| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cc2aa069-304a-4b38-951a-0891a4004804@gmx.de>
Date: Sun, 2 Nov 2025 19:22:49 +0100
From: Armin Wolf <W_Armin@....de>
To: Antheas Kapenekakis <lkml@...heas.dev>,
platform-driver-x86@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
Hans de Goede <hansg@...nel.org>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Derek John Clark <derekjohn.clark@...il.com>,
Joaquín Ignacio Aramendía <samsagax@...il.com>,
Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>
Subject: Re: [PATCH v3 2/6] platform/x86: ayaneo-ec: Add hwmon support
Am 31.10.25 um 17:36 schrieb Antheas Kapenekakis:
> Add hwmon single fan sensor reads and control for Ayaneo devices.
> The register and method of access is the same for all devices.
Reviewed-by: Armin-Wolf <W_Armin@....de>
> Signed-off-by: Antheas Kapenekakis <lkml@...heas.dev>
> ---
> drivers/platform/x86/Kconfig | 2 +
> drivers/platform/x86/ayaneo-ec.c | 136 +++++++++++++++++++++++++++++++
> 2 files changed, 138 insertions(+)
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index ebe7d2ab8758..b3beaff4b03a 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -318,6 +318,8 @@ config ASUS_TF103C_DOCK
>
> config AYANEO_EC
> tristate "Ayaneo EC platform control"
> + depends on ACPI_EC
> + depends on HWMON
> help
> Enables support for the platform EC of Ayaneo devices. This
> includes fan control, fan speed, charge limit, magic
> diff --git a/drivers/platform/x86/ayaneo-ec.c b/drivers/platform/x86/ayaneo-ec.c
> index 2fe66c8a89f4..108a23458a4f 100644
> --- a/drivers/platform/x86/ayaneo-ec.c
> +++ b/drivers/platform/x86/ayaneo-ec.c
> @@ -7,14 +7,24 @@
> * Copyright (C) 2025 Antheas Kapenekakis <lkml@...heas.dev>
> */
>
> +#include <linux/acpi.h>
> #include <linux/dmi.h>
> #include <linux/err.h>
> +#include <linux/hwmon.h>
> #include <linux/init.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
>
> +#define AYANEO_PWM_ENABLE_REG 0x4A
> +#define AYANEO_PWM_REG 0x4B
> +#define AYANEO_PWM_MODE_AUTO 0x00
> +#define AYANEO_PWM_MODE_MANUAL 0x01
> +
> +#define AYANEO_FAN_REG 0x76
> +
> struct ayaneo_ec_quirk {
> + bool has_fan_control;
> };
>
> struct ayaneo_ec_platform_data {
> @@ -23,6 +33,7 @@ struct ayaneo_ec_platform_data {
> };
>
> static const struct ayaneo_ec_quirk quirk_ayaneo3 = {
> + .has_fan_control = true,
> };
>
> static const struct dmi_system_id dmi_table[] = {
> @@ -36,10 +47,128 @@ static const struct dmi_system_id dmi_table[] = {
> {},
> };
>
> +/* Callbacks for hwmon interface */
> +static umode_t ayaneo_ec_hwmon_is_visible(const void *drvdata,
> + enum hwmon_sensor_types type, u32 attr,
> + int channel)
> +{
> + switch (type) {
> + case hwmon_fan:
> + return 0444;
> + case hwmon_pwm:
> + return 0644;
> + default:
> + return 0;
> + }
> +}
> +
> +static int ayaneo_ec_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + u8 tmp;
> + int ret;
> +
> + switch (type) {
> + case hwmon_fan:
> + switch (attr) {
> + case hwmon_fan_input:
> + ret = ec_read(AYANEO_FAN_REG, &tmp);
> + if (ret)
> + return ret;
> + *val = tmp << 8;
> + ret = ec_read(AYANEO_FAN_REG + 1, &tmp);
> + if (ret)
> + return ret;
> + *val += tmp;
> + return 0;
> + default:
> + break;
> + }
> + break;
> + case hwmon_pwm:
> + switch (attr) {
> + case hwmon_pwm_input:
> + ret = ec_read(AYANEO_PWM_REG, &tmp);
> + if (ret)
> + return ret;
> + if (tmp > 100)
> + return -EIO;
> + *val = (255 * tmp) / 100;
> + return 0;
> + case hwmon_pwm_enable:
> + ret = ec_read(AYANEO_PWM_ENABLE_REG, &tmp);
> + if (ret)
> + return ret;
> + if (tmp == AYANEO_PWM_MODE_MANUAL)
> + *val = 1;
> + else if (tmp == AYANEO_PWM_MODE_AUTO)
> + *val = 2;
> + else
> + return -EIO;
> + return 0;
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> + return -EOPNOTSUPP;
> +}
> +
> +static int ayaneo_ec_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + switch (type) {
> + case hwmon_pwm:
> + switch (attr) {
> + case hwmon_pwm_enable:
> + switch (val) {
> + case 1:
> + return ec_write(AYANEO_PWM_ENABLE_REG,
> + AYANEO_PWM_MODE_MANUAL);
> + case 2:
> + return ec_write(AYANEO_PWM_ENABLE_REG,
> + AYANEO_PWM_MODE_AUTO);
> + default:
> + return -EINVAL;
> + }
> + case hwmon_pwm_input:
> + if (val < 0 || val > 255)
> + return -EINVAL;
> + return ec_write(AYANEO_PWM_REG, (val * 100) / 255);
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> + return -EOPNOTSUPP;
> +}
> +
> +static const struct hwmon_ops ayaneo_ec_hwmon_ops = {
> + .is_visible = ayaneo_ec_hwmon_is_visible,
> + .read = ayaneo_ec_read,
> + .write = ayaneo_ec_write,
> +};
> +
> +static const struct hwmon_channel_info *const ayaneo_ec_sensors[] = {
> + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT),
> + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
> + NULL,
> +};
> +
> +static const struct hwmon_chip_info ayaneo_ec_chip_info = {
> + .ops = &ayaneo_ec_hwmon_ops,
> + .info = ayaneo_ec_sensors,
> +};
> +
> static int ayaneo_ec_probe(struct platform_device *pdev)
> {
> const struct dmi_system_id *dmi_entry;
> struct ayaneo_ec_platform_data *data;
> + struct device *hwdev;
>
> dmi_entry = dmi_first_match(dmi_table);
> if (!dmi_entry)
> @@ -53,6 +182,13 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
> data->quirks = dmi_entry->driver_data;
> platform_set_drvdata(pdev, data);
>
> + if (data->quirks->has_fan_control) {
> + hwdev = devm_hwmon_device_register_with_info(&pdev->dev,
> + "ayaneo_ec", NULL, &ayaneo_ec_chip_info, NULL);
> + if (IS_ERR(hwdev))
> + return PTR_ERR(hwdev);
> + }
> +
> return 0;
> }
>
Powered by blists - more mailing lists