[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251030-phy-qcom-edp-add-missing-refclk-v5-0-fce8c76f855a@linaro.org>
Date: Thu, 30 Oct 2025 16:28:28 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Vinod Koul <vkoul@...nel.org>, 
 Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>, 
 Dmitry Baryshkov <lumag@...nel.org>, Konrad Dybcio <konradybcio@...nel.org>, 
 Sibi Sankar <sibi.sankar@....qualcomm.com>, 
 Rajendra Nayak <quic_rjendra@...cinc.com>
Cc: Neil Armstrong <neil.armstrong@...aro.org>, 
 linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Krzysztof Kozlowski <krzk@...nel.org>, Abel Vesa <abel.vesa@...aro.org>, 
 Krzysztof Kozlowski <krzk@...nel.org>, stable@...r.kernel.org, 
 Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Subject: [PATCH v5 0/3] phy: qcom: edp: Add missing ref clock to x1e80100
According to documentation, the DP PHY on x1e80100 has another clock
called ref.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, when it comes to power management, this clock
needs to be also disabled on suspend. So even though this change breaks
the ABI, it is needed in order to make we disable this clock on runtime
PM, when that is going to be enabled in the driver.
So rework the driver to allow different number of clocks, fix the
dt-bindings schema and add the clock to the DT node as well.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
Changes in v5:
- Picked-up Bjorn's R-b tags.
- Replaced "parse" with "get" on clocks acquiring failure.
- Link to v4: https://lore.kernel.org/r/20251029-phy-qcom-edp-add-missing-refclk-v4-0-adb7f5c54fe4@linaro.org
Changes in v4:
- Picked Dmitry's R-b tag for the driver patch
- Added x1e80100 substring to subject of dts patch
- Link to v3 (resend): https://lore.kernel.org/r/20251014-phy-qcom-edp-add-missing-refclk-v3-0-078be041d06f@linaro.org
Changes in v3 (resend)
- picked-up Krzysztof's R-b tag for bindings patch
- Link to v3: https://lore.kernel.org/r/20250909-phy-qcom-edp-add-missing-refclk-v3-0-4ec55a0512ab@linaro.org
Changes in v3:
- Use dev_err_probe() on clocks parsing failure.
- Explain why the ABI break is necessary.
- Drop the extra 'clk' suffix from the clock name. So ref instead of
  refclk.
- Link to v2: https://lore.kernel.org/r/20250903-phy-qcom-edp-add-missing-refclk-v2-0-d88c1b0cdc1b@linaro.org
Changes in v2:
- Fix schema by adding the minItems, as suggested by Krzysztof.
- Use devm_clk_bulk_get_all, as suggested by Konrad.
- Rephrase the commit messages to reflect the flexible number of clocks.
- Link to v1: https://lore.kernel.org/r/20250730-phy-qcom-edp-add-missing-refclk-v1-0-6f78afeadbcf@linaro.org
---
Abel Vesa (3):
      dt-bindings: phy: qcom-edp: Add missing clock for X Elite
      phy: qcom: edp: Make the number of clocks flexible
      arm64: dts: qcom: x1e80100: Add missing TCSR ref clock to the DP PHYs
 .../devicetree/bindings/phy/qcom,edp-phy.yaml      | 28 +++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/hamoa.dtsi                | 12 ++++++----
 drivers/phy/qualcomm/phy-qcom-edp.c                | 16 ++++++-------
 3 files changed, 43 insertions(+), 13 deletions(-)
---
base-commit: 131f3d9446a6075192cdd91f197989d98302faa6
change-id: 20250730-phy-qcom-edp-add-missing-refclk-5ab82828f8e7
Best regards,
-- 
Abel Vesa <abel.vesa@...aro.org>
Powered by blists - more mailing lists
 
