Message-ID: <61680de1-6732-48a6-a871-9cc9f17f6759@redhat.com>
Date: Mon, 10 Nov 2025 09:13:07 +1000
From: Gavin Shan <gshan@...hat.com>
To: Ben Horgan <ben.horgan@....com>, james.morse@....com
Cc: amitsinght@...vell.com, baisheng.gao@...soc.com,
 baolin.wang@...ux.alibaba.com, bobo.shaobowang@...wei.com,
 carl@...amperecomputing.com, catalin.marinas@....com, dakr@...nel.org,
 dave.martin@....com, david@...hat.com, dfustini@...libre.com,
 fenghuay@...dia.com, gregkh@...uxfoundation.org, guohanjun@...wei.com,
 jeremy.linton@....com, jonathan.cameron@...wei.com, kobak@...dia.com,
 lcherian@...vell.com, lenb@...nel.org, linux-acpi@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
 lpieralisi@...nel.org, peternewman@...gle.com, quic_jiles@...cinc.com,
 rafael@...nel.org, robh@...nel.org, rohit.mathew@....com,
 scott@...amperecomputing.com, sdonthineni@...dia.com, sudeep.holla@....com,
 tan.shaopeng@...itsu.com, will@...nel.org, xhao@...ux.alibaba.com,
 Shaopeng Tan <tan.shaopeng@...fujitsu.com>
Subject: Re: [PATCH 26/33] arm_mpam: Add mpam_msmon_read() to read monitor
 value

Hi Ben,

On 11/7/25 10:34 PM, Ben Horgan wrote:
> From: James Morse <james.morse@....com>
> 
> Reading a monitor involves configuring what you want to monitor, and
> reading the value. Components made up of multiple MSC may need values
> from each MSC. MSCs may take time to configure, returning 'not ready'.
> The maximum 'not ready' time should have been provided by firmware.
> 
> Add mpam_msmon_read() to hide all this. If (one of) the MSC returns
> not ready, then wait the full timeout value before trying again.
> 
> CC: Shanker Donthineni <sdonthineni@...dia.com>
> Cc: Shaopeng Tan (Fujitsu) <tan.shaopeng@...itsu.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@...wei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@...fujitsu.com>
> Tested-by: Peter Newman <peternewman@...gle.com>
> Signed-off-by: James Morse <james.morse@....com>
> Signed-off-by: Ben Horgan <ben.horgan@....com>
> ---
> Changes since v3:
> Add tag - thanks
> Bring config_mismatch into this commit (Jonathan)
> whitespace
> ---
>   drivers/resctrl/mpam_devices.c  | 237 ++++++++++++++++++++++++++++++++
>   drivers/resctrl/mpam_internal.h |  19 +++
>   2 files changed, 256 insertions(+)
> 

With below minor comments addressed:

Reviewed-by: Gavin Shan <gshan@...hat.com>

> diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
> index f51ffb1400db..86abbac5e1ad 100644
> --- a/drivers/resctrl/mpam_devices.c
> +++ b/drivers/resctrl/mpam_devices.c
> @@ -886,6 +886,243 @@ static int mpam_msc_hw_probe(struct mpam_msc *msc)
>   	return 0;
>   }
>   
> +struct mon_read {
> +	struct mpam_msc_ris		*ris;
> +	struct mon_cfg			*ctx;
> +	enum mpam_device_features	type;
> +	u64				*val;
> +	int				err;
> +};
> +
> +static void gen_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
> +				   u32 *flt_val)
> +{
> +	struct mon_cfg *ctx = m->ctx;
> +
> +	/*
> +	 * For CSU counters its implementation-defined what happens when not
> +	 * filtering by partid.
> +	 */
> +	*ctl_val = MSMON_CFG_x_CTL_MATCH_PARTID;
> +
> +	*flt_val = FIELD_PREP(MSMON_CFG_x_FLT_PARTID, ctx->partid);
> +
> +	if (m->ctx->match_pmg) {
> +		*ctl_val |= MSMON_CFG_x_CTL_MATCH_PMG;
> +		*flt_val |= FIELD_PREP(MSMON_CFG_x_FLT_PMG, ctx->pmg);
> +	}
> +
> +	switch (m->type) {
> +	case mpam_feat_msmon_csu:
> +		*ctl_val |= MSMON_CFG_CSU_CTL_TYPE_CSU;
> +
> +		if (mpam_has_feature(mpam_feat_msmon_csu_xcl, &m->ris->props))
> +			*flt_val |= FIELD_PREP(MSMON_CFG_CSU_FLT_XCL,
> +					       ctx->csu_exclude_clean);

{} missed here.

