| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251107095530.114775-5-hal.feng@starfivetech.com>
Date: Fri, 7 Nov 2025 17:55:26 +0800
From: Hal Feng <hal.feng@...rfivetech.com>
To: Conor Dooley <conor+dt@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <pjw@...nel.org>,
Albert Ou <aou@...s.berkeley.edu>,
"Rafael J . Wysocki" <rafael@...nel.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kwilczynski@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Heinrich Schuchardt <heinrich.schuchardt@...onical.com>,
E Shattow <e@...eshell.de>
Cc: Hal Feng <hal.feng@...rfivetech.com>,
devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/8] riscv: dts: starfive: Split jh7110-common.dtsi and move opp table to it
Preparing to add JH7110S based board device trees, move the content of
jh7110-common.dtsi to the new file jh711x-common.dtsi and move opp table
to jh7110-common.dtsi.
Signed-off-by: Hal Feng <hal.feng@...rfivetech.com>
---
.../boot/dts/starfive/jh7110-common.dtsi | 665 +-----------------
.../boot/dts/starfive/jh711x-common.dtsi | 664 +++++++++++++++++
arch/riscv/boot/dts/starfive/jh711x.dtsi | 16 -
3 files changed, 678 insertions(+), 667 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh711x-common.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 809274625615..dd5805ef70a1 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -5,660 +5,23 @@
*/
/dts-v1/;
-#include "jh711x.dtsi"
-#include "jh7110-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
+#include "jh711x-common.dtsi"
-/ {
- aliases {
- ethernet0 = &gmac0;
- i2c0 = &i2c0;
- i2c2 = &i2c2;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- mmc0 = &mmc0;
- mmc1 = &mmc1;
- serial0 = &uart0;
+&cpu_opp {
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ opp-microvolt = <800000>;
};
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@...00000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0x1 0x0>;
- bootph-pre-ram;
- };
-
- gpio-restart {
- compatible = "gpio-restart";
- gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
- priority = <224>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status_power: led-0 {
- gpios = <&aongpio 3 GPIO_ACTIVE_HIGH>;
- };
- };
-
- pwmdac_codec: audio-codec {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
- #address-cells = <1>;
- #size-cells = <0>;
-
- simple-audio-card,dai-link@0 {
- reg = <0>;
- format = "left_j";
- bitclock-master = <&sndcpu0>;
- frame-master = <&sndcpu0>;
-
- sndcpu0: cpu {
- sound-dai = <&pwmdac>;
- };
-
- codec {
- sound-dai = <&pwmdac_codec>;
- };
- };
- };
-};
-
-&cpus {
- timebase-frequency = <4000000>;
-};
-
-&dvp_clk {
- clock-frequency = <74250000>;
-};
-
-&gmac0_rgmii_rxin {
- clock-frequency = <125000000>;
-};
-
-&gmac0_rmii_refin {
- clock-frequency = <50000000>;
-};
-
-&gmac1_rgmii_rxin {
- clock-frequency = <125000000>;
-};
-
-&gmac1_rmii_refin {
- clock-frequency = <50000000>;
-};
-
-&hdmitx0_pixelclk {
- clock-frequency = <297000000>;
-};
-
-&i2srx_bclk_ext {
- clock-frequency = <12288000>;
-};
-
-&i2srx_lrck_ext {
- clock-frequency = <192000>;
-};
-
-&i2stx_bclk_ext {
- clock-frequency = <12288000>;
-};
-
-&i2stx_lrck_ext {
- clock-frequency = <192000>;
-};
-
-&mclk_ext {
- clock-frequency = <12288000>;
-};
-
-&osc {
- clock-frequency = <24000000>;
-};
-
-&rtc_osc {
- clock-frequency = <32768>;
-};
-
-&tdm_ext {
- clock-frequency = <49152000>;
-};
-
-&camss {
- assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
- <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
- assigned-clock-rates = <49500000>, <198000000>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- };
-
- port@1 {
- reg = <1>;
-
- camss_from_csi2rx: endpoint {
- remote-endpoint = <&csi2rx_to_camss>;
- };
- };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <800000>;
};
-};
-
-&csi2rx {
- assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
- assigned-clock-rates = <297000000>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- /* remote MIPI sensor endpoint */
- };
-
- port@1 {
- reg = <1>;
-
- csi2rx_to_camss: endpoint {
- remote-endpoint = <&camss_from_csi2rx>;
- };
- };
+ opp-750000000 {
+ opp-hz = /bits/ 64 <750000000>;
+ opp-microvolt = <800000>;
};
-};
-
-&gmac0 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1040000>;
};
};
-
