| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251110175818.1571610-3-ivecera@redhat.com>
Date: Mon, 10 Nov 2025 18:58:14 +0100
From: Ivan Vecera <ivecera@...hat.com>
To: netdev@...r.kernel.org
Cc: Petr Oros <poros@...hat.com>,
Prathosh Satish <Prathosh.Satish@...rochip.com>,
Vadim Fedorenko <vadim.fedorenko@...ux.dev>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
Jiri Pirko <jiri@...nulli.us>,
Michal Schmidt <mschmidt@...hat.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH net-next 2/6] dpll: zl3073x: Split ref, out, and synth logic from core
Refactor the zl3073x driver by splitting the logic for input
references, outputs and synthesizers out of the monolithic
core.[ch] files.
Move the logic for each functional block into its own dedicated files:
ref.[ch], out.[ch] and synth.[ch].
Specifically:
- Move state structures (zl3073x_ref, zl3073x_out, zl3073x_synth)
from core.h into their respective new headers
- Move state-fetching functions (..._state_fetch) from core.c to their
new .c files
- Move the zl3073x_ref_freq_factorize helper from core.c to ref.c
- Introduce a new helper layer to decouple the core device logic from
the state-parsing logic:
1. Move the original inline helpers (e.g., zl3073x_ref_is_enabled)
to the new headers (ref.h, etc.) and make them operate on a
const struct ... * pointer.
2. Create new zl3073x_dev_... prefixed functions in core.h
(e.g., zl3073x_dev_ref_is_enabled) and Implement these _dev_ functions
to fetch state using a new ..._state_get() helper and then call
the non-prefixed helper.
3. Update all driver-internal callers (in dpll.c, prop.c, etc.) to use
the new zl3073x_dev_... functions.
Reviewed-by: Petr Oros <poros@...hat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@...rochip.com>
Signed-off-by: Ivan Vecera <ivecera@...hat.com>
---
drivers/dpll/zl3073x/Makefile | 3 +-
drivers/dpll/zl3073x/core.c | 194 ----------------------------------
drivers/dpll/zl3073x/core.h | 170 +++++++++++++----------------
drivers/dpll/zl3073x/dpll.c | 36 +++----
drivers/dpll/zl3073x/out.c | 67 ++++++++++++
drivers/dpll/zl3073x/out.h | 80 ++++++++++++++
drivers/dpll/zl3073x/prop.c | 12 +--
drivers/dpll/zl3073x/ref.c | 109 +++++++++++++++++++
drivers/dpll/zl3073x/ref.h | 66 ++++++++++++
drivers/dpll/zl3073x/synth.c | 87 +++++++++++++++
drivers/dpll/zl3073x/synth.h | 73 +++++++++++++
11 files changed, 582 insertions(+), 315 deletions(-)
create mode 100644 drivers/dpll/zl3073x/out.c
create mode 100644 drivers/dpll/zl3073x/out.h
create mode 100644 drivers/dpll/zl3073x/ref.c
create mode 100644 drivers/dpll/zl3073x/ref.h
create mode 100644 drivers/dpll/zl3073x/synth.c
create mode 100644 drivers/dpll/zl3073x/synth.h
diff --git a/drivers/dpll/zl3073x/Makefile b/drivers/dpll/zl3073x/Makefile
index 84e22aae57e5f..bd324c7fe7101 100644
--- a/drivers/dpll/zl3073x/Makefile
+++ b/drivers/dpll/zl3073x/Makefile
@@ -1,7 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_ZL3073X) += zl3073x.o
-zl3073x-objs := core.o devlink.o dpll.o flash.o fw.o prop.o
+zl3073x-objs := core.o devlink.o dpll.o flash.o fw.o \
+ out.o prop.o ref.o synth.o
obj-$(CONFIG_ZL3073X_I2C) += zl3073x_i2c.o
zl3073x_i2c-objs := i2c.o
diff --git a/drivers/dpll/zl3073x/core.c b/drivers/dpll/zl3073x/core.c
index 50c1fe59bc7f0..2f340f7eb9ec3 100644
--- a/drivers/dpll/zl3073x/core.c
+++ b/drivers/dpll/zl3073x/core.c
@@ -129,47 +129,6 @@ const struct regmap_config zl3073x_regmap_config = {
};
EXPORT_SYMBOL_NS_GPL(zl3073x_regmap_config, "ZL3073X");
-/**
- * zl3073x_ref_freq_factorize - factorize given frequency
- * @freq: input frequency
- * @base: base frequency
- * @mult: multiplier
- *
- * Checks if the given frequency can be factorized using one of the
- * supported base frequencies. If so the base frequency and multiplier
- * are stored into appropriate parameters if they are not NULL.
