[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <4487DA40249CC821+19232169-a096-4737-bc6a-5cec9592d65f@radxa.com>
Date: Mon, 10 Nov 2025 13:56:03 +0900
From: FUKAUMI Naoki <naoki@...xa.com>
To: Shawn Lin <shawn.lin@...k-chips.com>
Cc: Damien Le Moal <dlemoal@...nel.org>, Anand Moon <linux.amoon@...il.com>,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Dragan Simic <dsimic@...jaro.org>, Lorenzo Pieralisi
<lpieralisi@...nel.org>, Krzysztof Wilczyński
<kw@...ux.com>, Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>, Heiko Stuebner <heiko@...ech.de>,
mani@...nel.org, Niklas Cassel <cassel@...nel.org>
Subject: Re: [RESEND] Re: [PATCH] PCI: dw-rockchip: Skip waiting for link up
Hi Shawn,
On 11/10/25 11:30, Shawn Lin wrote:
> Hi Fukaumi
>
> 在 2025/11/10 星期一 7:26, FUKAUMI Naoki 写道:
>> (RESEND: fix mani's email address)
>>
>> Hi Niklas,
>>
>> On 11/9/25 21:28, Niklas Cassel wrote:
>>> On Sun, Nov 09, 2025 at 01:42:23PM +0900, FUKAUMI Naoki wrote:
>>>> Hi Niklas,
>>>>
>>>> On 11/8/25 22:27, Niklas Cassel wrote:
>>>> (snip)> (And btw. please test with the latest 6.18-rc, as, from
>>>> experience,
>>>> the
>>>>> ASPM problems in earlier RCs can result in some weird problems that
>>>>> are
>>>>> not immediately deduced to be caused by the ASPM enablement.)
>>>>
>>>> Here is dmesg from v6.18-rc4:
>>>> https://gist.github.com/RadxaNaoki/40e1d049bff4f1d2d4773a5ba0ed9dff
>>>
>>> Same problem as before:
>>> [ 1.732538] pci_bus 0004:43: busn_res: can not insert [bus 43-41]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.732645] pci_bus 0004:43: busn_res: [bus 43-41] end is updated
>>> to 43
>>> [ 1.732651] pci_bus 0004:43: busn_res: can not insert [bus 43]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.732661] pci 0004:42:00.0: devices behind bridge are unusable
>>> because [bus 43] cannot be assigned for them
>>> [ 1.732840] pci_bus 0004:44: busn_res: can not insert [bus 44-41]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.732947] pci_bus 0004:44: busn_res: [bus 44-41] end is updated
>>> to 44
>>> [ 1.732952] pci_bus 0004:44: busn_res: can not insert [bus 44]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.732962] pci 0004:42:02.0: devices behind bridge are unusable
>>> because [bus 44] cannot be assigned for them
>>> [ 1.733134] pci_bus 0004:45: busn_res: can not insert [bus 45-41]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.733246] pci_bus 0004:45: busn_res: [bus 45-41] end is updated
>>> to 45
>>> [ 1.733255] pci_bus 0004:45: busn_res: can not insert [bus 45]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.733266] pci 0004:42:06.0: devices behind bridge are unusable
>>> because [bus 45] cannot be assigned for them
>>> [ 1.733438] pci_bus 0004:46: busn_res: can not insert [bus 46-41]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.733544] pci_bus 0004:46: busn_res: [bus 46-41] end is updated
>>> to 46
>>> [ 1.733550] pci_bus 0004:46: busn_res: can not insert [bus 46]
>>> under [bus 42-41] (conflicts with (null) [bus 42-41])
>>> [ 1.733560] pci 0004:42:0e.0: devices behind bridge are unusable
>>> because [bus 46] cannot be assigned for them
>>> [ 1.733571] pci_bus 0004:42: busn_res: [bus 42-41] end is updated
>>> to 46
>>> [ 1.733575] pci_bus 0004:42: busn_res: can not insert [bus 42-46]
>>> under [bus 41] (conflicts with (null) [bus 41])
>>> [ 1.733585] pci 0004:41:00.0: devices behind bridge are unusable
>>> because [bus 42-46] cannot be assigned for them
>>> [ 1.733596] pcieport 0004:40:00.0: bridge has subordinate 41 but
>>> max busn 46
>>>
>>>
>>> Seems like the ASM2806 switch, for some reason, is not ready.
>>>
>>> One change that Diederik pointed out is that in the "good" case,
>>> the link is always in Gen1 speed.
