| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <21d31d05-a55e-4717-a44d-673aa395a5d0@linux.microsoft.com>
Date: Fri, 7 Nov 2025 16:25:21 -0600
From: Praveen K Paladugu <prapal@...ux.microsoft.com>
To: kys@...rosoft.com, haiyangz@...rosoft.com, wei.liu@...nel.org,
decui@...rosoft.com, tglx@...utronix.de, mingo@...hat.com,
linux-hyperv@...r.kernel.org, linux-kernel@...r.kernel.org, bp@...en8.de,
dave.hansen@...ux.intel.com, x86@...nel.org, hpa@...or.com, arnd@...db.de
Cc: anbelski@...ux.microsoft.com, easwar.hariharan@...ux.microsoft.com,
nunodasneves@...ux.microsoft.com, skinsburskii@...ux.microsoft.com,
mhklinux@...look.com
Subject: Re: [PATCH v4 2/3] hyperv: Use reboot notifier to configure sleep
state
On 11/7/2025 4:16 PM, Praveen K Paladugu wrote:
> Configure sleep state information in mshv hypervisor. This sleep state
> information from ACPI will be used by hypervisor to poweroff the host.
>
> Signed-off-by: Praveen K Paladugu <prapal@...ux.microsoft.com>
> Co-developed-by: Anatol Belski <anbelski@...ux.microsoft.com>
> Signed-off-by: Anatol Belski <anbelski@...ux.microsoft.com>
> ---
> arch/x86/hyperv/hv_init.c | 7 +++
> arch/x86/include/asm/mshyperv.h | 2 +
> drivers/hv/mshv_common.c | 80 +++++++++++++++++++++++++++++++++
> 3 files changed, 89 insertions(+)
>
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index e28737ec7054..645b52dd732e 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -555,6 +555,13 @@ void __init hyperv_init(void)
>
> hv_remap_tsc_clocksource();
> hv_root_crash_init();
> + /*
> + * The notifier registration might fail at various hops.
> + * Corresponding error messages will land in dmesg. There is
> + * otherwise nothing that can be specifically done to handle
> + * failures here.
> + */
> + hv_sleep_notifiers_register();
> } else {
> hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
> wrmsrq(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index 1342d55c2545..fbc1233175ce 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -181,8 +181,10 @@ int hyperv_fill_flush_guest_mapping_list(
> void hv_apic_init(void);
> void __init hv_init_spinlocks(void);
> bool hv_vcpu_is_preempted(int vcpu);
> +void hv_sleep_notifiers_register(void);
> #else
> static inline void hv_apic_init(void) {}
> +static inline void hv_sleep_notifiers_register(void) {};
> #endif
>
> struct irq_domain *hv_create_pci_msi_domain(void);
> diff --git a/drivers/hv/mshv_common.c b/drivers/hv/mshv_common.c
> index aa2be51979fd..d1a1daa52b65 100644
> --- a/drivers/hv/mshv_common.c
> +++ b/drivers/hv/mshv_common.c
> @@ -14,6 +14,9 @@
> #include <asm/mshyperv.h>
> #include <linux/resume_user_mode.h>
> #include <linux/export.h>
> +#include <linux/acpi.h>
> +#include <linux/notifier.h>
> +#include <linux/reboot.h>
>
> #include "mshv.h"
>
> @@ -138,3 +141,80 @@ int hv_call_get_partition_property(u64 partition_id,
> return 0;
> }
> EXPORT_SYMBOL_GPL(hv_call_get_partition_property);
> +
> +#if IS_ENABLED(CONFIG_ACPI)
> +/*
> + * Corresponding sleep states have to be initialized in order for a subsequent
> + * HVCALL_ENTER_SLEEP_STATE call to succeed. Currently only S5 state as per
> + * ACPI 6.4 chapter 7.4.2 is relevant, while S1, S2 and S3 can be supported.
> + *
> + * In order to pass proper PM values to mshv, ACPI should be initialized and
> + * should support S5 sleep state when this method is invoked.
> + */
> +static int hv_initialize_sleep_states(void)
> +{
> + u64 status;
> + unsigned long flags;
> + struct hv_input_set_system_property *in;
> + acpi_status acpi_status;
> + u8 sleep_type_a, sleep_type_b;
> +
> + if (!acpi_sleep_state_supported(ACPI_STATE_S5)) {
> + pr_err("%s: S5 sleep state not supported.\n", __func__);
> + return -ENODEV;
> + }
> +
> + acpi_status = acpi_get_sleep_type_data(ACPI_STATE_S5, &sleep_type_a,
> + &sleep_type_b);
> + if (ACPI_FAILURE(acpi_status))
> + return -ENODEV;
> +
> + local_irq_save(flags);
> + in = *this_cpu_ptr(hyperv_pcpu_input_arg);
> + memset(in, 0, sizeof(*in));
> +
> + in->property_id = HV_SYSTEM_PROPERTY_SLEEP_STATE;
> + in->set_sleep_state_info.sleep_state = HV_SLEEP_STATE_S5;
> + in->set_sleep_state_info.pm1a_slp_typ = sleep_type_a;
> + in->set_sleep_state_info.pm1b_slp_typ = sleep_type_b;
> +
> + status = hv_do_hypercall(HVCALL_SET_SYSTEM_PROPERTY, in, NULL);
> + local_irq_restore(flags);
> +
> + if (!hv_result_success(status)) {
> + hv_status_err(status, "\n");
> + return hv_result_to_errno(status);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * This notifier initializes sleep states in mshv hypervisor which will be
> + * used during power off.
> + */
> +static int hv_reboot_notifier_handler(struct notifier_block *this,
> + unsigned long code, void *another)
> +{
> + int ret = 0;
> +
> + if (code == SYS_POWER_OFF)
This patchset only addresses poweroff.
Reboot currently works via ACPI. Nothing more is needed there.
`kernel_halt` needs the use of a different hypercall. Support for
Halting will be introduced later.
> + ret = hv_initialize_sleep_states();
> +
> + return ret ? NOTIFY_DONE : NOTIFY_OK;
> +}
> +
> +static struct notifier_block hv_reboot_notifier = {
> + .notifier_call = hv_reboot_notifier_handler,
> +};
> +
> +void hv_sleep_notifiers_register(void)
> +{
> + int ret;
> +
> + ret = register_reboot_notifier(&hv_reboot_notifier);
> + if (ret)
> + pr_err("%s: cannot register reboot notifier %d\n", __func__,
> + ret);
> +}
> +#endif
Powered by blists - more mailing lists