- *
- * Return: 0 on success, -EINVAL if the frequency cannot be factorized
- */
-int
-zl3073x_ref_freq_factorize(u32 freq, u16 *base, u16 *mult)
-{
- static const u16 base_freqs[] = {
- 1, 2, 4, 5, 8, 10, 16, 20, 25, 32, 40, 50, 64, 80, 100, 125,
- 128, 160, 200, 250, 256, 320, 400, 500, 625, 640, 800, 1000,
- 1250, 1280, 1600, 2000, 2500, 3125, 3200, 4000, 5000, 6250,
- 6400, 8000, 10000, 12500, 15625, 16000, 20000, 25000, 31250,
- 32000, 40000, 50000, 62500,
- };
- u32 div;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(base_freqs); i++) {
- div = freq / base_freqs[i];
-
- if (div <= U16_MAX && (freq % base_freqs[i]) == 0) {
- if (base)
- *base = base_freqs[i];
- if (mult)
- *mult = div;
-
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
static bool
zl3073x_check_reg(struct zl3073x_dev *zldev, unsigned int reg, size_t size)
{
@@ -593,159 +552,6 @@ int zl3073x_write_hwreg_seq(struct zl3073x_dev *zldev,
return rc;
}
-/**
- * zl3073x_ref_state_fetch - get input reference state
- * @zldev: pointer to zl3073x_dev structure
- * @index: input reference index to fetch state for
- *
- * Function fetches state for the given input reference and stores it for
- * later user.
- *
- * Return: 0 on success, <0 on error
- */
-static int
-zl3073x_ref_state_fetch(struct zl3073x_dev *zldev, u8 index)
-{
- struct zl3073x_ref *ref = &zldev->ref[index];
- int rc;
-
- /* If the input is differential then the configuration for N-pin
- * reference is ignored and P-pin config is used for both.
- */
- if (zl3073x_is_n_pin(index) && zl3073x_ref_is_diff(zldev, index - 1)) {
- memcpy(ref, &zldev->ref[index - 1], sizeof(*ref));
-
- return 0;
- }
-
- guard(mutex)(&zldev->multiop_lock);
-
- /* Read reference configuration */
- rc = zl3073x_mb_op(zldev, ZL_REG_REF_MB_SEM, ZL_REF_MB_SEM_RD,
- ZL_REG_REF_MB_MASK, BIT(index));
- if (rc)
- return rc;
-
- /* Read ref_config register */
- rc = zl3073x_read_u8(zldev, ZL_REG_REF_CONFIG, &ref->config);
- if (rc)
- return rc;
-
- dev_dbg(zldev->dev, "REF%u is %s and configured as %s\n", index,
- str_enabled_disabled(zl3073x_ref_is_enabled(zldev, index)),
- zl3073x_ref_is_diff(zldev, index)
- ? "differential" : "single-ended");
-
- return rc;
-}
-
-/**
- * zl3073x_out_state_fetch - get output state
- * @zldev: pointer to zl3073x_dev structure
- * @index: output index to fetch state for
- *
- * Function fetches state of the given output (not output pin) and stores it
- * for later use.
- *
- * Return: 0 on success, <0 on error
- */
-static int
-zl3073x_out_state_fetch(struct zl3073x_dev *zldev, u8 index)
-{
- struct zl3073x_out *out = &zldev->out[index];
- int rc;
-
- /* Read output configuration */
- rc = zl3073x_read_u8(zldev, ZL_REG_OUTPUT_CTRL(index), &out->ctrl);
- if (rc)
- return rc;
-
- dev_dbg(zldev->dev, "OUT%u is %s and connected to SYNTH%u\n", index,
- str_enabled_disabled(zl3073x_out_is_enabled(zldev, index)),
- zl3073x_out_synth_get(zldev, index));
-
- guard(mutex)(&zldev->multiop_lock);
-
- /* Read output configuration */
- rc = zl3073x_mb_op(zldev, ZL_REG_OUTPUT_MB_SEM, ZL_OUTPUT_MB_SEM_RD,
- ZL_REG_OUTPUT_MB_MASK, BIT(index));
- if (rc)
- return rc;
-
- /* Read output mode */
- rc = zl3073x_read_u8(zldev, ZL_REG_OUTPUT_MODE, &out->mode);
- if (rc)
- return rc;
-
- dev_dbg(zldev->dev, "OUT%u has signal format 0x%02x\n", index,
- zl3073x_out_signal_format_get(zldev, index));
-
- return rc;
-}
-
-/**
- * zl3073x_synth_state_fetch - get synth state
- * @zldev: pointer to zl3073x_dev structure
- * @index: synth index to fetch state for
- *
- * Function fetches state of the given synthesizer and stores it for later use.
