[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aQUQiDdlNTc2iG3u@lizhi-Precision-Tower-5810>
Date: Fri, 31 Oct 2025 15:39:52 -0400
From: Frank Li <Frank.li@....com>
To: Richard Zhu <hongxing.zhu@....com>
Cc: l.stach@...gutronix.de, lpieralisi@...nel.org, kwilczynski@...nel.org,
mani@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, bhelgaas@...gle.com, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 06/11] arm64: dts: imx8qm-mek: Add supports-clkreq
property to PCIe M.2 port
On Wed, Oct 15, 2025 at 11:04:23AM +0800, Richard Zhu wrote:
> According to PCIe r6.1, sec 5.5.1.
>
> The following rules define how the L1.1 and L1.2 substates are entered:
> Both the Upstream and Downstream Ports must monitor the logical state of
> the CLKREQ# signal.
>
> Typical implement is using open drain, which connect RC's clkreq# to
> EP's clkreq# together and pull up clkreq#.
>
> imx8qm-mek matches this requirement, so add supports-clkreq to allow
> PCIe device enter ASPM L1 Sub-State.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> ---
Reviewed-by: Frank Li <Frank.Li@....com>
shawn: I posted it as richard at imx8qm dts patches, you can pick this one
with other part together.
> arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> index 202d5c67ac40b..c1e4775c13849 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> @@ -775,6 +775,7 @@ &pciea {
> pinctrl-names = "default";
> reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
> vpcie-supply = <®_pciea>;
> + supports-clkreq;
> status = "okay";
> };
>
> --
> 2.37.1
>
Powered by blists - more mailing lists