-&i2c0 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&i2c5 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_pins>;
- status = "okay";
-
- axp15060: pmic@36 {
- compatible = "x-powers,axp15060";
- reg = <0x36>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- regulators {
- vcc_3v3: dcdc1 {
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_3v3";
- };
-
- vdd_cpu: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1540000>;
- regulator-name = "vdd_cpu";
- };
-
- emmc_vdd: aldo4 {
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "emmc_vdd";
- };
- };
- };
-
- eeprom@50 {
- compatible = "atmel,24c04";
- reg = <0x50>;
- bootph-pre-ram;
- pagesize = <16>;
- };
-};
-
-&i2c6 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
- status = "okay";
-};
-
-&mmc0 {
- max-frequency = <100000000>;
- assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
- assigned-clock-rates = <50000000>;
- bus-width = <8>;
- bootph-pre-ram;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- cap-mmc-hw-reset;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&emmc_vdd>;
- status = "okay";
-};
-
-&mmc1 {
- max-frequency = <100000000>;
- assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
- assigned-clock-rates = <50000000>;
- bus-width = <4>;
- bootph-pre-ram;
- cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
- disable-wp;
- cap-sd-highspeed;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- status = "okay";
-};
-
-&pcie0 {
- perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
- phys = <&pciephy0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_pins>;
-};
-
-&pcie1 {
- perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
- phys = <&pciephy1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie1_pins>;
-};
-
-&pwmdac {
- pinctrl-names = "default";
- pinctrl-0 = <&pwmdac_pins>;
-};
-
-&qspi {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- nor_flash: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- bootph-pre-ram;
- cdns,read-delay = <2>;
- spi-max-frequency = <100000000>;
- cdns,tshsl-ns = <1>;
- cdns,tsd2d-ns = <1>;
- cdns,tchsh-ns = <1>;
- cdns,tslch-ns = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- spl@0 {
- reg = <0x0 0xf0000>;
- };
- uboot-env@...00 {
- reg = <0xf0000 0x10000>;
- };
- uboot@...000 {
- reg = <0x100000 0xf00000>;
- };
- };
- };
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm_pins>;
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
-};
-
-&syscrg {
- assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
- <&syscrg JH7110_SYSCLK_BUS_ROOT>,
- <&syscrg JH7110_SYSCLK_PERH_ROOT>,
- <&syscrg JH7110_SYSCLK_QSPI_REF>,
- <&syscrg JH7110_SYSCLK_CPU_CORE>,
- <&pllclk JH7110_PLLCLK_PLL0_OUT>;
- assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
- <&pllclk JH7110_PLLCLK_PLL2_OUT>,
- <&pllclk JH7110_PLLCLK_PLL2_OUT>,
- <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
- assigned-clock-rates = <0>, <0>, <0>, <0>, <500000000>, <1500000000>;
-};
-
-&sysgpio {
- i2c0_pins: i2c0-0 {
- i2c-pins {
- pinmux = <GPIOMUX(57, GPOUT_LOW,
- GPOEN_SYS_I2C0_CLK,
- GPI_SYS_I2C0_CLK)>,
- <GPIOMUX(58, GPOUT_LOW,
- GPOEN_SYS_I2C0_DATA,
- GPI_SYS_I2C0_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c2_pins: i2c2-0 {
- i2c-pins {
- pinmux = <GPIOMUX(3, GPOUT_LOW,
- GPOEN_SYS_I2C2_CLK,
- GPI_SYS_I2C2_CLK)>,
- <GPIOMUX(2, GPOUT_LOW,
- GPOEN_SYS_I2C2_DATA,
- GPI_SYS_I2C2_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c5_pins: i2c5-0 {
- bootph-pre-ram;
-
- i2c-pins {
- pinmux = <GPIOMUX(19, GPOUT_LOW,
- GPOEN_SYS_I2C5_CLK,
- GPI_SYS_I2C5_CLK)>,
- <GPIOMUX(20, GPOUT_LOW,
- GPOEN_SYS_I2C5_DATA,
- GPI_SYS_I2C5_DATA)>;
- bias-disable; /* external pull-up */
- bootph-pre-ram;
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c6_pins: i2c6-0 {
- i2c-pins {
- pinmux = <GPIOMUX(16, GPOUT_LOW,
- GPOEN_SYS_I2C6_CLK,
- GPI_SYS_I2C6_CLK)>,
- <GPIOMUX(17, GPOUT_LOW,
- GPOEN_SYS_I2C6_DATA,
- GPI_SYS_I2C6_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- mmc0_pins: mmc0-0 {
- mmc-pins {
- pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
- <PINMUX(PAD_SD0_CMD, 0)>,
- <PINMUX(PAD_SD0_DATA0, 0)>,
- <PINMUX(PAD_SD0_DATA1, 0)>,
- <PINMUX(PAD_SD0_DATA2, 0)>,
- <PINMUX(PAD_SD0_DATA3, 0)>,
- <PINMUX(PAD_SD0_DATA4, 0)>,
- <PINMUX(PAD_SD0_DATA5, 0)>,
- <PINMUX(PAD_SD0_DATA6, 0)>,