- *
- * Return: 0 on success, <0 on error
- */
-static int
-zl3073x_synth_state_fetch(struct zl3073x_dev *zldev, u8 index)
-{
- struct zl3073x_synth *synth = &zldev->synth[index];
- int rc;
-
- /* Read synth control register */
- rc = zl3073x_read_u8(zldev, ZL_REG_SYNTH_CTRL(index), &synth->ctrl);
- if (rc)
- return rc;
-
- guard(mutex)(&zldev->multiop_lock);
-
- /* Read synth configuration */
- rc = zl3073x_mb_op(zldev, ZL_REG_SYNTH_MB_SEM, ZL_SYNTH_MB_SEM_RD,
- ZL_REG_SYNTH_MB_MASK, BIT(index));
- if (rc)
- return rc;
-
- /* The output frequency is determined by the following formula:
- * base * multiplier * numerator / denominator
- *
- * Read registers with these values
- */
- rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_BASE, &synth->freq_base);
- if (rc)
- return rc;
-
- rc = zl3073x_read_u32(zldev, ZL_REG_SYNTH_FREQ_MULT, &synth->freq_mult);
- if (rc)
- return rc;
-
- rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_M, &synth->freq_m);
- if (rc)
- return rc;
-
- rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_N, &synth->freq_n);
- if (rc)
- return rc;
-
- /* Check denominator for zero to avoid div by 0 */
- if (!synth->freq_n) {
- dev_err(zldev->dev,
- "Zero divisor for SYNTH%u retrieved from device\n",
- index);
- return -EINVAL;
- }
-
- dev_dbg(zldev->dev, "SYNTH%u frequency: %u Hz\n", index,
- zl3073x_synth_freq_get(zldev, index));
-
- return rc;
-}
-
static int
zl3073x_dev_state_fetch(struct zl3073x_dev *zldev)
{
diff --git a/drivers/dpll/zl3073x/core.h b/drivers/dpll/zl3073x/core.h
index 51d0fd6cfabfc..fe779fc77dd09 100644
--- a/drivers/dpll/zl3073x/core.h
+++ b/drivers/dpll/zl3073x/core.h
@@ -9,7 +9,10 @@
#include <linux/mutex.h>
#include <linux/types.h>
+#include "out.h"
+#include "ref.h"
#include "regs.h"
+#include "synth.h"
struct device;
struct regmap;
@@ -27,42 +30,6 @@ struct zl3073x_dpll;
#define ZL3073X_NUM_PINS (ZL3073X_NUM_INPUT_PINS + \
ZL3073X_NUM_OUTPUT_PINS)
-/**
- * struct zl3073x_ref - input reference invariant info
- * @ffo: current fractional frequency offset
- * @config: reference config
- */
-struct zl3073x_ref {
- s64 ffo;
- u8 config;
-};
-
-/**
- * struct zl3073x_out - output invariant info
- * @ctrl: output control
- * @mode: output mode
- */
-struct zl3073x_out {
- u8 ctrl;
- u8 mode;
-};
-
-/**
- * struct zl3073x_synth - synthesizer invariant info
- * @freq_mult: frequency multiplier
- * @freq_base: frequency base
- * @freq_m: frequency numerator
- * @freq_n: frequency denominator
- * @ctrl: synth control
- */
-struct zl3073x_synth {
- u32 freq_mult;
- u16 freq_base;
- u16 freq_m;
- u16 freq_n;
- u8 ctrl;
-};
-
/**
* struct zl3073x_dev - zl3073x device
* @dev: pointer to device
@@ -175,7 +142,6 @@ int zl3073x_write_hwreg_seq(struct zl3073x_dev *zldev,
* Misc operations
*****************/
-int zl3073x_ref_freq_factorize(u32 freq, u16 *base, u16 *mult);
int zl3073x_ref_phase_offsets_update(struct zl3073x_dev *zldev, int channel);
static inline bool
@@ -217,181 +183,188 @@ zl3073x_output_pin_out_get(u8 id)
}
/**
- * zl3073x_ref_ffo_get - get current fractional frequency offset
+ * zl3073x_dev_ref_ffo_get - get current fractional frequency offset
* @zldev: pointer to zl3073x device
* @index: input reference index
*
* Return: the latest measured fractional frequency offset
*/
static inline s64
-zl3073x_ref_ffo_get(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_ref_ffo_get(struct zl3073x_dev *zldev, u8 index)
{
- return zldev->ref[index].ffo;
+ const struct zl3073x_ref *ref = zl3073x_ref_state_get(zldev, index);
+
+ return zl3073x_ref_ffo_get(ref);
}
/**
- * zl3073x_ref_is_diff - check if the given input reference is differential
+ * zl3073x_dev_ref_is_diff - check if the given input reference is differential
* @zldev: pointer to zl3073x device
* @index: input reference index
*
* Return: true if reference is differential, false if reference is single-ended
*/
static inline bool
-zl3073x_ref_is_diff(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_ref_is_diff(struct zl3073x_dev *zldev, u8 index)
{
- if (FIELD_GET(ZL_REF_CONFIG_DIFF_EN, zldev->ref[index].config))
- return true;
+ const struct zl3073x_ref *ref = zl3073x_ref_state_get(zldev, index);
- return false;
+ return zl3073x_ref_is_diff(ref);
}
/**
- * zl3073x_ref_is_enabled - check if the given input reference is enabled
