hw *hw)
> struct clk_branch branch = mem_br->branch;
> u32 val;
> int ret;
> + bool en_val = (mem_br->mem_enable_invert ? false : true);
" = !mem_br->mem_enable_invert"
>
> - regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> - mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
> + regmap_assign_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> + mem_br->mem_enable_mask, en_val);
>
> ret = regmap_read_poll_timeout(branch.clkr.regmap, mem_br->mem_ack_reg,
> val, val & mem_br->mem_enable_ack_mask, 0, 200);
> @@ -158,9 +159,10 @@ static int clk_branch2_mem_enable(struct clk_hw *hw)
> static void clk_branch2_mem_disable(struct clk_hw *hw)
> {
> struct clk_mem_branch *mem_br = to_clk_mem_branch(hw);
> + bool en_val = (mem_br->mem_enable_invert ? true : false);
This value is a boolean already, you can inline it below
Konrad
Powered by blists - more mailing lists