- <PINMUX(PAD_SD0_DATA7, 0)>;
- bias-pull-up;
- drive-strength = <12>;
- input-enable;
- };
- };
-
- mmc1_pins: mmc1-0 {
- clk-pins {
- pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- mmc-pins {
- pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
- GPOEN_SYS_SDIO1_CMD,
- GPI_SYS_SDIO1_CMD)>,
- <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
- GPOEN_SYS_SDIO1_DATA0,
- GPI_SYS_SDIO1_DATA0)>,
- <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
- GPOEN_SYS_SDIO1_DATA1,
- GPI_SYS_SDIO1_DATA1)>,
- <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
- GPOEN_SYS_SDIO1_DATA2,
- GPI_SYS_SDIO1_DATA2)>,
- <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
- GPOEN_SYS_SDIO1_DATA3,
- GPI_SYS_SDIO1_DATA3)>;
- bias-pull-up;
- drive-strength = <12>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- };
-
- pcie0_pins: pcie0-0 {
- clkreq-pins {
- pinmux = <GPIOMUX(27, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_NONE)>;
- bias-pull-down;
- drive-strength = <2>;
- input-enable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- wake-pins {
- pinmux = <GPIOMUX(32, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <2>;
- input-enable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- pcie1_pins: pcie1-0 {
- clkreq-pins {
- pinmux = <GPIOMUX(29, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_NONE)>;
- bias-pull-down;
- drive-strength = <2>;
- input-enable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- wake-pins {
- pinmux = <GPIOMUX(21, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <2>;
- input-enable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- pwmdac_pins: pwmdac-0 {
- pwmdac-pins {
- pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
- GPOEN_ENABLE,
- GPI_NONE)>,
- <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <2>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- pwm_pins: pwm-0 {
- pwm-pins {
- pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
- GPOEN_SYS_PWM0_CHANNEL0,
- GPI_NONE)>,
- <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
- GPOEN_SYS_PWM0_CHANNEL1,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- spi0_pins: spi0-0 {
- mosi-pins {
- pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
-
- miso-pins {
- pinmux = <GPIOMUX(53, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_SPI0_RXD)>;
- bias-pull-up;
- input-enable;
- input-schmitt-enable;
- };
-
- sck-pins {
- pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
- GPOEN_ENABLE,
- GPI_SYS_SPI0_CLK)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
-
- ss-pins {
- pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
- GPOEN_ENABLE,
- GPI_SYS_SPI0_FSS)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
- };
-
- uart0_pins: uart0-0 {
- tx-pins {
- pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pinmux = <GPIOMUX(6, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_UART0_RX)>;
- bias-disable; /* external pull-up */
- drive-strength = <2>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- };
-};
-
-&uart0 {
- bootph-pre-ram;
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&U74_1 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_2 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_3 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_4 {
- cpu-supply = <&vdd_cpu>;
-};
diff --git a/arch/riscv/boot/dts/starfive/jh711x-common.dtsi b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
new file mode 100644
index 000000000000..809274625615
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@...il.dk>
+ */
+
+/dts-v1/;
+#include "jh711x.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
+
+/ {
+ aliases {
+ ethernet0 = &gmac0;
+ i2c0 = &i2c0;
+ i2c2 = &i2c2;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x1 0x0>;
+ bootph-pre-ram;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+ priority = <224>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_power: led-0 {
+ gpios = <&aongpio 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ pwmdac_codec: audio-codec {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "left_j";
+ bitclock-master = <&sndcpu0>;
+ frame-master = <&sndcpu0>;
+
+ sndcpu0: cpu {
+ sound-dai = <&pwmdac>;
+ };
+
+ codec {
+ sound-dai = <&pwmdac_codec>;
+ };
+ };
+ };
+};
+
+&cpus {
