[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <08ca312e2f2f13a8b9267b0bdb93f3ac484d9365.1762354366.git.tommaso.merciai.xr@bp.renesas.com>
Date: Wed, 5 Nov 2025 16:39:10 +0100
From: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
To: tomm.merciai@...il.com
Cc: linux-renesas-soc@...r.kernel.org,
biju.das.jz@...renesas.com,
Tommaso Merciai <tommaso.merciai.xr@...renesas.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Peter Rosin <peda@...ntia.se>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 14/21] arm64: dts: renesas: r9a09g057: Add USB2.0 VBUS_SEL mux-controller support
Enable control of USB2.0 VBUSEN via the VBUS_SEL bit in the VBENCTL
register. According to the RZ/V2H(P) SoC hardware manual, OTG channels
require VBUS_SEL set, while HOST-only channels require it cleared.
Add #mux-state-cells = <1>; to the usb20phyrst and usb21phyrst reset
nodes to expose them as mux controllers.
Set the required mux-states in usb2_phy0 (OTG: state 1) and usb2_phy1
(HOST: state 0) nodes.
This enables proper VBUSEN management for OTG and HOST-only USB2.0
channels.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
---
v1->v2:
- New patch
arch/arm64/boot/dts/renesas/r9a09g057.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
index 40b15f1db930..b94a06b6f83e 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
@@ -989,6 +989,7 @@ usb2_phy0: usb-phy@...00200 {
resets = <&usb20phyrst>;
#phy-cells = <1>;
power-domains = <&cpg>;
+ mux-states = <&usb20phyrst 1>;
status = "disabled";
};
@@ -1002,6 +1003,7 @@ usb2_phy1: usb-phy@...10200 {
resets = <&usb21phyrst>;
#phy-cells = <1>;
power-domains = <&cpg>;
+ mux-states = <&usb21phyrst 0>;
status = "disabled";
};
@@ -1029,6 +1031,7 @@ usb20phyrst: usb20phy-reset@...30000 {
resets = <&cpg 0xaf>;
power-domains = <&cpg>;
#reset-cells = <0>;
+ #mux-state-cells = <1>;
status = "disabled";
};
@@ -1039,6 +1042,7 @@ usb21phyrst: usb21phy-reset@...40000 {
resets = <&cpg 0xaf>;
power-domains = <&cpg>;
#reset-cells = <0>;
+ #mux-state-cells = <1>;
status = "disabled";
};
--
2.43.0
Powered by blists - more mailing lists