Message-Id: <20251027-imx8mp-hb-iiot-v1-10-683f86357818@solid-run.com>
Date: Mon, 27 Oct 2025 18:48:19 +0100
From: Josua Mayer <josua@...id-run.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
 Neil Armstrong <neil.armstrong@...aro.org>,
 Jessica Zhang <jessica.zhang@....qualcomm.com>,
 David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
 Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
 Dmitry Torokhov <dmitry.torokhov@...il.com>,
 Sascha Hauer <s.hauer@...gutronix.de>,
 Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>
Cc: Jon Nettleton <jon@...id-run.com>,
 Mikhail Anikin <mikhail.anikin@...id-run.com>,
 Yazan Shhady <yazan.shhady@...id-run.com>, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
 linux-input@...r.kernel.org, imx@...ts.linux.dev,
 linux-arm-kernel@...ts.infradead.org, Josua Mayer <josua@...id-run.com>
Subject: [PATCH 10/10] arm64: dts: add description for solidrun i.mx8mm som
 and evb

Add description for the SolidRun i.MX8M Mini SoM on HummingBoard Ripple.

The SoM features:
- 1Gbps Ethernet with PHY
- eMMC
- 1/2GB DDR
- NPU (assembly option)
- WiFi + Bluetooth

The HummingBoard Ripple features:
- 2x USB-2.0 Type-A connector
- 1Gbps RJ45 Ethernet with PoE
- microSD connector
- microHDMI connector
- mpcie connector with USB-2.0 interface + SIM card holder
- microUSB connector for console (using fdtdi chip)
- RTC with backup battery

Signed-off-by: Josua Mayer <josua@...id-run.com>
---
 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 .../dts/freescale/imx8mm-hummingboard-ripple.dts   | 335 +++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mm-sr-som.dtsi   | 395 +++++++++++++++++++++
 3 files changed, 732 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index c56137097da3b..3fbc8a1a1bf6e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -124,6 +124,8 @@ imx8mm-evk-pcie-ep-dtbs += imx8mm-evk.dtb imx-pcie0-ep.dtbo
 imx8mm-evkb-pcie-ep-dtbs += imx8mm-evkb.dtb imx-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk-pcie-ep.dtb imx8mm-evkb-pcie-ep.dtb
 
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-hummingboard-ripple.dtb
+DTC_FLAGS_imx8mm-hummingboard-ripple += -@
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-hummingboard-ripple.dts b/arch/arm64/boot/dts/freescale/imx8mm-hummingboard-ripple.dts
new file mode 100644
index 0000000000000..110e7ff1ff135
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-hummingboard-ripple.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@...id-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mm-sr-som.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MM HummingBoard Ripple";
+	compatible = "solidrun,imx8mm-hummingboard-ripple",
+		     "solidrun,imx8mm-sr-som", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			label = "D30";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "D31";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "D32";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-3 {
+			label = "D33";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-4 {
+			label = "D34";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	rfkill-mpcie-wifi {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_rfkill_pins>;
+		label = "mpcie WiFi";
+		radio-type = "wlan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <250>;
+	};
+
+	vbus1: regulator-vbus-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus1";
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus1_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vbus2: regulator-vbus-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus2";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus2_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	v_1_2: regulator-1-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	carrier_rtc: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+	};
+
+	carrier_eeprom: eeprom@57{
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&v_1_8>;
+		dvdd-supply = <&v_1_8>;
+		pvdd-supply = <&v_1_8>;
+		a2vdd-supply = <&v_1_8>;
+		v3p3-supply = <&v_3_3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_pins>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		pd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_from_dsim: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x0
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x0
+		>;
+	};
+
+	i2c3_pins: pinctrl-i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x0
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x0
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x0
+			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x0
+			MX8MM_IOMUXC_ECSPI1_SCLK_GPIO5_IO6	0x0
+		>;
+	};
+
+	pcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20		0x0
+		>;
+	};
+
+	usb_hub_pins: pinctrl-usb-hub-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x140
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x0
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x140
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x0
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x140
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x0
+		>;
+	};
+
+	vbus1_pins: pinctrl-vbus-1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x20
+		>;
+	};
+
+	vbus2_pins: pinctrl-vbus-2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x20
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&adv7535_from_dsim>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&vbus2>;
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+	dr_mode = "host";
+	vbus-supply = <&vbus1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_hub_pins>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+
+	/* this device is not visible because host supports 2.0 only */
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-sr-som.dtsi
new file mode 100644
index 0000000000000..ce4a61408bfa6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-sr-som.dtsi
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@...id-run.com>
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MM SoM";
+	compatible = "solidrun,imx8mm-sr-som", "fsl,imx8mm";
+
+	chosen {
+		bootargs = "earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	memory@...00000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	v_3_3: regulator-3-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fec1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x4>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; // MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22
+			phy-reset-duration = <10>;
+			qca,smarteee-tw-us-1g = <24>;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	som_eeprom: eeprom@50{
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pmic_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	fec1_pins: pinctrl-fec1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+		>;
+	};
+
+	i2c1_pins: pinctrl-i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pcie_pins: pinctrl-pcie-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x0
+		>;
+	};
+
+	pmic_pins: pinctrl-pmic-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x140
+		>;
+	};
+
+	uart1_pins: pinctrl-uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+			/* BT_REG_ON */
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x0
+			/* BT_WAKE_DEV */
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x0
+			/* BT_WAKE_HOST */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x100
+		>;
+	};
+
+	uart2_pins: pinctrl-uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	usdhc1_pins: pinctrl-usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			/* wifi refclk */
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x0
+			/* WL_REG_ON */
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x0
+			/* WL_WAKE_HOST */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x100
+		>;
+	};
+
+	usdhc3_pins: pinctrl-usdhc3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	wdog1_pins: pinctrl-wdog1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x140
+		>;
+	};
+};
+
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+/* assembly-option for AI accelerator on SoM, otherwise routed to carrier */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	reset-gpios = <&gpio1 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	/* select 80MHz parent clock to support maximum baudrate 4Mbps */
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usdhc1_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc3_pins>;
+	pinctrl-1 = <&usdhc3_100mhz_pins>;
+	pinctrl-2 = <&usdhc3_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wdog1_pins>;
+	status = "okay";
+};

-- 
2.51.0

Powered by blists - more mailing lists