> +
> +		break;
> +	case mpam_feat_msmon_mbwu:
> +		*ctl_val |= MSMON_CFG_MBWU_CTL_TYPE_MBWU;
> +
> +		if (mpam_has_feature(mpam_feat_msmon_mbwu_rwbw, &m->ris->props))
> +			*flt_val |= FIELD_PREP(MSMON_CFG_MBWU_FLT_RWBW, ctx->opts);
> +
> +		break;
> +	default:
> +		return;

s/return/break

We may add a error message here:

		pr_warn("Unsupported feature %d\n", m->type);
		

> +	}
> +}
> +
> +static void read_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
> +				    u32 *flt_val)
> +{
> +	struct mpam_msc *msc = m->ris->vmsc->msc;
> +
> +	switch (m->type) {
> +	case mpam_feat_msmon_csu:
> +		*ctl_val = mpam_read_monsel_reg(msc, CFG_CSU_CTL);
> +		*flt_val = mpam_read_monsel_reg(msc, CFG_CSU_FLT);
> +		return;
> +	case mpam_feat_msmon_mbwu:
> +		*ctl_val = mpam_read_monsel_reg(msc, CFG_MBWU_CTL);
> +		*flt_val = mpam_read_monsel_reg(msc, CFG_MBWU_FLT);
> +		return;
> +	default:
> +		return;
> +	}
> +}

s/return/break for all cases, and maybe a warning message for the
default case.

> +
> +/* Remove values set by the hardware to prevent apparent mismatches. */
> +static void clean_msmon_ctl_val(u32 *cur_ctl)
> +{
> +	*cur_ctl &= ~MSMON_CFG_x_CTL_OFLOW_STATUS;
> +}
> +

May be worthy be to a inline function.

> +static void write_msmon_ctl_flt_vals(struct mon_read *m, u32 ctl_val,
> +				     u32 flt_val)
> +{
> +	struct mpam_msc *msc = m->ris->vmsc->msc;
> +
> +	/*
> +	 * Write the ctl_val with the enable bit cleared, reset the counter,
> +	 * then enable counter.
> +	 */
> +	switch (m->type) {
> +	case mpam_feat_msmon_csu:
> +		mpam_write_monsel_reg(msc, CFG_CSU_FLT, flt_val);
> +		mpam_write_monsel_reg(msc, CFG_CSU_CTL, ctl_val);
> +		mpam_write_monsel_reg(msc, CSU, 0);
> +		mpam_write_monsel_reg(msc, CFG_CSU_CTL, ctl_val | MSMON_CFG_x_CTL_EN);
> +		break;
> +	case mpam_feat_msmon_mbwu:
> +		mpam_write_monsel_reg(msc, CFG_MBWU_FLT, flt_val);
> +		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, ctl_val);
> +		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, ctl_val | MSMON_CFG_x_CTL_EN);
> +		/* Counting monitors require NRDY to be reset by software */
> +		mpam_write_monsel_reg(msc, MBWU, 0);
> +		break;
> +	default:
> +		return;

s/return/break, and maybe a warning message for the default case.

> +	}
> +}
> +
> +static void __ris_msmon_read(void *arg)
> +{
> +	u64 now;
> +	bool nrdy = false;
> +	bool config_mismatch;
> +	struct mon_read *m = arg;
> +	struct mon_cfg *ctx = m->ctx;
> +	struct mpam_msc_ris *ris = m->ris;
> +	struct mpam_props *rprops = &ris->props;
> +	struct mpam_msc *msc = m->ris->vmsc->msc;
> +	u32 mon_sel, ctl_val, flt_val, cur_ctl, cur_flt;
> +
> +	if (!mpam_mon_sel_lock(msc)) {
> +		m->err = -EIO;
> +		return;
> +	}
> +	mon_sel = FIELD_PREP(MSMON_CFG_MON_SEL_MON_SEL, ctx->mon) |
> +		  FIELD_PREP(MSMON_CFG_MON_SEL_RIS, ris->ris_idx);
> +	mpam_write_monsel_reg(msc, CFG_MON_SEL, mon_sel);
> +
> +	/*
> +	 * Read the existing configuration to avoid re-writing the same values.
> +	 * This saves waiting for 'nrdy' on subsequent reads.
> +	 */
> +	read_msmon_ctl_flt_vals(m, &cur_ctl, &cur_flt);
> +	clean_msmon_ctl_val(&cur_ctl);
> +	gen_msmon_ctl_flt_vals(m, &ctl_val, &flt_val);
> +	config_mismatch = cur_flt != flt_val ||
> +			  cur_ctl != (ctl_val | MSMON_CFG_x_CTL_EN);
> +
> +	if (config_mismatch)
> +		write_msmon_ctl_flt_vals(m, ctl_val, flt_val);
> +
> +	switch (m->type) {
> +	case mpam_feat_msmon_csu:
> +		now = mpam_read_monsel_reg(msc, CSU);
> +		if (mpam_has_feature(mpam_feat_msmon_csu_hw_nrdy, rprops))
> +			nrdy = now & MSMON___NRDY;
> +		break;
> +	case mpam_feat_msmon_mbwu:
> +		now = mpam_read_monsel_reg(msc, MBWU);
> +		if (mpam_has_feature(mpam_feat_msmon_mbwu_hw_nrdy, rprops))
> +			nrdy = now & MSMON___NRDY;
> +		break;
> +	default:
> +		m->err = -EINVAL;
> +		break;

This 'break' can be droped.