+ * zl3073x_dev_ref_is_enabled - check if the given input reference is enabled
* @zldev: pointer to zl3073x device
* @index: input reference index
*
* Return: true if input refernce is enabled, false otherwise
*/
static inline bool
-zl3073x_ref_is_enabled(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_ref_is_enabled(struct zl3073x_dev *zldev, u8 index)
{
- if (FIELD_GET(ZL_REF_CONFIG_ENABLE, zldev->ref[index].config))
- return true;
+ const struct zl3073x_ref *ref = zl3073x_ref_state_get(zldev, index);
- return false;
+ return zl3073x_ref_is_enabled(ref);
}
/**
- * zl3073x_synth_dpll_get - get DPLL ID the synth is driven by
+ * zl3073x_dev_synth_dpll_get - get DPLL ID the synth is driven by
* @zldev: pointer to zl3073x device
* @index: synth index
*
* Return: ID of DPLL the given synthetizer is driven by
*/
static inline u8
-zl3073x_synth_dpll_get(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_synth_dpll_get(struct zl3073x_dev *zldev, u8 index)
{
- return FIELD_GET(ZL_SYNTH_CTRL_DPLL_SEL, zldev->synth[index].ctrl);
+ const struct zl3073x_synth *synth;
+
+ synth = zl3073x_synth_state_get(zldev, index);
+ return zl3073x_synth_dpll_get(synth);
}
/**
- * zl3073x_synth_freq_get - get synth current freq
+ * zl3073x_dev_synth_freq_get - get synth current freq
* @zldev: pointer to zl3073x device
* @index: synth index
*
* Return: frequency of given synthetizer
*/
static inline u32
-zl3073x_synth_freq_get(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_synth_freq_get(struct zl3073x_dev *zldev, u8 index)
{
- struct zl3073x_synth *synth = &zldev->synth[index];
+ const struct zl3073x_synth *synth;
- return mul_u64_u32_div(synth->freq_base * synth->freq_m,
- synth->freq_mult, synth->freq_n);
+ synth = zl3073x_synth_state_get(zldev, index);
+ return zl3073x_synth_freq_get(synth);
}
/**
- * zl3073x_synth_is_enabled - check if the given synth is enabled
+ * zl3073x_dev_synth_is_enabled - check if the given synth is enabled
* @zldev: pointer to zl3073x device
* @index: synth index
*
* Return: true if synth is enabled, false otherwise
*/
static inline bool
-zl3073x_synth_is_enabled(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_synth_is_enabled(struct zl3073x_dev *zldev, u8 index)
{
- return FIELD_GET(ZL_SYNTH_CTRL_EN, zldev->synth[index].ctrl);
+ const struct zl3073x_synth *synth;
+
+ synth = zl3073x_synth_state_get(zldev, index);
+ return zl3073x_synth_is_enabled(synth);
}
/**
- * zl3073x_out_synth_get - get synth connected to given output
+ * zl3073x_dev_out_synth_get - get synth connected to given output
* @zldev: pointer to zl3073x device
* @index: output index
*
* Return: index of synth connected to given output.
*/
static inline u8
-zl3073x_out_synth_get(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_out_synth_get(struct zl3073x_dev *zldev, u8 index)
{
- return FIELD_GET(ZL_OUTPUT_CTRL_SYNTH_SEL, zldev->out[index].ctrl);
+ const struct zl3073x_out *out = zl3073x_out_state_get(zldev, index);
+
+ return zl3073x_out_synth_get(out);
}
/**
- * zl3073x_out_is_enabled - check if the given output is enabled
+ * zl3073x_dev_out_is_enabled - check if the given output is enabled
* @zldev: pointer to zl3073x device
* @index: output index
*
* Return: true if the output is enabled, false otherwise
*/
static inline bool
-zl3073x_out_is_enabled(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_out_is_enabled(struct zl3073x_dev *zldev, u8 index)
{
- u8 synth;
+ const struct zl3073x_out *out = zl3073x_out_state_get(zldev, index);
+ const struct zl3073x_synth *synth;
+ u8 synth_id;
/* Output is enabled only if associated synth is enabled */
- synth = zl3073x_out_synth_get(zldev, index);
- if (!zl3073x_synth_is_enabled(zldev, synth))
- return false;
+ synth_id = zl3073x_out_synth_get(out);
+ synth = zl3073x_synth_state_get(zldev, synth_id);
- return FIELD_GET(ZL_OUTPUT_CTRL_EN, zldev->out[index].ctrl);
+ return zl3073x_synth_is_enabled(synth) && zl3073x_out_is_enabled(out);
}
/**
- * zl3073x_out_signal_format_get - get output signal format
+ * zl3073x_dev_out_signal_format_get - get output signal format
* @zldev: pointer to zl3073x device
* @index: output index
*
* Return: signal format of given output
*/
static inline u8
-zl3073x_out_signal_format_get(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_out_signal_format_get(struct zl3073x_dev *zldev, u8 index)
