[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251103-mcp47feb02-v2-0-8c37741bd97a@microchip.com>
Date: Mon, 3 Nov 2025 17:50:28 +0200
From: Ariana Lazar <ariana.lazar@...rochip.com>
To: Ariana Lazar <ariana.lazar@...rochip.com>, Jonathan Cameron
<jic23@...nel.org>, David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>, Andy Shevchenko
<andy@...nel.org>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
CC: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v2 0/2] Adding support for Microchip MCP47FEB02
Adding support for Microchip MCP47F(E/V)B(0/1/2)1, MCP47F(E/V)B(0/1/2)2,
MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8 series of buffered voltage
output Digital-to-Analog converters with an I2C Interface. This driver
covers the following part numbers:
- With nonvolatile memory:
- MCP47FEB01, MCP47FEB11, MCP47FEB21, MCP47FEB02, MCP47FEB12
- MCP47FEB22, MCP47FVB01, MCP47FVB11, MCP47FVB21, MCP47FVB02
- With volatile memory:
- MCP47FVB12, MCP47FVB02, MCP47FVB12, MCP47FVB22, MCP47FVB04
- MCP47FVB14, MCP47FVB24, MCP47FVB04, MCP47FVB08, MCP47FVB18
- MCP47FVB28, MCP47FEB04, MCP47FEB14 and MCP47FEB24
The families support up to 8 output channels. The devices can be 8-bit,
10-bit and 12-bit resolution.
---
Changes in v2:
v2:
- fix review comments device tree binding:
corrected the use of patternProperties and enum with an array of
channel numbers instead of minimum/maximum
gave more specific names to the labels of the channels
removed '|' from where it was unneccesarry
removed unneccesarry setting of attributes to true
- fix review comments driver:
replaced custom write function with regmap_update_bits.
added read_flag_mask field to regmap_config struct and shifted all
register addresses with 3 bits in order to correctly apply R/W
command mask
changed cache_type field of regmap_config structs to REGCACHE_MAPLE
added val_format_endian field to regmap_config struct as
REGMAP_ENDIAN_BIG
kept in powerdown_mode last value written to register before reloading
the driver
created defines for magic bits used in probe function
removed unneccesarry channel enabled checks
added in parse_fw initialization of reg with 0, check for valid
reg number after reading it from devicetree and nonzero num_channels
initialized vref_mv, vref1_mv, vdd_mv
replaced CH_0, ... CH_7 masks with DAC_CTRL_BITS(ch) and G_0, ... G_7
with DAC_GAIN_BIT(ch)
corrected write_powerdown function to write normal operation into
specific bit mask from power-down register when a channel exits
power-down mode.
added const pointer to info in data struct
deleted device_property_present checks for vref, vref1. Read vref1 only
if have_ext_vref1 is present in features
protected write operations with mutex using scoped_guard or guard
refactored probe function by creating 2 setup functions,
mcp47feb02_init_ctrl_regs and mcp47feb02_init_ch_scales.
corrected info/debug messages where it was specified
used devm_iio_device_register and deleted remove() function
in write_raw only update struct data if regmap write succeeds
v1:
- first version committed to review
- Link to v1: https://lore.kernel.org/r/20250922-mcp47feb02-v1-0-06cb4acaa347@microchip.com
Signed-off-by: Ariana Lazar <ariana.lazar@...rochip.com>
---
Ariana Lazar (2):
dt-bindings: iio: dac: adding support for Microchip MCP47FEB02
iio: dac: adding support for Microchip MCP47FEB02
.../bindings/iio/dac/microchip,mcp47feb02.yaml | 302 +++++
MAINTAINERS | 7 +
drivers/iio/dac/Kconfig | 16 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/mcp47feb02.c | 1233 ++++++++++++++++++++
5 files changed, 1559 insertions(+)
---
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
change-id: 20250825-mcp47feb02-31c77857ae29
Best regards,
--
Ariana Lazar <ariana.lazar@...rochip.com>
Powered by blists - more mailing lists