[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251105201406.1210856-1-igor@reznichenko.net>
Date: Wed, 5 Nov 2025 12:14:04 -0800
From: Igor Reznichenko <igor@...nichenko.net>
To: linux@...ck-us.net,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
corbet@....net
Cc: david.hunter.linux@...il.com,
devicetree@...r.kernel.org,
linux-doc@...r.kernel.org,
linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org,
skhan@...uxfoundation.org
Subject: [PATCH v4 0/2] hwmon: Add TSC1641 I2C power monitor driver
This patch series adds support for the ST Microelectronics TSC1641
I2C power monitor. The TSC1641 provides bus voltage, current, power,
and temperature measurements via the hwmon subsystem. The driver
supports optional ALERT pin polarity configuration and exposes the
shunt resistor value and update interval via sysfs.
Tested on Raspberry Pi 3B+ with a TSC1641 evaluation board.
v3: https://lore.kernel.org/linux-hwmon/20251104003320.1120514-1-igor@reznichenko.net/
Changes in v4:
- Updated devicetree binding example
- Removed unnecessary check for !current_lsb
- Added clamping to current val
- No extra calls to validate_shunt()
Igor Reznichenko (2):
dt-bindings: hwmon: ST TSC1641 power monitor
hwmon: Add TSC1641 I2C power monitor driver
.../devicetree/bindings/hwmon/st,tsc1641.yaml | 63 ++
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/tsc1641.rst | 87 ++
drivers/hwmon/Kconfig | 12 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/tsc1641.c | 748 ++++++++++++++++++
6 files changed, 912 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml
create mode 100644 Documentation/hwmon/tsc1641.rst
create mode 100644 drivers/hwmon/tsc1641.c
--
2.43.0
Powered by blists - more mailing lists