{
- return FIELD_GET(ZL_OUTPUT_MODE_SIGNAL_FORMAT, zldev->out[index].mode);
+ const struct zl3073x_out *out = zl3073x_out_state_get(zldev, index);
+
+ return zl3073x_out_signal_format_get(out);
}
/**
- * zl3073x_out_dpll_get - get DPLL ID the output is driven by
+ * zl3073x_dev_out_dpll_get - get DPLL ID the output is driven by
* @zldev: pointer to zl3073x device
* @index: output index
*
* Return: ID of DPLL the given output is driven by
*/
static inline
-u8 zl3073x_out_dpll_get(struct zl3073x_dev *zldev, u8 index)
+u8 zl3073x_dev_out_dpll_get(struct zl3073x_dev *zldev, u8 index)
{
- u8 synth;
+ const struct zl3073x_out *out = zl3073x_out_state_get(zldev, index);
+ const struct zl3073x_synth *synth;
+ u8 synth_id;
/* Get synthesizer connected to given output */
- synth = zl3073x_out_synth_get(zldev, index);
+ synth_id = zl3073x_out_synth_get(out);
+ synth = zl3073x_synth_state_get(zldev, synth_id);
/* Return DPLL that drives the synth */
- return zl3073x_synth_dpll_get(zldev, synth);
+ return zl3073x_synth_dpll_get(synth);
}
/**
- * zl3073x_out_is_diff - check if the given output is differential
+ * zl3073x_dev_out_is_diff - check if the given output is differential
* @zldev: pointer to zl3073x device
* @index: output index
*
* Return: true if output is differential, false if output is single-ended
*/
static inline bool
-zl3073x_out_is_diff(struct zl3073x_dev *zldev, u8 index)
+zl3073x_dev_out_is_diff(struct zl3073x_dev *zldev, u8 index)
{
- switch (zl3073x_out_signal_format_get(zldev, index)) {
- case ZL_OUTPUT_MODE_SIGNAL_FORMAT_LVDS:
- case ZL_OUTPUT_MODE_SIGNAL_FORMAT_DIFF:
- case ZL_OUTPUT_MODE_SIGNAL_FORMAT_LOWVCM:
- return true;
- default:
- break;
- }
+ const struct zl3073x_out *out = zl3073x_out_state_get(zldev, index);
- return false;
+ return zl3073x_out_is_diff(out);
}
/**
- * zl3073x_output_pin_is_enabled - check if the given output pin is enabled
+ * zl3073x_dev_output_pin_is_enabled - check if the given output pin is enabled
* @zldev: pointer to zl3073x device
* @id: output pin id
*
@@ -401,16 +374,21 @@ zl3073x_out_is_diff(struct zl3073x_dev *zldev, u8 index)
* Return: true if output pin is enabled, false if output pin is disabled
*/
static inline bool
-zl3073x_output_pin_is_enabled(struct zl3073x_dev *zldev, u8 id)
+zl3073x_dev_output_pin_is_enabled(struct zl3073x_dev *zldev, u8 id)
{
- u8 output = zl3073x_output_pin_out_get(id);
+ u8 out_id = zl3073x_output_pin_out_get(id);
+ const struct zl3073x_out *out;
+
+ out = zl3073x_out_state_get(zldev, out_id);
- /* Check if the whole output is enabled */
- if (!zl3073x_out_is_enabled(zldev, output))
+ /* Check if the output is enabled - call _dev_ helper that
+ * additionally checks for attached synth enablement.
+ */
+ if (!zl3073x_dev_out_is_enabled(zldev, out_id))
return false;
/* Check signal format */
- switch (zl3073x_out_signal_format_get(zldev, output)) {
+ switch (zl3073x_out_signal_format_get(out)) {
case ZL_OUTPUT_MODE_SIGNAL_FORMAT_DISABLED:
/* Both output pins are disabled by signal format */
return false;
diff --git a/drivers/dpll/zl3073x/dpll.c b/drivers/dpll/zl3073x/dpll.c
index d90150671d374..62996f26e065f 100644
--- a/drivers/dpll/zl3073x/dpll.c
+++ b/drivers/dpll/zl3073x/dpll.c
@@ -967,7 +967,7 @@ zl3073x_dpll_output_pin_esync_get(const struct dpll_pin *dpll_pin,
* for N-division is also used for the esync divider so both cannot
* be used.
*/
- switch (zl3073x_out_signal_format_get(zldev, out)) {
+ switch (zl3073x_dev_out_signal_format_get(zldev, out)) {
case ZL_OUTPUT_MODE_SIGNAL_FORMAT_2_NDIV:
case ZL_OUTPUT_MODE_SIGNAL_FORMAT_2_NDIV_INV:
return -EOPNOTSUPP;
@@ -1001,10 +1001,10 @@ zl3073x_dpll_output_pin_esync_get(const struct dpll_pin *dpll_pin,
}
/* Get synth attached to output pin */
- synth = zl3073x_out_synth_get(zldev, out);
+ synth = zl3073x_dev_out_synth_get(zldev, out);
/* Get synth frequency */
- synth_freq = zl3073x_synth_freq_get(zldev, synth);
+ synth_freq = zl3073x_dev_synth_freq_get(zldev, synth);
clock_type = FIELD_GET(ZL_OUTPUT_MODE_CLOCK_TYPE, output_mode);
if (clock_type != ZL_OUTPUT_MODE_CLOCK_TYPE_ESYNC) {
@@ -1078,7 +1078,7 @@ zl3073x_dpll_output_pin_esync_set(const struct dpll_pin *dpll_pin,
* for N-division is also used for the esync divider so both cannot
* be used.
