| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<CAGwozwFRF11dH02SRRNCyiYW7dNuoYoGWfPdEWPoim2r-KoZ0g@mail.gmail.com>
Date: Sun, 2 Nov 2025 19:46:16 +0100
From: Antheas Kapenekakis <lkml@...heas.dev>
To: Armin Wolf <W_Armin@....de>
Cc: platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-hwmon@...r.kernel.org, Hans de Goede <hansg@...nel.org>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Derek John Clark <derekjohn.clark@...il.com>,
Joaquín Ignacio Aramendía <samsagax@...il.com>,
Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>
Subject: Re: [PATCH v3 4/6] platform/x86: ayaneo-ec: Add controller power and
modules attributes
On Sun, 2 Nov 2025 at 19:30, Armin Wolf <W_Armin@....de> wrote:
>
> Am 31.10.25 um 17:36 schrieb Antheas Kapenekakis:
>
> > The Ayaneo 3 features hot-swappable controller modules. The ejection
> > and management is done through HID. However, after ejecting the modules,
> > the controller needs to be power cycled via the EC to re-initialize.
> >
> > For this, the EC provides a variable that holds whether the left or
> > right modules are connected, and a power control register to turn
> > the controller on or off. After ejecting the modules, the controller
> > should be turned off. Then, after both modules are reinserted,
> > the controller may be powered on again to re-initialize.
> >
> > This patch introduces two new sysfs attributes:
> > - `controller_modules`: a read-only attribute that indicates whether
> > the left and right modules are connected (none, left, right, both).
> > - `controller_power`: a read-write attribute that allows the user
> > to turn the controller on or off (with '1'/'0').
> >
> > Therefore, after ejection is complete, userspace can power off the
> > controller, then wait until both modules have been reinserted
> > (`controller_modules` will return 'both') to turn on the controller.
> >
> > Reviewed-by: Armin Wolf <W_Armin@....de>
> > Signed-off-by: Antheas Kapenekakis <lkml@...heas.dev>
> > ---
> > .../ABI/testing/sysfs-platform-ayaneo-ec | 19 ++++
> > MAINTAINERS | 1 +
> > drivers/platform/x86/ayaneo-ec.c | 106 ++++++++++++++++++
> > 3 files changed, 126 insertions(+)
> > create mode 100644 Documentation/ABI/testing/sysfs-platform-ayaneo-ec
> >
> > diff --git a/Documentation/ABI/testing/sysfs-platform-ayaneo-ec b/Documentation/ABI/testing/sysfs-platform-ayaneo-ec
> > new file mode 100644
> > index 000000000000..3c9c3580c685
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-platform-ayaneo-ec
> > @@ -0,0 +1,19 @@
> > +What: /sys/devices/platform/ayaneo-ec/controller_power
> > +Date: Oct 2025
>
> I think you need to update those dates.
>
> > +KernelVersion: 6.19
> > +Contact: "Antheas Kapenekakis" <lkml@...heas.dev>
> > +Description:
> > + Current controller power state. Allows turning on and off
> > + the controller power (e.g. for power savings). Write 1 to
> > + turn on, 0 to turn off. File is readable and writable.
> > +
> > +What: /sys/devices/platform/ayaneo-ec/controller_modules
> > +Date: Oct 2025
> > +KernelVersion: 6.19
> > +Contact: "Antheas Kapenekakis" <lkml@...heas.dev>
> > +Description:
> > + Shows which controller modules are currently connected to
> > + the device. Possible values are "left", "right" and "both".
> > + File is read-only. The Windows software for this device
> > + will only set controller power to 1 if both module sides
> > + are connected (i.e. this file returns "both").
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index da9498d8cc89..b4d62ea9a926 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -4191,6 +4191,7 @@ AYANEO PLATFORM EC DRIVER
> > M: Antheas Kapenekakis <lkml@...heas.dev>
> > L: platform-driver-x86@...r.kernel.org
> > S: Maintained
> > +F: Documentation/ABI/testing/sysfs-platform-ayaneo
> > F: drivers/platform/x86/ayaneo-ec.c
> >
> > AZ6007 DVB DRIVER
> > diff --git a/drivers/platform/x86/ayaneo-ec.c b/drivers/platform/x86/ayaneo-ec.c
> > index 697bb053a7d6..0652c044ad76 100644
> > --- a/drivers/platform/x86/ayaneo-ec.c
> > +++ b/drivers/platform/x86/ayaneo-ec.c
> > @@ -8,6 +8,7 @@
> > */
> >
> > #include <linux/acpi.h>
> > +#include <linux/bits.h>
> > #include <linux/dmi.h>
> > #include <linux/err.h>
> > #include <linux/hwmon.h>
> > @@ -16,6 +17,7 @@
> > #include <linux/module.h>
> > #include <linux/platform_device.h>
> > #include <linux/power_supply.h>
> > +#include <linux/sysfs.h>
> > #include <acpi/battery.h>
> >
> > #define AYANEO_PWM_ENABLE_REG 0x4A
> > @@ -32,9 +34,17 @@
> > #define AYANEO_CHARGE_VAL_AUTO 0xaa
> > #define AYANEO_CHARGE_VAL_INHIBIT 0x55
> >
> > +#define AYANEO_POWER_REG 0x2d
> > +#define AYANEO_POWER_OFF 0xfe
> > +#define AYANEO_POWER_ON 0xff
> > +#define AYANEO_MODULE_REG 0x2f
> > +#define AYANEO_MODULE_LEFT BIT(0)
> > +#define AYANEO_MODULE_RIGHT BIT(1)
>
> Using GENMASK() would make sense here.
Only a single bit is being used though? GENMASK is used for a contiguous series?
> With those issues being fixed:
> Reviewed-by: Armin Wolf <W_Armin@....de>
>
> > +
> > struct ayaneo_ec_quirk {
> > bool has_fan_control;
> > bool has_charge_control;
> > + bool has_magic_modules;
> > };
> >
> > struct ayaneo_ec_platform_data {
> > @@ -46,6 +56,7 @@ struct ayaneo_ec_platform_data {
> > static const struct ayaneo_ec_quirk quirk_ayaneo3 = {
> > .has_fan_control = true,
> > .has_charge_control = true,
> > + .has_magic_modules = true,
> > };
> >
> > static const struct dmi_system_id dmi_table[] = {
> > @@ -266,6 +277,100 @@ static int ayaneo_remove_battery(struct power_supply *battery,
> > return 0;
> > }
> >
> > +static ssize_t controller_power_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf,
> > + size_t count)
> > +{
> > + bool value;
> > + int ret;
> > +
> > + ret = kstrtobool(buf, &value);
> > + if (ret)
> > + return ret;
> > +
> > + ret = ec_write(AYANEO_POWER_REG, value ? AYANEO_POWER_ON : AYANEO_POWER_OFF);
> > + if (ret)
> > + return ret;
> > +
> > + return count;
> > +}
> > +
> > +static ssize_t controller_power_show(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + int ret;
> > + u8 val;
> > +
> > + ret = ec_read(AYANEO_POWER_REG, &val);
> > + if (ret)
> > + return ret;
> > +
> > + return sysfs_emit(buf, "%d\n", val == AYANEO_POWER_ON);
> > +}
> > +
> > +static DEVICE_ATTR_RW(controller_power);
> > +
> > +static ssize_t controller_modules_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + char *out;
> > + int ret;
> > + u8 val;
> > +
> > + ret = ec_read(AYANEO_MODULE_REG, &val);
> > + if (ret)
> > + return ret;
> > +
> > + switch (~val & (AYANEO_MODULE_LEFT | AYANEO_MODULE_RIGHT)) {
> > + case AYANEO_MODULE_LEFT | AYANEO_MODULE_RIGHT:
> > + out = "both";
> > + break;
> > + case AYANEO_MODULE_LEFT:
> > + out = "left";
> > + break;
> > + case AYANEO_MODULE_RIGHT:
> > + out = "right";
> > + break;
> > + default:
> > + out = "none";
> > + break;
> > + }
> > +
> > + return sysfs_emit(buf, "%s\n", out);
> > +}
> > +
> > +static DEVICE_ATTR_RO(controller_modules);
> > +
> > +static struct attribute *aya_mm_attrs[] = {
> > + &dev_attr_controller_power.attr,
> > + &dev_attr_controller_modules.attr,
> > + NULL
> > +};
> > +
> > +static umode_t aya_mm_is_visible(struct kobject *kobj,
> > + struct attribute *attr, int n)
> > +{
> > + struct device *dev = kobj_to_dev(kobj);
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> > +
> > + if (data->quirks->has_magic_modules)
> > + return attr->mode;
> > + return 0;
> > +}
> > +
> > +static const struct attribute_group aya_mm_attribute_group = {
> > + .is_visible = aya_mm_is_visible,
> > + .attrs = aya_mm_attrs,
> > +};
> > +
> > +static const struct attribute_group *ayaneo_ec_groups[] = {
> > + &aya_mm_attribute_group,
> > + NULL
> > +};
> > +
> > static int ayaneo_ec_probe(struct platform_device *pdev)
> > {
> > const struct dmi_system_id *dmi_entry;
> > @@ -307,6 +412,7 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
> > static struct platform_driver ayaneo_platform_driver = {
> > .driver = {
> > .name = "ayaneo-ec",
> > + .dev_groups = ayaneo_ec_groups,
> > },
> > .probe = ayaneo_ec_probe,
> > };
>
Powered by blists - more mailing lists