[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACRpkdbfjqbmy5EbLApee3p9TEsEzBKOcGMrbspeWxqUc_niiw@mail.gmail.com>
Date: Mon, 27 Oct 2025 23:34:05 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Matti Vaittinen <mazziesaccount@...il.com>
Cc: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>, Lee Jones <lee@...nel.org>,
Pavel Machek <pavel@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Sebastian Reichel <sre@...nel.org>, Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Andreas Kemnade <andreas@...nade.info>,
Alexandre Belloni <alexandre.belloni@...tlin.com>, linux-leds@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-rtc@...r.kernel.org
Subject: Re: [PATCH v2 03/15] dt-bindings: power: supply: BD72720 managed battery
On Mon, Oct 27, 2025 at 12:45 PM Matti Vaittinen
<mazziesaccount@...il.com> wrote:
> The BD72720 PMIC has a battery charger + coulomb counter block. These
> can be used to manage charging of a lithium-ion battery and to do fuel
> gauging.
>
> ROHM has developed a so called "zero-correction" -algorithm to improve
> the fuel-gauging accuracy close to the point where battery is depleted.
> This relies on battery specific "VDR" tables, which are measured from
> the battery, and which describe the voltage drop rate. More thorough
> explanation about the "zero correction" and "VDR" parameters is here:
> https://lore.kernel.org/all/676253b9-ff69-7891-1f26-a8b5bb5a421b@fi.rohmeurope.com/
>
> Document the VDR zero-correction specific battery properties used by the
> BD72720 and some other ROHM chargers.
>
> Signed-off-by: Matti Vaittinen <mazziesaccount@...il.com>
>From my PoV this looks good, and makes it easy for engineers
to read the DTS file and understand what is going on, so after
addressing Rob's final comments you can add:
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Yours,
Linus Walleij
Powered by blists - more mailing lists