| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251104001001.3833651-18-terry.bowman@amd.com>
Date: Mon, 3 Nov 2025 18:09:53 -0600
From: Terry Bowman <terry.bowman@....com>
To: <dave@...olabs.net>, <jonathan.cameron@...wei.com>,
<dave.jiang@...el.com>, <alison.schofield@...el.com>,
<dan.j.williams@...el.com>, <bhelgaas@...gle.com>, <shiju.jose@...wei.com>,
<ming.li@...omail.com>, <Smita.KoralahalliChannabasappa@....com>,
<rrichter@....com>, <dan.carpenter@...aro.org>,
<PradeepVineshReddy.Kodamati@....com>, <lukas@...ner.de>,
<Benjamin.Cheatham@....com>, <sathyanarayanan.kuppuswamy@...ux.intel.com>,
<linux-cxl@...r.kernel.org>, <alucerop@....com>, <ira.weiny@...el.com>
CC: <linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>,
<terry.bowman@....com>
Subject: [PATCH v13 17/25] cxl: Introduce cxl_pci_drv_bound() to check for bound driver
CXL devices handle protocol errors via driver-specific callbacks rather
than the generic pci_driver::err_handlers by default. The callbacks are
implemented in the cxl_pci driver and are not part of struct pci_driver, so
cxl_core must verify that a device is actually bound to the cxl_pci
module's driver before invoking the callbacks (the device could be bound
to another driver, e.g. VFIO).
However, cxl_core can not reference symbols in the cxl_pci module because
it creates a circular dependency. This prevents cxl_core from checking the
EP's bound driver and calling the callbacks.
To fix this, move drivers/cxl/pci.c into drivers/cxl/core/pci_drv.c and
build it as part of the cxl_core module. Compile into cxl_core using
CXL_PCI and CXL_CORE Kconfig dependencies. This removes the standalone
cxl_pci module, consolidates the cxl_pci driver code into cxl_core, and
eliminates the circular dependency so cxl_core can safely perform
bound-driver checks and invoke the CXL PCI callbacks.
Introduce cxl_pci_drv_bound() to return boolean depending on if the PCI EP
parameter is bound to a CXL driver instance. This will be used in future
patch when dequeuing work from the kfifo.
Signed-off-by: Terry Bowman <terry.bowman@....com>
Reviewed-by: Dave Jiang <dave.jiang@...el.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@....com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@...wei.com>
---
Changes in v12->v13;
- Add Dave Jiang's review-by.
Changes in v11->v12:
- Add device_lock_assert() in cxl_pci_drv_bound() (Dave Jiang)
- Add Jonathan's review-by
Changes in v11->v12:
- None
Changes in v10->v11:
- cxl_error_detected() - Change handlers' scoped_guard() to guard() (Jonathan)
- cxl_error_detected() - Remove extra line (Shiju)
- Changes moved to core/ras.c (Terry)
- cxl_error_detected(), remove 'ue' and return with function call. (Jonathan)
- Remove extra space in documentation for PCI_ERS_RESULT_PANIC definition
- Move #include "pci.h from cxl.h to core.h (Terry)
- Remove unnecessary includes of cxl.h and core.h in mem.c (Terry)
---
drivers/cxl/Kconfig | 6 +++---
drivers/cxl/Makefile | 2 --
drivers/cxl/core/Makefile | 1 +
drivers/cxl/core/core.h | 9 +++++++++
drivers/cxl/{pci.c => core/pci_drv.c} | 21 +++++++++++++--------
drivers/cxl/core/port.c | 3 +++
tools/testing/cxl/Kbuild | 1 +
7 files changed, 30 insertions(+), 13 deletions(-)
rename drivers/cxl/{pci.c => core/pci_drv.c} (99%)
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
index ffe6ad981434..360c78fa7e97 100644
--- a/drivers/cxl/Kconfig
+++ b/drivers/cxl/Kconfig
@@ -20,7 +20,7 @@ menuconfig CXL_BUS
if CXL_BUS
config CXL_PCI
- tristate "PCI manageability"
+ bool "PCI manageability"
default CXL_BUS
help
The CXL specification defines a "CXL memory device" sub-class in the
@@ -29,12 +29,12 @@ config CXL_PCI
memory to be mapped into the system address map (Host-managed Device
Memory (HDM)).
- Say 'y/m' to enable a driver that will attach to CXL memory expander
+ Say 'y' to enable a driver that will attach to CXL memory expander
devices enumerated by the memory device class code for configuration
and management primarily via the mailbox interface. See Chapter 2.3
Type 3 CXL Device in the CXL 2.0 specification for more details.
- If unsure say 'm'.