+ timebase-frequency = <4000000>;
+};
+
+&dvp_clk {
+ clock-frequency = <74250000>;
+};
+
+&gmac0_rgmii_rxin {
+ clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+ clock-frequency = <50000000>;
+};
+
+&gmac1_rgmii_rxin {
+ clock-frequency = <125000000>;
+};
+
+&gmac1_rmii_refin {
+ clock-frequency = <50000000>;
+};
+
+&hdmitx0_pixelclk {
+ clock-frequency = <297000000>;
+};
+
+&i2srx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&mclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&osc {
+ clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+ clock-frequency = <32768>;
+};
+
+&tdm_ext {
+ clock-frequency = <49152000>;
+};
+
+&camss {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+ <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+ assigned-clock-rates = <49500000>, <198000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ camss_from_csi2rx: endpoint {
+ remote-endpoint = <&csi2rx_to_camss>;
+ };
+ };
+ };
+};
+
+&csi2rx {
+ assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+ assigned-clock-rates = <297000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ /* remote MIPI sensor endpoint */
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_to_camss: endpoint {
+ remote-endpoint = <&camss_from_csi2rx>;
+ };
+ };
+ };
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&i2c5 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ status = "okay";
+
+ axp15060: pmic@36 {
+ compatible = "x-powers,axp15060";
+ reg = <0x36>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ vcc_3v3: dcdc1 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3";
+ };
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1540000>;
+ regulator-name = "vdd_cpu";
+ };
+
+ emmc_vdd: aldo4 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "emmc_vdd";
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ bootph-pre-ram;
+ pagesize = <16>;
+ };
+};
+
+&i2c6 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ max-frequency = <100000000>;
+ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+ assigned-clock-rates = <50000000>;
+ bus-width = <8>;
+ bootph-pre-ram;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ cap-mmc-hw-reset;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&emmc_vdd>;
+ status = "okay";
+};
+
+&mmc1 {
+ max-frequency = <100000000>;
+ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+ assigned-clock-rates = <50000000>;
+ bus-width = <4>;
+ bootph-pre-ram;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ cap-sd-highspeed;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ status = "okay";
+};
+
+&pcie0 {
+ perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+};
+
+&pcie1 {
+ perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_pins>;
+};
+
+&pwmdac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwmdac_pins>;
+};
+
+&qspi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ nor_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ bootph-pre-ram;
+ cdns,read-delay = <2>;
+ spi-max-frequency = <100000000>;
+ cdns,tshsl-ns = <1>;
+ cdns,tsd2d-ns = <1>;
+ cdns,tchsh-ns = <1>;
+ cdns,tslch-ns = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ spl@0 {
+ reg = <0x0 0xf0000>;
+ };
+ uboot-env@...00 {
+ reg = <0xf0000 0x10000>;
+ };
+ uboot@...000 {
+ reg = <0x100000 0xf00000>;
+ };
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+};
+
+&syscrg {
+ assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
+ <&syscrg JH7110_SYSCLK_BUS_ROOT>,
+ <&syscrg JH7110_SYSCLK_PERH_ROOT>,
+ <&syscrg JH7110_SYSCLK_QSPI_REF>,
+ <&syscrg JH7110_SYSCLK_CPU_CORE>,
+ <&pllclk JH7110_PLLCLK_PLL0_OUT>;
+ assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+ <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+ <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+ <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>, <500000000>, <1500000000>;
+};
+
+&sysgpio {
+ i2c0_pins: i2c0-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(57, GPOUT_LOW,
+ GPOEN_SYS_I2C0_CLK,
+ GPI_SYS_I2C0_CLK)>,
+ <GPIOMUX(58, GPOUT_LOW,
+ GPOEN_SYS_I2C0_DATA,
+ GPI_SYS_I2C0_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c2_pins: i2c2-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(3, GPOUT_LOW,
+ GPOEN_SYS_I2C2_CLK,
+ GPI_SYS_I2C2_CLK)>,
+ <GPIOMUX(2, GPOUT_LOW,
+ GPOEN_SYS_I2C2_DATA,