> +	}
> +	mpam_mon_sel_unlock(msc);
> +
> +	if (nrdy) {
> +		m->err = -EBUSY;
> +		return;
> +	}
> +
> +	now = FIELD_GET(MSMON___VALUE, now);
> +	*m->val += now;
> +}
> +
> +static int _msmon_read(struct mpam_component *comp, struct mon_read *arg)
> +{
> +	int err, any_err = 0;
> +	struct mpam_vmsc *vmsc;
> +
> +	guard(srcu)(&mpam_srcu);
> +	list_for_each_entry_srcu(vmsc, &comp->vmsc, comp_list,
> +				 srcu_read_lock_held(&mpam_srcu)) {
> +		struct mpam_msc *msc = vmsc->msc;
> +		struct mpam_msc_ris *ris;
> +
> +		list_for_each_entry_srcu(ris, &vmsc->ris, vmsc_list,
> +					 srcu_read_lock_held(&mpam_srcu)) {
> +			arg->ris = ris;
> +
> +			err = smp_call_function_any(&msc->accessibility,
> +						    __ris_msmon_read, arg,
> +						    true);
> +			if (!err && arg->err)
> +				err = arg->err;
> +
> +			/*
> +			 * Save one error to be returned to the caller, but
> +			 * keep reading counters so that get reprogrammed. On
> +			 * platforms with NRDY this lets us wait once.
> +			 */
> +			if (err)
> +				any_err = err;
> +		}
> +	}
> +
> +	return any_err;
> +}
> +
> +int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
> +		    enum mpam_device_features type, u64 *val)
> +{
> +	int err;
> +	struct mon_read arg;
> +	u64 wait_jiffies = 0;
> +	struct mpam_props *cprops = &comp->class->props;
> +
> +	might_sleep();
> +
> +	if (!mpam_is_enabled())
> +		return -EIO;
> +
> +	if (!mpam_has_feature(type, cprops))
> +		return -EOPNOTSUPP;
> +
> +	arg = (struct mon_read) {
> +		.ctx = ctx,
> +		.type = type,
> +		.val = val,
> +	};
> +	*val = 0;
> +
> +	err = _msmon_read(comp, &arg);
> +	if (err == -EBUSY && comp->class->nrdy_usec)
> +		wait_jiffies = usecs_to_jiffies(comp->class->nrdy_usec);
> +
> +	while (wait_jiffies)
> +		wait_jiffies = schedule_timeout_uninterruptible(wait_jiffies);
> +
> +	if (err == -EBUSY) {
> +		arg = (struct mon_read) {
> +			.ctx = ctx,
> +			.type = type,
> +			.val = val,
> +		};
> +		*val = 0;
> +
> +		err = _msmon_read(comp, &arg);
> +	}
> +
> +	return err;
> +}
> +
>   static void mpam_reset_msc_bitmap(struct mpam_msc *msc, u16 reg, u16 wd)
>   {
>   	u32 num_words, msb;
> diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
> index e59c0f4d9ada..d8f8e29987e0 100644
> --- a/drivers/resctrl/mpam_internal.h
> +++ b/drivers/resctrl/mpam_internal.h
> @@ -184,6 +184,22 @@ struct mpam_props {
>   #define mpam_set_feature(_feat, x)	set_bit(_feat, (x)->features)
>   #define mpam_clear_feature(_feat, x)	clear_bit(_feat, (x)->features)
>   
> +/* The values for MSMON_CFG_MBWU_FLT.RWBW */
> +enum mon_filter_options {
> +	COUNT_BOTH	= 0,
> +	COUNT_WRITE	= 1,
> +	COUNT_READ	= 2,
> +};
> +
> +struct mon_cfg {
> +	u16			mon;
> +	u8			pmg;
> +	bool			match_pmg;
> +	bool			csu_exclude_clean;
> +	u32			partid;
> +	enum mon_filter_options opts;
> +};
> +
>   struct mpam_class {
>   	/* mpam_components in this class */
>   	struct list_head	components;
> @@ -327,6 +343,9 @@ void mpam_disable(struct work_struct *work);
>   int mpam_apply_config(struct mpam_component *comp, u16 partid,
>   		      struct mpam_config *cfg);
>   
> +int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
> +		    enum mpam_device_features, u64 *val);
> +
>   int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
>   				   cpumask_t *affinity);
>   
Thanks,
Gavin

Powered by blists - more mailing lists