[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20251105-faithful-carmine-bat-257e39-mkl@pengutronix.de>
Date: Wed, 5 Nov 2025 13:33:54 +0100
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Sascha Hauer <s.hauer@...gutronix.de>, Stephen Boyd <sboyd@...nel.org>
Cc: Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, kernel@...gutronix.de, Linus Walleij <linus.walleij@...aro.org>,
linux-gpio@...r.kernel.org, Alvin Šipraga <alsi@...g-olufsen.dk>
Subject: Re: [PATCH v7 0/2] clk: add support for TI CDCE6214
On 01.10.2025 10:12:52, Sascha Hauer wrote:
> The CDCE6214 is a Ultra-Low Power Clock Generator With One PLL, Four
> Differential Outputs, Two Inputs, and Internal EEPROM.
>
> This series adds a common clk framework driver for this chip along with
> the dt-bindings document. The cdce6214 needs several pins to be
> configured for different input/output modes which are abstracted with a
> pinctrl driver.
>
> In v5 I tried to split up the patch into a non controversial part (to be
> applied) and a part which needs more discussion (to be applied later).
> That was not very well received, so I merged it back in v6. I didn't
> mention that explicitly in v6, so doing it now.
>
> v7 contains only small changes, mostly binding updates requested by Rob.
Stephen, can you have a look at this driver?
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists