| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <79081b06-4e34-458a-8e00-fe3a0e4e26b6@bootlin.com>
Date: Fri, 24 Oct 2025 14:21:31 +0200
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: Steffen Trumtrar <s.trumtrar@...gutronix.de>,
Andrew Lunn <andrew+netdev@...n.ch>, "David S. Miller"
<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Dinh Nguyen <dinguyen@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Matthew Gerlach <matthew.gerlach@...era.com>
Cc: kernel@...gutronix.de, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, Teoh Ji Sheng <ji.sheng.teoh@...el.com>
Subject: Re: [PATCH v5 02/10] net: stmmac: Use interrupt mode INTM=1 for per
channel irq
Hi Steffen,
On 24/10/2025 13:49, Steffen Trumtrar wrote:
> From: Teoh Ji Sheng <ji.sheng.teoh@...el.com>
>
> commit 6ccf12ae111e ("net: stmmac: use interrupt mode INTM=1
> for multi-MSI") is introduced for platform that uses MSI.
>
> Similar approach is taken to enable per channel interrupt
> that uses shared peripheral interrupt (SPI), so only per channel
> TX and RX intr (TI/RI) are handled by TX/RX ISR without calling
> common interrupt ISR.
>
> TX/RX NORMAL interrupts check is now decoupled, since NIS bit
> is not asserted for any TI/RI events when INTM=1.
>
> Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@...el.com>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@...gutronix.de>
> ---
> drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 3 +++
> drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 10 +++++++++-
> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 20 ++++++++++++++++++++
> include/linux/stmmac.h | 2 ++
> 4 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> index 0d408ee17f337..64b533207e4a6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> @@ -326,6 +326,9 @@
> /* DMA Registers */
> #define XGMAC_DMA_MODE 0x00003000
> #define XGMAC_SWR BIT(0)
> +#define DMA_MODE_INTM_MASK GENMASK(13, 12)
> +#define DMA_MODE_INTM_SHIFT 12
> +#define DMA_MODE_INTM_MODE1 0x1
> #define XGMAC_DMA_SYSBUS_MODE 0x00003004
> #define XGMAC_WR_OSR_LMT GENMASK(29, 24)
> #define XGMAC_WR_OSR_LMT_SHIFT 24
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> index 4d6bb995d8d84..1e9ee1f10f0ef 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> @@ -31,6 +31,13 @@ static void dwxgmac2_dma_init(void __iomem *ioaddr,
> value |= XGMAC_EAME;
>
> writel(value, ioaddr + XGMAC_DMA_SYSBUS_MODE);
> +
> + if (dma_cfg->multi_irq_en) {
> + value = readl(ioaddr + XGMAC_DMA_MODE);
> + value &= ~DMA_MODE_INTM_MASK;
> + value |= (DMA_MODE_INTM_MODE1 << DMA_MODE_INTM_SHIFT);
> + writel(value, ioaddr + XGMAC_DMA_MODE);
> + }
> }
>
> static void dwxgmac2_dma_init_chan(struct stmmac_priv *priv,
> @@ -359,13 +366,14 @@ static int dwxgmac2_dma_interrupt(struct stmmac_priv *priv,
> }
> }
>
> - /* TX/RX NORMAL interrupts */
> + /* RX NORMAL interrupts */
> if (likely(intr_status & XGMAC_RI)) {
> u64_stats_update_begin(&stats->syncp);
> u64_stats_inc(&stats->rx_normal_irq_n[chan]);
> u64_stats_update_end(&stats->syncp);
> ret |= handle_rx;
> }
> + /* TX NORMAL interrupts */
> if (likely(intr_status & (XGMAC_TI | XGMAC_TBU))) {
> u64_stats_update_begin(&stats->syncp);
> u64_stats_inc(&stats->tx_normal_irq_n[chan]);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 27bcaae07a7f2..cfa82b8e04b94 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -607,6 +607,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
> dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
> dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
>
> + dma_cfg->multi_irq_en = of_property_read_bool(np, "snps,multi-irq-en");
You need to document this property in the binding
> +
> plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
> if (plat->force_thresh_dma_mode && plat->force_sf_dma_mode) {
> plat->force_sf_dma_mode = 0;
> @@ -737,6 +739,8 @@ EXPORT_SYMBOL_GPL(stmmac_pltfr_find_clk);
> int stmmac_get_platform_resources(struct platform_device *pdev,
> struct stmmac_resources *stmmac_res)
> {
> + char irq_name[11];
> + int i;
> memset(stmmac_res, 0, sizeof(*stmmac_res));
>
> /* Get IRQ information early to have an ability to ask for deferred
> @@ -746,6 +750,22 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
> if (stmmac_res->irq < 0)
> return stmmac_res->irq;
>
> + /* For RX Channel */
> + for (i = 0; i < MTL_MAX_RX_QUEUES; i++) {
> + sprintf(irq_name, "%s%d", "macirq_rx", i);
> + stmmac_res->rx_irq[i] = platform_get_irq_byname(pdev, irq_name);
> + if (stmmac_res->rx_irq[i] < 0)
> + break;
> + }
> +
> + /* For TX Channel */
> + for (i = 0; i < MTL_MAX_TX_QUEUES; i++) {
> + sprintf(irq_name, "%s%d", "macirq_tx", i);
> + stmmac_res->tx_irq[i] = platform_get_irq_byname(pdev, irq_name);
> + if (stmmac_res->tx_irq[i] < 0)
> + break;
> + }
Same for these irq names
> +
> /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
> * The external wake up irq can be passed through the platform code
> * named as "eth_wake_irq"
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index fa1318bac06c4..a8b15b4e3c370 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -102,6 +102,7 @@ struct stmmac_dma_cfg {
> bool aal;
> bool eame;
> bool multi_msi_en;
> + bool multi_irq_en;
> bool dche;
> bool atds;
> };
> @@ -290,6 +291,7 @@ struct plat_stmmacenet_data {
> u8 vlan_fail_q;
> struct pci_dev *pdev;
> int int_snapshot_num;
> + bool multi_irq_en;
This seems to be unused ?
> int msi_mac_vec;
> int msi_wol_vec;
> int msi_lpi_vec;
>
Thanks,
Maxime
Powered by blists - more mailing lists