*/
- switch (zl3073x_out_signal_format_get(zldev, out)) {
+ switch (zl3073x_dev_out_signal_format_get(zldev, out)) {
case ZL_OUTPUT_MODE_SIGNAL_FORMAT_2_NDIV:
case ZL_OUTPUT_MODE_SIGNAL_FORMAT_2_NDIV_INV:
return -EOPNOTSUPP;
@@ -1117,10 +1117,10 @@ zl3073x_dpll_output_pin_esync_set(const struct dpll_pin *dpll_pin,
goto write_mailbox;
/* Get synth attached to output pin */
- synth = zl3073x_out_synth_get(zldev, out);
+ synth = zl3073x_dev_out_synth_get(zldev, out);
/* Get synth frequency */
- synth_freq = zl3073x_synth_freq_get(zldev, synth);
+ synth_freq = zl3073x_dev_synth_freq_get(zldev, synth);
rc = zl3073x_read_u32(zldev, ZL_REG_OUTPUT_DIV, &output_div);
if (rc)
@@ -1172,8 +1172,8 @@ zl3073x_dpll_output_pin_frequency_get(const struct dpll_pin *dpll_pin,
int rc;
out = zl3073x_output_pin_out_get(pin->id);
- synth = zl3073x_out_synth_get(zldev, out);
- synth_freq = zl3073x_synth_freq_get(zldev, synth);
+ synth = zl3073x_dev_out_synth_get(zldev, out);
+ synth_freq = zl3073x_dev_synth_freq_get(zldev, synth);
guard(mutex)(&zldev->multiop_lock);
@@ -1195,7 +1195,7 @@ zl3073x_dpll_output_pin_frequency_get(const struct dpll_pin *dpll_pin,
}
/* Read used signal format for the given output */
- signal_format = zl3073x_out_signal_format_get(zldev, out);
+ signal_format = zl3073x_dev_out_signal_format_get(zldev, out);
switch (signal_format) {
case ZL_OUTPUT_MODE_SIGNAL_FORMAT_2_NDIV:
@@ -1263,12 +1263,12 @@ zl3073x_dpll_output_pin_frequency_set(const struct dpll_pin *dpll_pin,
int rc;
out = zl3073x_output_pin_out_get(pin->id);
- synth = zl3073x_out_synth_get(zldev, out);
- synth_freq = zl3073x_synth_freq_get(zldev, synth);
+ synth = zl3073x_dev_out_synth_get(zldev, out);
+ synth_freq = zl3073x_dev_synth_freq_get(zldev, synth);
new_div = synth_freq / (u32)frequency;
/* Get used signal format for the given output */
- signal_format = zl3073x_out_signal_format_get(zldev, out);
+ signal_format = zl3073x_dev_out_signal_format_get(zldev, out);
guard(mutex)(&zldev->multiop_lock);
@@ -1856,8 +1856,8 @@ zl3073x_dpll_pin_is_registrable(struct zl3073x_dpll *zldpll,
if (zldpll->refsel_mode == ZL_DPLL_MODE_REFSEL_MODE_NCO)
return false;
- is_diff = zl3073x_ref_is_diff(zldev, ref);
- is_enabled = zl3073x_ref_is_enabled(zldev, ref);
+ is_diff = zl3073x_dev_ref_is_diff(zldev, ref);
+ is_enabled = zl3073x_dev_ref_is_enabled(zldev, ref);
} else {
/* Output P&N pair shares single HW output */
u8 out = zl3073x_output_pin_out_get(index);
@@ -1865,7 +1865,7 @@ zl3073x_dpll_pin_is_registrable(struct zl3073x_dpll *zldpll,
name = "OUT";
/* Skip the pin if it is connected to different DPLL channel */
- if (zl3073x_out_dpll_get(zldev, out) != zldpll->id) {
+ if (zl3073x_dev_out_dpll_get(zldev, out) != zldpll->id) {
dev_dbg(zldev->dev,
"%s%u is driven by different DPLL\n", name,
out);
@@ -1873,8 +1873,8 @@ zl3073x_dpll_pin_is_registrable(struct zl3073x_dpll *zldpll,
return false;
}
- is_diff = zl3073x_out_is_diff(zldev, out);
- is_enabled = zl3073x_output_pin_is_enabled(zldev, index);
+ is_diff = zl3073x_dev_out_is_diff(zldev, out);
+ is_enabled = zl3073x_dev_output_pin_is_enabled(zldev, index);
}
/* Skip N-pin if the corresponding input/output is differential */
@@ -2124,7 +2124,7 @@ zl3073x_dpll_pin_ffo_check(struct zl3073x_dpll_pin *pin)
return false;
/* Get the latest measured ref's ffo */
- ffo = zl3073x_ref_ffo_get(zldev, ref);
+ ffo = zl3073x_dev_ref_ffo_get(zldev, ref);
/* Compare with previous value */
if (pin->freq_offset != ffo) {
diff --git a/drivers/dpll/zl3073x/out.c b/drivers/dpll/zl3073x/out.c
new file mode 100644
index 0000000000000..a48f6917b39fb
--- /dev/null
+++ b/drivers/dpll/zl3073x/out.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
+#include <linux/dev_printk.h>
+#include <linux/string.h>
+#include <linux/string_choices.h>
+#include <linux/types.h>
+
+#include "core.h"
+#include "out.h"
+
+/**
+ * zl3073x_out_state_fetch - fetch output state from hardware
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: output index to fetch state for
+ *
+ * Function fetches state of the given output from hardware and stores it
+ * for later use.
