linux-kernel - [PATCH 03/13] platform/raspberrypi: vchiq-mmal: Support sending data to MMAL ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251031-b4-vc-sm-cma-v1-3-0dd5c0ec3f5c@ideasonboard.com>
Date: Fri, 31 Oct 2025 22:57:23 +0530
From: Jai Luthra <jai.luthra@...asonboard.com>
To: Florian Fainelli <florian.fainelli@...adcom.com>, 
 Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>, 
 bcm-kernel-feedback-list@...adcom.com
Cc: Dave Stevenson <dave.stevenson@...pberrypi.com>, 
 Phil Elwell <phil@...pberrypi.com>, Stefan Wahren <wahrenst@....net>, 
 Laurent Pinchart <laurent.pinchart@...asonboard.com>, 
 Kieran Bingham <kieran.bingham@...asonboard.com>, 
 Sumit Semwal <sumit.semwal@...aro.org>, 
 Christian König <christian.koenig@....com>, 
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, 
 Jai Luthra <jai.luthra@...asonboard.com>, 
 Dave Stevenson <dave.stevenson@...pberrypi.org>
Subject: [PATCH 03/13] platform/raspberrypi: vchiq-mmal: Support sending
 data to MMAL ports

From: Dave Stevenson <dave.stevenson@...pberrypi.org>

Add the ability to send data to ports. This only supports
zero copy mode as the required bulk transfer setup calls
are not done.

Signed-off-by: Dave Stevenson <dave.stevenson@...pberrypi.org>
Signed-off-by: Jai Luthra <jai.luthra@...asonboard.com>
---
 drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c b/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c
index a115a391908da06e101e159905a4403b91e051c6..1ad00bb0a02b482719a75749ed6ca50f43df24b2 100644
--- a/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c
+++ b/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c
@@ -421,11 +421,19 @@ buffer_from_host(struct vchiq_mmal_instance *instance,
 	m.u.buffer_from_host.buffer_header.data =
 		(u32)(unsigned long)buf->buffer;
 	m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size;
-	m.u.buffer_from_host.buffer_header.length = 0;	/* nothing used yet */
-	m.u.buffer_from_host.buffer_header.offset = 0;	/* no offset */
-	m.u.buffer_from_host.buffer_header.flags = 0;	/* no flags */
-	m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN;
-	m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN;
+	if (port->type == MMAL_PORT_TYPE_OUTPUT) {
+		m.u.buffer_from_host.buffer_header.length = 0;
+		m.u.buffer_from_host.buffer_header.offset = 0;
+		m.u.buffer_from_host.buffer_header.flags = 0;
+		m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN;
+		m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN;
+	} else {
+		m.u.buffer_from_host.buffer_header.length = buf->length;
+		m.u.buffer_from_host.buffer_header.offset = 0;
+		m.u.buffer_from_host.buffer_header.flags = buf->mmal_flags;
+		m.u.buffer_from_host.buffer_header.pts = buf->pts;
+		m.u.buffer_from_host.buffer_header.dts = buf->dts;
+	}
 
 	/* clear buffer type specific data */
 	memset(&m.u.buffer_from_host.buffer_header_type_specific, 0,

-- 
2.51.0