| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251030-add-support-for-camss-on-kaanapali-v5-0-f8e12bea3d02@oss.qualcomm.com>
Date: Thu, 30 Oct 2025 19:59:47 -0700
From: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
To: Loic Poulain <loic.poulain@....qualcomm.com>,
Robert Foss <rfoss@...nel.org>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Todor Tomov <todor.too@...il.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Cc: linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, aiqun.yu@....qualcomm.com,
tingwei.zhang@....qualcomm.com, trilok.soni@....qualcomm.com,
yijie.yang@....qualcomm.com,
Jingyi Wang <jingyi.wang@....qualcomm.com>,
Atiya Kailany <atiya.kailany@....qualcomm.com>,
Hangxiang Ma <hangxiang.ma@....qualcomm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v5 0/6] media: qcom: camss: Add Kaanapali support
Add support for the RDI only CAMSS camera driver on Kaanapali. Enabling
RDI path involves adding the support for a set of CSIPHY, CSID and TFE
modules, with each TFE having multiple RDI ports. This hardware
architecture requires 'qdss_debug_xo' clock for CAMNOC to be functional.
Kaanapali camera sub system provides
- 3 x VFE, 5 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE Lite
- 3 x CSID
- 2 x CSID Lite
- 6 x CSI PHY
This series has been tested using the following commands with a
downstream driver for S5KJN5 sensor.
- media-ctl --reset
- media-ctl -V '"msm_csiphy2":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_csid0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta --capture=20 -I -n 5 -f SGBRG10P -s 4096x3072 -F /dev/video0
Dependencies:
- https://lore.kernel.org/all/20251014-use-marco-to-denote-image-buffer-number-v1-1-f782e4cc622d@oss.qualcomm.com/
- https://lore.kernel.org/all/20251014-add-new-clock-in-vfe-matching-list-v1-1-0d965ccc8a3a@oss.qualcomm.com/
- https://lore.kernel.org/all/20251023-make-csiphy-status-macro-cross-platform-v1-1-5746446dfdc6@oss.qualcomm.com/
Signed-off-by: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
---
Changes in v5:
- Refine v4 change log - Krzysztof
- Fix typo by removing redundant numerical version in kaanapali camss binding
comment description - Krzysztof
- Add missing tags that should be posted with v4 revision - Krzysztof/Andi
- Link to v4: https://lore.kernel.org/r/20251028-add-support-for-camss-on-kaanapali-v4-0-7eb484c89585@oss.qualcomm.com
Changes in v4:
- Add detailed hardware descriptions and revise message title to follow the
standard comment format for kaanapali camss binding file - Krzysztof
- Format kaanapali camss binding file to keep style consistency, by reverting
power domain name from TFE to IFE and keeping clocks name order as last
generation - Krzysztof
- Separate the 1.2 and 0.9 voltage supply DT flags for each CSIPHY to allow
for arbitrary board design with common or unique supplies to each of the PHYs
in kaanapali camss binding example, based on v2 comments - bod/Vladimir
- Link to v3: https://lore.kernel.org/r/20251023-add-support-for-camss-on-kaanapali-v3-0-02abc9a107bf@oss.qualcomm.com
Changes in v3:
- Use the name 'ahb' for 'cam_top_ahb' clock in cci binding file - Vladimir
- Reduce and simplify CSIPHY supply, port properties in camss bindings - Vladimir
- Resolve the dependency issues in the camss bindings file using ephemeral
DT nodes - Vladimir/Dmitry
- Update hf mnoc name and bandwidth values for icc module - bod
- Split CSIPHY status macro changes into a separate patch series - bod
- Add clear functions for AUP/RUP update in csid and vfe for consistency - bod
- Clarify why the RUP and AUP register update process is deferred - bod
- Clarify the necessity to keep NRT clocks for vfe - Vijay
- Link to v2: https://lore.kernel.org/r/20251014-add-support-for-camss-on-kaanapali-v2-0-f5745ba2dff9@oss.qualcomm.com
Changes in v2:
- Aggregate CSI2_RX_CFG0_PHY_SEL_BASE_IDX definition into 'camss-csid.h' - bod
- Remove 'camss-csid-1080.h' and use 'camss-csid-gen3.h' header instead - bod
- Remove redundant code in 'camss-csid-1080.c' and align the namespaces - bod
- Slipt 'camnoc_rt_axi' clock in vfe matching list into a single patch - bod
- Add whole vfe write engine client mappings in comment - bod
- Remove hardcoded image buffer number but use 'CAMSS_INIT_BUF_COUNT' - bod
- Remove SoC specific logic for vfe ops->reg_update and add a new variable
to determine whether ops->reg_update is deferred or not - bod
- Add description to explain why 'qdss_debug_xo' should be retained - bod
- Add the procss node in csiphy register list comment - bod
- Rename the variable 'cmn_status_offset' to 'common_status_offset' and
align this with macro in csiphy register structure to avoid ambiguity - bod
- Aggregate Kaanapali items into the definition that introduced by
'qcom,qcm2290-cci' in cci binding file - Loic
- Format 'kaanpali-camss.yaml' binding file
- Link to v1: https://lore.kernel.org/r/20250924-knp-cam-v1-0-b72d6deea054@oss.qualcomm.com
---
Hangxiang Ma (6):
dt-bindings: i2c: qcom-cci: Document Kaanapali compatible
media: dt-bindings: Add CAMSS device for Kaanapali
media: qcom: camss: Add Kaanapali compatible camss driver
media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
media: qcom: camss: csid: Add support for CSID 1080
media: qcom: camss: vfe: Add support for VFE 1080
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
.../bindings/media/qcom,kaanapali-camss.yaml | 406 +++++++++++++++++++++
drivers/media/platform/qcom/camss/Makefile | 2 +
.../media/platform/qcom/camss/camss-csid-1080.c | 382 +++++++++++++++++++
drivers/media/platform/qcom/camss/camss-csid-680.c | 1 -
.../media/platform/qcom/camss/camss-csid-gen3.c | 1 -
drivers/media/platform/qcom/camss/camss-csid.h | 11 +-
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 124 +++++++
drivers/media/platform/qcom/camss/camss-vfe-1080.c | 197 ++++++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 10 +-
drivers/media/platform/qcom/camss/camss-vfe.h | 2 +
drivers/media/platform/qcom/camss/camss.c | 352 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
13 files changed, 1486 insertions(+), 5 deletions(-)
---
base-commit: b09b832c719df5e10f2560771fd38146f2b3fd7c
change-id: 20251008-add-support-for-camss-on-kaanapali-e5b6dbd5209e
prerequisite-change-id: 20251012-use-marco-to-denote-image-buffer-number-cbec071b8436:v1
prerequisite-patch-id: 3ac5d6703a9530eda884720c146b9444f90cf56b
prerequisite-change-id: 20251012-add-new-clock-in-vfe-matching-list-25fb1e378c49:v1
prerequisite-patch-id: aacb03b359fdf95977805f42918c0b6c39889e32
prerequisite-change-id: 20251021-make-csiphy-status-macro-cross-platform-5390dc128aee:v1
prerequisite-patch-id: 27c2ef96f0e747ec6b4bcf316d8802356e4cc3f4
Best regards,
--
Hangxiang Ma <hangxiang.ma@....qualcomm.com>
Powered by blists - more mailing lists