+ *
+ * Return: 0 on success, <0 on error
+ */
+int zl3073x_out_state_fetch(struct zl3073x_dev *zldev, u8 index)
+{
+ struct zl3073x_out *out = &zldev->out[index];
+ int rc;
+
+ /* Read output configuration */
+ rc = zl3073x_read_u8(zldev, ZL_REG_OUTPUT_CTRL(index), &out->ctrl);
+ if (rc)
+ return rc;
+
+ dev_dbg(zldev->dev, "OUT%u is %s and connected to SYNTH%u\n", index,
+ str_enabled_disabled(zl3073x_out_is_enabled(out)),
+ zl3073x_out_synth_get(out));
+
+ guard(mutex)(&zldev->multiop_lock);
+
+ /* Read output configuration */
+ rc = zl3073x_mb_op(zldev, ZL_REG_OUTPUT_MB_SEM, ZL_OUTPUT_MB_SEM_RD,
+ ZL_REG_OUTPUT_MB_MASK, BIT(index));
+ if (rc)
+ return rc;
+
+ /* Read output mode */
+ rc = zl3073x_read_u8(zldev, ZL_REG_OUTPUT_MODE, &out->mode);
+ if (rc)
+ return rc;
+
+ dev_dbg(zldev->dev, "OUT%u has signal format 0x%02x\n", index,
+ zl3073x_out_signal_format_get(out));
+
+ return rc;
+}
+
+/**
+ * zl3073x_out_state_get - get current output state
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: output index to get state for
+ *
+ * Return: pointer to given output state
+ */
+const struct zl3073x_out *zl3073x_out_state_get(struct zl3073x_dev *zldev,
+ u8 index)
+{
+ return &zldev->out[index];
+}
diff --git a/drivers/dpll/zl3073x/out.h b/drivers/dpll/zl3073x/out.h
new file mode 100644
index 0000000000000..986aa046221da
--- /dev/null
+++ b/drivers/dpll/zl3073x/out.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ZL3073X_OUT_H
+#define _ZL3073X_OUT_H
+
+#include <linux/bitfield.h>
+#include <linux/types.h>
+
+#include "regs.h"
+
+struct zl3073x_dev;
+
+/**
+ * struct zl3073x_out - output state
+ * @ctrl: output control
+ * @mode: output mode
+ */
+struct zl3073x_out {
+ u8 ctrl;
+ u8 mode;
+};
+
+int zl3073x_out_state_fetch(struct zl3073x_dev *zldev, u8 index);
+const struct zl3073x_out *zl3073x_out_state_get(struct zl3073x_dev *zldev,
+ u8 index);
+
+/**
+ * zl3073x_out_signal_format_get - get output signal format
+ * @out: pointer to out state
+ *
+ * Return: signal format of given output
+ */
+static inline u8 zl3073x_out_signal_format_get(const struct zl3073x_out *out)
+{
+ return FIELD_GET(ZL_OUTPUT_MODE_SIGNAL_FORMAT, out->mode);
+}
+
+/**
+ * zl3073x_out_is_diff - check if the given output is differential
+ * @out: pointer to out state
+ *
+ * Return: true if output is differential, false if output is single-ended
+ */
+static inline bool zl3073x_out_is_diff(const struct zl3073x_out *out)
+{
+ switch (zl3073x_out_signal_format_get(out)) {
+ case ZL_OUTPUT_MODE_SIGNAL_FORMAT_LVDS:
+ case ZL_OUTPUT_MODE_SIGNAL_FORMAT_DIFF:
+ case ZL_OUTPUT_MODE_SIGNAL_FORMAT_LOWVCM:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+/**
+ * zl3073x_out_is_enabled - check if the given output is enabled
+ * @out: pointer to out state
+ *
+ * Return: true if output is enabled, false if output is disabled
+ */
+static inline bool zl3073x_out_is_enabled(const struct zl3073x_out *out)
+{
+ return !!FIELD_GET(ZL_OUTPUT_CTRL_EN, out->ctrl);
+}
+
+/**
+ * zl3073x_out_synth_get - get synth connected to given output
+ * @out: pointer to out state
+ *
+ * Return: index of synth connected to given output.
+ */
+static inline u8 zl3073x_out_synth_get(const struct zl3073x_out *out)
+{
+ return FIELD_GET(ZL_OUTPUT_CTRL_SYNTH_SEL, out->ctrl);
+}
+
+#endif /* _ZL3073X_OUT_H */
diff --git a/drivers/dpll/zl3073x/prop.c b/drivers/dpll/zl3073x/prop.c
index 9e1fca5cdaf1e..4ed153087570b 100644
--- a/drivers/dpll/zl3073x/prop.c
+++ b/drivers/dpll/zl3073x/prop.c
@@ -46,10 +46,10 @@ zl3073x_pin_check_freq(struct zl3073x_dev *zldev, enum dpll_pin_direction dir,
/* Get output pin synthesizer */
out = zl3073x_output_pin_out_get(id);
- synth = zl3073x_out_synth_get(zldev, out);
+ synth = zl3073x_dev_out_synth_get(zldev, out);
/* Get synth frequency */
- synth_freq = zl3073x_synth_freq_get(zldev, synth);
+ synth_freq = zl3073x_dev_synth_freq_get(zldev, synth);
/* Check the frequency divides synth frequency */
if (synth_freq % (u32)freq)
@@ -93,13 +93,13 @@ zl3073x_prop_pin_package_label_set(struct zl3073x_dev *zldev,
prefix = "REF";
ref = zl3073x_input_pin_ref_get(id);
- is_diff = zl3073x_ref_is_diff(zldev, ref);
+ is_diff = zl3073x_dev_ref_is_diff(zldev, ref);
} else {
u8 out;
prefix = "OUT";
out = zl3073x_output_pin_out_get(id);
- is_diff = zl3073x_out_is_diff(zldev, out);
+ is_diff = zl3073x_dev_out_is_diff(zldev, out);
}
if (!is_diff)
@@ -217,8 +217,8 @@ struct zl3073x_pin_props *zl3073x_pin_props_get(struct zl3073x_dev *zldev,
* the synth frequency count.
