lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5b7c7ecc-38db-483b-87fc-4199a8bd52c3@freeshell.de>
Date: Fri, 7 Nov 2025 03:24:24 -0800
From: E Shattow <e@...eshell.de>
To: Hal Feng <hal.feng@...rfivetech.com>, Conor Dooley <conor+dt@...nel.org>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Palmer Dabbelt <palmer@...belt.com>, Paul Walmsley <pjw@...nel.org>,
 Albert Ou <aou@...s.berkeley.edu>, "Rafael J . Wysocki" <rafael@...nel.org>,
 Viresh Kumar <viresh.kumar@...aro.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
 Lorenzo Pieralisi <lpieralisi@...nel.org>,
 Krzysztof WilczyƄski <kwilczynski@...nel.org>,
 Manivannan Sadhasivam <mani@...nel.org>,
 Emil Renner Berthing <emil.renner.berthing@...onical.com>,
 Heinrich Schuchardt <heinrich.schuchardt@...onical.com>
Cc: devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 5/8] riscv: dts: starfive: jh711x-common: Move out some
 nodes to jh7110 common dtsi



On 11/7/25 01:55, Hal Feng wrote:
> Some nodes in this file are not used by the upcoming VisionFive 2 Lite
> board. Move them to the jh7110 common dtsi to prepare for adding the
> new VisionFive 2 Lite device tree.
> 
> Signed-off-by: Hal Feng <hal.feng@...rfivetech.com>
> ---
>  arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 14 ++++++++++++++
>  arch/riscv/boot/dts/starfive/jh711x-common.dtsi |  8 --------
>  2 files changed, 14 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index dd5805ef70a1..cdc362b8d58b 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -25,3 +25,17 @@ opp-1500000000 {
>  		opp-microvolt = <1040000>;
>  	};
>  };
> +
> +&mmc0 {
> +	cap-mmc-highspeed;
> +	cap-mmc-hw-reset;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	vmmc-supply = <&vcc_3v3>;
> +	vqmmc-supply = <&emmc_vdd>;
> +};
> +
> +&mmc1 {
> +	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +};
> diff --git a/arch/riscv/boot/dts/starfive/jh711x-common.dtsi b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
> index 809274625615..42b8f60725fb 100644
> --- a/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh711x-common.dtsi
> @@ -281,14 +281,8 @@ &mmc0 {
>  	assigned-clock-rates = <50000000>;
>  	bus-width = <8>;
>  	bootph-pre-ram;
> -	cap-mmc-highspeed;
> -	mmc-ddr-1_8v;
> -	mmc-hs200-1_8v;
> -	cap-mmc-hw-reset;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&mmc0_pins>;
> -	vmmc-supply = <&vcc_3v3>;
> -	vqmmc-supply = <&emmc_vdd>;
>  	status = "okay";
>  };
>  
> @@ -298,8 +292,6 @@ &mmc1 {
>  	assigned-clock-rates = <50000000>;
>  	bus-width = <4>;
>  	bootph-pre-ram;
> -	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
> -	disable-wp;
>  	cap-sd-highspeed;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&mmc1_pins>;

Reviewed-by: E Shattow <e@...eshell.de>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