linux-kernel - [PATCH V9 2/3] leds: pwm: Add optional GPIO enable pin support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20251105065012.88796-3-Qing-wu.Li@leica-geosystems.com.cn>
Date: Wed,  5 Nov 2025 06:50:11 +0000
From: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
To: lee@...nel.org,
	pavel@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	linux-leds@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Qing-wu.Li@...ca-geosystems.com.cn
Subject: [PATCH V9 2/3] leds: pwm: Add optional GPIO enable pin support

Add support for optional GPIO-based enable pin control to PWM LED driver.
Some PWM LED driver chips like TPS92380 and LT3743 require a separate
enable signal in addition to PWM control. Implement support for such
GPIO control through the "enable-gpios" device tree property, activating
the pin when LED brightness is non-zero and deactivating it when off.

Tested on i.MX8MP EVK with TPS92380 LED driver chip

Signed-off-by: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
---
 drivers/leds/leds-pwm.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index c73134e7b951..aa9e14d912bf 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -9,6 +9,7 @@
  * based on leds-gpio.c by Raphael Assenat <raph@...com>
  */
 
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
@@ -26,6 +27,7 @@ struct led_pwm {
 };
 
 struct led_pwm_data {
+	struct gpio_desc	*enable_gpio;
 	struct led_classdev	cdev;
 	struct pwm_device	*pwm;
 	struct pwm_state	pwmstate;
@@ -51,6 +53,8 @@ static int led_pwm_set(struct led_classdev *led_cdev,
 	if (led_dat->active_low)
 		duty = led_dat->pwmstate.period - duty;
 
+	gpiod_set_value_cansleep(led_dat->enable_gpio,  !!brightness);
+
 	led_dat->pwmstate.duty_cycle = duty;
 	/*
 	 * Disabling a PWM doesn't guarantee that it emits the inactive level.
@@ -132,6 +136,21 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
 		break;
 	}
 
+	/*
+	 * Claim the GPIO as GPIOD_ASIS and set the value
+	 * later on to honor the different default states
+	 */
+	led_data->enable_gpio = devm_fwnode_gpiod_get(dev, fwnode, "enable", GPIOD_ASIS, NULL);
+	if (IS_ERR(led_data->enable_gpio)) {
+		if (PTR_ERR(led_data->enable_gpio) == -ENOENT)
+			/* Enable GPIO is optional */
+			led_data->enable_gpio = NULL;
+		else
+			return PTR_ERR(led_data->enable_gpio);
+	}
+
+	gpiod_direction_output(led_data->enable_gpio, !!led_data->cdev.brightness);
+
 	ret = devm_led_classdev_register_ext(dev, &led_data->cdev, &init_data);
 	if (ret) {
 		dev_err(dev, "failed to register PWM led for %s: %d\n",
-- 
2.43.0