[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<CAGwozwF_zKe-CrB5j=4zP4ADw=jPgDM5CgKRnsXg=e5g=gf-Fw@mail.gmail.com>
Date: Fri, 31 Oct 2025 17:39:56 +0100
From: Antheas Kapenekakis <lkml@...heas.dev>
To: platform-driver-x86@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
Hans de Goede <hansg@...nel.org>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Derek John Clark <derekjohn.clark@...il.com>,
Joaquín Ignacio Aramendía <samsagax@...il.com>,
Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>
Subject: Re: [PATCH v3 0/6] platform/x86: ayaneo-ec: Add Ayaneo Embedded
Controller platform driver
On Fri, 31 Oct 2025 at 17:38, Antheas Kapenekakis <lkml@...heas.dev> wrote:
>
> On Fri, 31 Oct 2025 at 17:36, Antheas Kapenekakis <lkml@...heas.dev> wrote:
> >
> > This series introduces a platform driver for Ayaneo devices, ayaneo-ec.
> > This driver provides hwmon support, power management, and module management
> > (for the new Ayaneo 3 device). Module management is done through the new
> > firmware attributes sysfs interface.
>
> I resent this as V3 didnt I. Mmmm
No, it's correct. I redid the fixes and got confused by the changelog.
>
> >
> > Luckily, all Ayaneo devices with an ACPI mapped EC use the same registers.
> > Older devices also use a memory mapped region for RGB[1], but that is
> > replaced by HID in the new Ayaneo 3. Therefore, this allows for a simple
> > driver design that provides robust future support. The memory mapped region
> > can be upstreamed as a different RGB driver in the future or remain
> > out-of-tree[1].
> >
> > This change also allows cleaning up the oxpec driver, by removing Ayaneo
> > devices from it. In parallel, charge limiting is added for these devices.
> >
> > [1] https://github.com/ShadowBlip/ayaneo-platform
> >
> > ---
> >
> > V3: https://lore.kernel.org/all/20251015084414.1391595-1-lkml@antheas.dev/
Ignore V3 here
> > V2: https://lore.kernel.org/all/20251015084414.1391595-1-lkml@antheas.dev/
> > V1: https://lore.kernel.org/all/20250820160628.99678-1-lkml@antheas.dev/
> >
> > Changes since V3:
> > - Fix various non-functional nits
> > - On hibernation restore, use restore instead of thaw, switch to bools,
> > and restore fan pwm mode, but only after the first pwm write after
> > hibernation. Also, release pwm when entering hibernation.
> >
> > Changes since V2:
> > - Remove i counter from suspend hook by hardcoding the index
> > (we already allocate the maximum size for the cache anyway)
> > - Rename quirks to end in quirks
> > - Add missing includes to controller sysfs patch, use switch statement
Ignore the V2 changelog, treat v3 as v2
> >
> > Changes since V1:
> > - Use plain sysfs attrs for magic module attributes
> > - Combine quirk for power and modules, so attribute tree is simpler
> > - Use switch statement in hwmon
> > - Add hibernation hook for charge bypass in last patch
> > - Restoring fan speed is a liability so it is omitted, see patch notes
> > Note that for EC managed fan curves, it would be acceptable
> > - Regmap comment: Using regmap is unprecedented for ACPI mapped ECs
> > and overkill for one value (> 100 LOC)
> > - fixp_linear_interpolate() comment: it requires importing an extra header,
> > is not used for static parameters in other modules, and expands to the
> > same equation for parameters used, so it is omitted
> >
> > Antheas Kapenekakis (6):
> > platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform
> > driver
> > platform/x86: ayaneo-ec: Add hwmon support
> > platform/x86: ayaneo-ec: Add charge control support
> > platform/x86: ayaneo-ec: Add controller power and modules attributes
> > platform/x86: ayaneo-ec: Move Ayaneo devices from oxpec to ayaneo-ec
> > platform/x86: ayaneo-ec: Add suspend hook
> >
> > .../ABI/testing/sysfs-platform-ayaneo-ec | 19 +
> > MAINTAINERS | 7 +
> > drivers/platform/x86/Kconfig | 16 +-
> > drivers/platform/x86/Makefile | 3 +
> > drivers/platform/x86/ayaneo-ec.c | 582 ++++++++++++++++++
> > drivers/platform/x86/oxpec.c | 115 +---
> > 6 files changed, 625 insertions(+), 117 deletions(-)
> > create mode 100644 Documentation/ABI/testing/sysfs-platform-ayaneo-ec
> > create mode 100644 drivers/platform/x86/ayaneo-ec.c
> >
> >
> > base-commit: 211ddde0823f1442e4ad052a2f30f050145ccada
> > --
> > 2.51.1
> >
> >
Powered by blists - more mailing lists