| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251103152826.1608309-1-mwalle@kernel.org>
Date: Mon, 3 Nov 2025 16:28:18 +0100
From: Michael Walle <mwalle@...nel.org>
To: Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Michael Walle <mwalle@...nel.org>,
Udit Kumar <u-kumar1@...com>
Subject: [PATCH] arm64: dts: ti: k3-am62p-j722s-common-main: move audio_refclk here
Since commit 9dee9cb2df08 ("arm64: dts: ti: k3-j722s-main: fix the audio
refclk source") the clock nodes of the am62p and j722 are the same. Move
them into the commit dtsi.
Please note, that for the j722s the nodes are renamed from clock@ to
clock-controller@.
Suggested-by: Udit Kumar <u-kumar1@...com>
Signed-off-by: Michael Walle <mwalle@...nel.org>
---
.../dts/ti/k3-am62p-j722s-common-main.dtsi | 18 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 20 -------------------
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 18 -----------------
3 files changed, 18 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 3289244eca13..0a42fefb6915 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -46,6 +46,24 @@ main_conf: bus@...000 {
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x20000>;
+ audio_refclk0: clock-controller@...0 {
+ compatible = "ti,am62-audio-refclk";
+ reg = <0x82e0 0x4>;
+ clocks = <&k3_clks 157 0>;
+ assigned-clocks = <&k3_clks 157 0>;
+ assigned-clock-parents = <&k3_clks 157 16>;
+ #clock-cells = <0>;
+ };
+
+ audio_refclk1: clock-controller@...4 {
+ compatible = "ti,am62-audio-refclk";
+ reg = <0x82e4 0x4>;
+ clocks = <&k3_clks 157 18>;
+ assigned-clocks = <&k3_clks 157 18>;
+ assigned-clock-parents = <&k3_clks 157 34>;
+ #clock-cells = <0>;
+ };
+
phy_gmii_sel: phy@...4 {
compatible = "ti,am654-phy-gmii-sel";
reg = <0x4044 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 908cc0760e7d..13d32cbff186 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -42,26 +42,6 @@ &inta_main_dmss {
ti,interrupt-ranges = <5 69 35>;
};
-&main_conf {
- audio_refclk0: clock-controller@...0 {
- compatible = "ti,am62-audio-refclk";
- reg = <0x82e0 0x4>;
- clocks = <&k3_clks 157 0>;
- assigned-clocks = <&k3_clks 157 0>;
- assigned-clock-parents = <&k3_clks 157 16>;
- #clock-cells = <0>;
- };
-
- audio_refclk1: clock-controller@...4 {
- compatible = "ti,am62-audio-refclk";
- reg = <0x82e4 0x4>;
- clocks = <&k3_clks 157 18>;
- assigned-clocks = <&k3_clks 157 18>;
- assigned-clock-parents = <&k3_clks 157 34>;
- #clock-cells = <0>;
- };
-};
-
&main_gpio0 {
gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
<&main_pmx0 70 72 22>;
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 04de29da40f1..fc85a08428c3 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -462,24 +462,6 @@ serdes_ln_ctrl: mux-controller@...0 {
mux-reg-masks = <0x00 0x3>, /* SERDES0 lane0 select */
<0x10 0x3>; /* SERDES1 lane0 select */
};
-
- audio_refclk0: clock@...0 {
- compatible = "ti,am62-audio-refclk";
- reg = <0x82e0 0x4>;
- clocks = <&k3_clks 157 0>;
- assigned-clocks = <&k3_clks 157 0>;
- assigned-clock-parents = <&k3_clks 157 16>;
- #clock-cells = <0>;
- };
-
- audio_refclk1: clock@...4 {
- compatible = "ti,am62-audio-refclk";
- reg = <0x82e4 0x4>;
- clocks = <&k3_clks 157 18>;
- assigned-clocks = <&k3_clks 157 18>;
- assigned-clock-parents = <&k3_clks 157 34>;
- #clock-cells = <0>;
- };
};
&wkup_conf {
--
2.47.3
Powered by blists - more mailing lists