+ GPI_SYS_I2C2_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c5_pins: i2c5-0 {
+ bootph-pre-ram;
+
+ i2c-pins {
+ pinmux = <GPIOMUX(19, GPOUT_LOW,
+ GPOEN_SYS_I2C5_CLK,
+ GPI_SYS_I2C5_CLK)>,
+ <GPIOMUX(20, GPOUT_LOW,
+ GPOEN_SYS_I2C5_DATA,
+ GPI_SYS_I2C5_DATA)>;
+ bias-disable; /* external pull-up */
+ bootph-pre-ram;
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c6_pins: i2c6-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(16, GPOUT_LOW,
+ GPOEN_SYS_I2C6_CLK,
+ GPI_SYS_I2C6_CLK)>,
+ <GPIOMUX(17, GPOUT_LOW,
+ GPOEN_SYS_I2C6_DATA,
+ GPI_SYS_I2C6_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ mmc0_pins: mmc0-0 {
+ mmc-pins {
+ pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
+ <PINMUX(PAD_SD0_CMD, 0)>,
+ <PINMUX(PAD_SD0_DATA0, 0)>,
+ <PINMUX(PAD_SD0_DATA1, 0)>,
+ <PINMUX(PAD_SD0_DATA2, 0)>,
+ <PINMUX(PAD_SD0_DATA3, 0)>,
+ <PINMUX(PAD_SD0_DATA4, 0)>,
+ <PINMUX(PAD_SD0_DATA5, 0)>,
+ <PINMUX(PAD_SD0_DATA6, 0)>,
+ <PINMUX(PAD_SD0_DATA7, 0)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-enable;
+ };
+ };
+
+ mmc1_pins: mmc1-0 {
+ clk-pins {
+ pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ mmc-pins {
+ pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
+ GPOEN_SYS_SDIO1_CMD,
+ GPI_SYS_SDIO1_CMD)>,
+ <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
+ GPOEN_SYS_SDIO1_DATA0,
+ GPI_SYS_SDIO1_DATA0)>,
+ <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
+ GPOEN_SYS_SDIO1_DATA1,
+ GPI_SYS_SDIO1_DATA1)>,
+ <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
+ GPOEN_SYS_SDIO1_DATA2,
+ GPI_SYS_SDIO1_DATA2)>,
+ <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
+ GPOEN_SYS_SDIO1_DATA3,
+ GPI_SYS_SDIO1_DATA3)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie0_pins: pcie0-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(27, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(32, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_pins: pcie1-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(29, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(21, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pwmdac_pins: pwmdac-0 {
+ pwmdac-pins {
+ pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
+ GPOEN_ENABLE,
+ GPI_NONE)>,
+ <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm_pins: pwm-0 {
+ pwm-pins {
+ pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+ GPOEN_SYS_PWM0_CHANNEL0,
+ GPI_NONE)>,
+ <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+ GPOEN_SYS_PWM0_CHANNEL1,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ spi0_pins: spi0-0 {
+ mosi-pins {
+ pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ miso-pins {
+ pinmux = <GPIOMUX(53, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_SPI0_RXD)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+
+ sck-pins {
+ pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
+ GPOEN_ENABLE,
+ GPI_SYS_SPI0_CLK)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ ss-pins {
+ pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
+ GPOEN_ENABLE,
+ GPI_SYS_SPI0_FSS)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ };
+
+ uart0_pins: uart0-0 {
+ tx-pins {
+ pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pinmux = <GPIOMUX(6, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART0_RX)>;
+ bias-disable; /* external pull-up */
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+};
+
+&uart0 {
+ bootph-pre-ram;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&U74_1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+ cpu-supply = <&vdd_cpu>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh711x.dtsi b/arch/riscv/boot/dts/starfive/jh711x.dtsi
index 6e56e9d20bb0..a380d3dabedd 100644
--- a/arch/riscv/boot/dts/starfive/jh711x.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh711x.dtsi
@@ -205,22 +205,6 @@ core4 {
cpu_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
- opp-375000000 {
- opp-hz = /bits/ 64 <375000000>;
- opp-microvolt = <800000>;
- };
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <800000>;
- };
- opp-750000000 {
- opp-hz = /bits/ 64 <750000000>;
- opp-microvolt = <800000>;
- };
- opp-1500000000 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1040000>;
- };
};
thermal-zones {
--
2.43.2
Powered by blists - more mailing lists