linux-kernel - [PATCH v2] arm64: dts: qcom: hamoa-iot-evk: Add backlight support for eDP panel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251106-hamoa_dvt_backlight-v2-1-9f844c8f8110@oss.qualcomm.com>
Date: Thu, 06 Nov 2025 15:12:06 +0800
From: Yongxing Mou <yongxing.mou@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Yongxing Mou <yongxing.mou@....qualcomm.com>
Subject: [PATCH v2] arm64: dts: qcom: hamoa-iot-evk: Add backlight support
 for eDP panel

Previously, the eDP panel backlight was enabled via UEFI. Added backlight
control node in kernel DTS due to some meta may not enable the backlight.

Aligned with other x1e80100-based platforms: the PWM signal is controlled
by PMK8550, and the backlight enable signal is handled by PMC8380.

Signed-off-by: Yongxing Mou <yongxing.mou@....qualcomm.com>
---
Changes in v2:
- Add hamoa-iot-evk to the commit subject. [Konrad]
- Correct the property order in the vreg_edp_bl node. [Konrad]
- Link to v1: https://lore.kernel.org/r/20251028-hamoa_dvt_backlight-v1-1-97ecb8d0ad01@oss.qualcomm.com
---
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 55 ++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index 36dd6599402b..454aad40de34 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -17,6 +17,16 @@ aliases {
 		serial1 = &uart14;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 5000000>;
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
 	wcd938x: audio-codec {
 		compatible = "qcom,wcd9385-codec";
 
@@ -183,6 +193,22 @@ vreg_edp_3p3: regulator-edp-3p3 {
 		regulator-boot-on;
 	};
 
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_bl_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	vreg_nvme: regulator-nvme {
 		compatible = "regulator-fixed";
 
@@ -819,6 +845,8 @@ &mdss_dp3 {
 	aux-bus {
 		panel {
 			compatible = "edp-panel";
+
+			backlight = <&backlight>;
 			power-supply = <&vreg_edp_3p3>;
 
 			port {
@@ -879,6 +907,22 @@ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
 	};
 };
 
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		input-disable;
+		output-enable;
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+
+};
+
 &pmc8380_5_gpios {
 	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
 		pins = "gpio8";
@@ -890,6 +934,17 @@ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
 	};
 };
 
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
+
 &smb2360_0 {
 	status = "okay";
 };

---
base-commit: f7d2388eeec24966fc4d5cf32d706f0514f29ac5
change-id: 20251028-hamoa_dvt_backlight-373528b7ce7e

Best regards,
-- 
Yongxing Mou <yongxing.mou@....qualcomm.com>