[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251102221643.9966-1-rodrigo.gobbi.7@gmail.com>
Date: Sun,  2 Nov 2025 19:10:25 -0300
From: Rodrigo Gobbi <rodrigo.gobbi.7@...il.com>
To: robh@...nel.org,
	krzk+dt@...nel.org,
	jic23@...nel.org,
	dlechner@...libre.com,
	nuno.sa@...log.com,
	andy@...nel.org,
	conor+dt@...nel.org,
	mranostay@...il.com,
	wbg@...nel.org
Cc: ~lkcamp/patches@...ts.sr.ht,
	linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org
Subject: [PATCH v3 0/2] iio: proximity: update Lidar-lite v2 and create v3
This series moves the Lidar v2 binding from trivial to a dedicated place.
It also adds the v3, which was not described yet, in the same place since
it's the same hardware and it is already supported by the driver.
---
Hi, all,
Very few changes in this v3. At the v2 link, there was a discussion about
the PWM output pin and the current support of that. It was suggested to
not add that pin here, at least for now.
Tks and regards.
Changelog:
v3: split things in a patchset
    replace power-gpios to powerdown-gpios
    user proper lidar node name
v2: https://lore.kernel.org/all/20250801224112.135918-1-rodrigo.gobbi.7@gmail.com/
v1: https://lore.kernel.org/all/20250701223341.36835-1-rodrigo.gobbi.7@gmail.com/#t
---
Rodrigo Gobbi (2):
  dt-bindings: iio: proximity: Remove Lidar-lite-v2 from trivial
  dt-bindings: iio: proximity: Add Lidar-lite-v2 and v3
 .../proximity/pulsedlight,lidar-lite-v2.yaml  | 54 +++++++++++++++++++
 .../devicetree/bindings/trivial-devices.yaml  |  2 -
 2 files changed, 54 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/pulsedlight,lidar-lite-v2.yaml
-- 
2.48.1
Powered by blists - more mailing lists