>>>
>>> Perhaps you could build with CONFIG_PCI_QUIRKS=y and try this patch:
>>>
>>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>>> index 214ed060ca1b..ac134d95a97f 100644
>>> --- a/drivers/pci/quirks.c
>>> +++ b/drivers/pci/quirks.c
>>> @@ -96,6 +96,7 @@ int pcie_failed_link_retrain(struct pci_dev *dev)
>>> {
>>> static const struct pci_device_id ids[] = {
>>> { PCI_VDEVICE(ASMEDIA, 0x2824) }, /* ASMedia ASM2824 */
>>> + { PCI_VDEVICE(ASMEDIA, 0x2806) }, /* ASMedia ASM2806 */
>>> {}
>>> };
>>> u16 lnksta, lnkctl2;
>>
>> It doesn't help with either probing behind the bridge or the link speed.
>>
>>> If that does not work, perhaps you could try this patch
>>> (assuming that all Rock 5C:s have a ASM2806 on pcie2x1l2):
>>
>> ROCK 5C has a PCIe FPC connector and I'm using Dual 2.5G Router HAT.
>> https://radxa.com/products/rock5/5c#techspec
>> https://radxa.com/products/accessories/dual-2-5g-router-hat
>>
>> Regarding the link speed, I initially suspected the FPC connector and/
>> or cable might be the issue. However, I tried the Dual 2.5G Router HAT
>> with the ROCK 5A (which uses a different cable), and I got the same
>> result.
>>
>> BTW, the link speed varies between 2Gb/s and 4Gb/s depending on the
>> reboot. (with or without quirk)
>
> Could you please help check this patch?
I tried your patch on top of vanilla v6.18-rc5.
https://gist.github.com/RadxaNaoki/b42252ce3209d9f6bc2d4c90c71956ae
I got 2 oops,
- its_msi_teardown+0x120/0x140
New with this patch.
- of_pci_add_properties+0x284/0x4c4
It sometimes happen with vanilla v6.18-rcX.
Nothing behind the bridge is probed.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
> --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> @@ -454,6 +454,8 @@ static irqreturn_t
> rockchip_pcie_rc_sys_irq_thread(int irq, void *arg)
> struct dw_pcie *pci = &rockchip->pci;
> struct dw_pcie_rp *pp = &pci->pp;
> struct device *dev = pci->dev;
> + struct pci_bus *child, *root_bus = NULL;
> + struct pci_dev *bridge;
> u32 reg;
>
> reg = rockchip_pcie_readl_apb(rockchip,
> PCIE_CLIENT_INTR_STATUS_MISC);
> @@ -462,12 +464,21 @@ static irqreturn_t
> rockchip_pcie_rc_sys_irq_thread(int irq, void *arg)
> dev_dbg(dev, "PCIE_CLIENT_INTR_STATUS_MISC: %#x\n", reg);
> dev_dbg(dev, "LTSSM_STATUS: %#x\n",
> rockchip_pcie_get_ltssm(rockchip));
>
> + list_for_each_entry(child, &pp->bridge->bus->children, node) {
> + if (child->parent == pp->bridge->bus) {
> + root_bus = child;
> + bridge = root_bus->self;
> + break;
> + }
> + }
> +
> if (reg & PCIE_RDLH_LINK_UP_CHGED) {
> if (rockchip_pcie_link_up(pci)) {
> msleep(PCIE_RESET_CONFIG_WAIT_MS);
> dev_dbg(dev, "Received Link up event. Starting
> enumeration!\n");
> /* Rescan the bus to enumerate endpoint devices */
> pci_lock_rescan_remove();
> + pci_stop_and_remove_bus_device(bridge);
> pci_rescan_bus(pp->bridge->bus);
> pci_unlock_rescan_remove();
> }
>
>
>>
>> Best regards,
>>
>> --
>> FUKAUMI Naoki
>> Radxa Computer (Shenzhen) Co., Ltd.
>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/
>>> arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
>>> index dd7317bab613..26f8539d934a 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
>>> @@ -452,6 +452,7 @@ &pcie2x1l2 {
>>> pinctrl-0 = <&pcie20x1_2_perstn_m0>;
>>> reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
>>> vpcie3v3-supply = <&pcie2x1l2_3v3>;
>>> + max-link-speed = <1>;
>>> status = "okay";
>>> };
>>>
>>>
>>>
>>> Kind regards,
>>> Niklas
>>>
>>
>>
>
>
Powered by blists - more mailing lists