+ If unsure say 'y'.
config CXL_MEM_RAW_COMMANDS
bool "RAW Command Interface for Memory Devices"
diff --git a/drivers/cxl/Makefile b/drivers/cxl/Makefile
index 2caa90fa4bf2..ff6add88b6ae 100644
--- a/drivers/cxl/Makefile
+++ b/drivers/cxl/Makefile
@@ -12,10 +12,8 @@ obj-$(CONFIG_CXL_PORT) += cxl_port.o
obj-$(CONFIG_CXL_ACPI) += cxl_acpi.o
obj-$(CONFIG_CXL_PMEM) += cxl_pmem.o
obj-$(CONFIG_CXL_MEM) += cxl_mem.o
-obj-$(CONFIG_CXL_PCI) += cxl_pci.o
cxl_port-y := port.o
cxl_acpi-y := acpi.o
cxl_pmem-y := pmem.o security.o
cxl_mem-y := mem.o
-cxl_pci-y := pci.o
diff --git a/drivers/cxl/core/Makefile b/drivers/cxl/core/Makefile
index fa1d4aed28b9..2937d0ddcce2 100644
--- a/drivers/cxl/core/Makefile
+++ b/drivers/cxl/core/Makefile
@@ -21,3 +21,4 @@ cxl_core-$(CONFIG_CXL_FEATURES) += features.o
cxl_core-$(CONFIG_CXL_EDAC_MEM_FEATURES) += edac.o
cxl_core-$(CONFIG_CXL_RAS) += ras.o
cxl_core-$(CONFIG_CXL_RCH_RAS) += ras_rch.o
+cxl_core-$(CONFIG_CXL_PCI) += pci_drv.o
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
index e47ae7365ce0..61c6726744d7 100644
--- a/drivers/cxl/core/core.h
+++ b/drivers/cxl/core/core.h
@@ -195,4 +195,13 @@ int cxl_set_feature(struct cxl_mailbox *cxl_mbox, const uuid_t *feat_uuid,
u16 *return_code);
#endif
+#ifdef CONFIG_CXL_PCI
+bool cxl_pci_drv_bound(struct pci_dev *pdev);
+int cxl_pci_driver_init(void);
+void cxl_pci_driver_exit(void);
+#else
+static inline bool cxl_pci_drv_bound(struct pci_dev *pdev) { return false; };
+static inline int cxl_pci_driver_init(void) { return 0; }
+static inline void cxl_pci_driver_exit(void) { }
+#endif
#endif /* __CXL_CORE_H__ */
diff --git a/drivers/cxl/pci.c b/drivers/cxl/core/pci_drv.c
similarity index 99%
rename from drivers/cxl/pci.c
rename to drivers/cxl/core/pci_drv.c
index bd95be1f3d5c..06f2fd993cb0 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/core/pci_drv.c
@@ -1131,6 +1131,17 @@ static struct pci_driver cxl_pci_driver = {
},
};
+bool cxl_pci_drv_bound(struct pci_dev *pdev)
+{
+ device_lock_assert(&pdev->dev);
+
+ if (pdev->driver != &cxl_pci_driver)
+ pr_err_ratelimited("%s device not bound to CXL PCI driver\n",
+ pci_name(pdev));
+
+ return (pdev->driver == &cxl_pci_driver);
+}
+
#define CXL_EVENT_HDR_FLAGS_REC_SEVERITY GENMASK(1, 0)
static void cxl_handle_cper_event(enum cxl_event_type ev_type,
struct cxl_cper_event_rec *rec)
@@ -1177,7 +1188,7 @@ static void cxl_cper_work_fn(struct work_struct *work)
}
static DECLARE_WORK(cxl_cper_work, cxl_cper_work_fn);
-static int __init cxl_pci_driver_init(void)
+int __init cxl_pci_driver_init(void)
{
int rc;
@@ -1192,15 +1203,9 @@ static int __init cxl_pci_driver_init(void)
return rc;
}
-static void __exit cxl_pci_driver_exit(void)
+void cxl_pci_driver_exit(void)
{
cxl_cper_unregister_work(&cxl_cper_work);
cancel_work_sync(&cxl_cper_work);
pci_unregister_driver(&cxl_pci_driver);
}
-
-module_init(cxl_pci_driver_init);
-module_exit(cxl_pci_driver_exit);
-MODULE_DESCRIPTION("CXL: PCI manageability");
-MODULE_LICENSE("GPL v2");
-MODULE_IMPORT_NS("CXL");
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 48f6a1492544..b70e1b505b5c 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -2507,6 +2507,8 @@ static __init int cxl_core_init(void)
if (rc)
goto err_ras;
+ cxl_pci_driver_init();
+
return 0;
err_ras:
@@ -2522,6 +2524,7 @@ static __init int cxl_core_init(void)
static void cxl_core_exit(void)
{
+ cxl_pci_driver_exit();
cxl_ras_exit();
cxl_region_exit();
bus_unregister(&cxl_bus_type);
diff --git a/tools/testing/cxl/Kbuild b/tools/testing/cxl/Kbuild
index 6905f8e710ab..d8b8272ef87b 100644
--- a/tools/testing/cxl/Kbuild
+++ b/tools/testing/cxl/Kbuild
@@ -65,6 +65,7 @@ cxl_core-$(CONFIG_CXL_FEATURES) += $(CXL_CORE_SRC)/features.o
cxl_core-$(CONFIG_CXL_EDAC_MEM_FEATURES) += $(CXL_CORE_SRC)/edac.o
cxl_core-$(CONFIG_CXL_RAS) += $(CXL_CORE_SRC)/ras.o
cxl_core-$(CONFIG_CXL_RCH_RAS) += $(CXL_CORE_SRC)/ras_rch.o
+cxl_core-$(CONFIG_CXL_PCI) += $(CXL_CORE_SRC)/pci_drv.o
cxl_core-y += config_check.o
cxl_core-y += cxl_core_test.o
cxl_core-y += cxl_core_exports.o
--
2.34.1
Powered by blists - more mailing lists