*/
out = zl3073x_output_pin_out_get(index);
- synth = zl3073x_out_synth_get(zldev, out);
- f = 2 * zl3073x_synth_freq_get(zldev, synth);
+ synth = zl3073x_dev_out_synth_get(zldev, out);
+ f = 2 * zl3073x_dev_synth_freq_get(zldev, synth);
props->dpll_props.phase_gran = f ? div_u64(PSEC_PER_SEC, f) : 1;
}
diff --git a/drivers/dpll/zl3073x/ref.c b/drivers/dpll/zl3073x/ref.c
new file mode 100644
index 0000000000000..75652d9892af2
--- /dev/null
+++ b/drivers/dpll/zl3073x/ref.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
+#include <linux/dev_printk.h>
+#include <linux/string.h>
+#include <linux/string_choices.h>
+#include <linux/types.h>
+
+#include "core.h"
+#include "ref.h"
+
+/**
+ * zl3073x_ref_freq_factorize - factorize given frequency
+ * @freq: input frequency
+ * @base: base frequency
+ * @mult: multiplier
+ *
+ * Checks if the given frequency can be factorized using one of the
+ * supported base frequencies. If so the base frequency and multiplier
+ * are stored into appropriate parameters if they are not NULL.
+ *
+ * Return: 0 on success, -EINVAL if the frequency cannot be factorized
+ */
+int
+zl3073x_ref_freq_factorize(u32 freq, u16 *base, u16 *mult)
+{
+ static const u16 base_freqs[] = {
+ 1, 2, 4, 5, 8, 10, 16, 20, 25, 32, 40, 50, 64, 80, 100, 125,
+ 128, 160, 200, 250, 256, 320, 400, 500, 625, 640, 800, 1000,
+ 1250, 1280, 1600, 2000, 2500, 3125, 3200, 4000, 5000, 6250,
+ 6400, 8000, 10000, 12500, 15625, 16000, 20000, 25000, 31250,
+ 32000, 40000, 50000, 62500,
+ };
+ u32 div;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(base_freqs); i++) {
+ div = freq / base_freqs[i];
+
+ if (div <= U16_MAX && (freq % base_freqs[i]) == 0) {
+ if (base)
+ *base = base_freqs[i];
+ if (mult)
+ *mult = div;
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * zl3073x_ref_state_fetch - fetch input reference state from hardware
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: input reference index to fetch state for
+ *
+ * Function fetches state for the given input reference from hardware and
+ * stores it for later use.
+ *
+ * Return: 0 on success, <0 on error
+ */
+int zl3073x_ref_state_fetch(struct zl3073x_dev *zldev, u8 index)
+{
+ struct zl3073x_ref *ref = &zldev->ref[index];
+ int rc;
+
+ /* If the input is differential then the configuration for N-pin
+ * reference is ignored and P-pin config is used for both.
+ */
+ if (zl3073x_is_n_pin(index) && zl3073x_ref_is_diff(ref - 1)) {
+ memcpy(ref, ref - 1, sizeof(*ref));
+
+ return 0;
+ }
+
+ guard(mutex)(&zldev->multiop_lock);
+
+ /* Read reference configuration */
+ rc = zl3073x_mb_op(zldev, ZL_REG_REF_MB_SEM, ZL_REF_MB_SEM_RD,
+ ZL_REG_REF_MB_MASK, BIT(index));
+ if (rc)
+ return rc;
+
+ /* Read ref_config register */
+ rc = zl3073x_read_u8(zldev, ZL_REG_REF_CONFIG, &ref->config);
+ if (rc)
+ return rc;
+
+ dev_dbg(zldev->dev, "REF%u is %s and configured as %s\n", index,
+ str_enabled_disabled(zl3073x_ref_is_enabled(ref)),
+ zl3073x_ref_is_diff(ref) ? "differential" : "single-ended");
+
+ return rc;
+}
+
+/**
+ * zl3073x_ref_state_get - get current input reference state
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: input reference index to get state for
+ *
+ * Return: pointer to given input reference state
+ */
+const struct zl3073x_ref *
+zl3073x_ref_state_get(struct zl3073x_dev *zldev, u8 index)
+{
+ return &zldev->ref[index];
+}
diff --git a/drivers/dpll/zl3073x/ref.h b/drivers/dpll/zl3073x/ref.h
new file mode 100644
index 0000000000000..e72f2c8750876
--- /dev/null
+++ b/drivers/dpll/zl3073x/ref.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ZL3073X_REF_H
+#define _ZL3073X_REF_H
+
+#include <linux/bitfield.h>
+#include <linux/types.h>
+
+#include "regs.h"
+
+struct zl3073x_dev;
+
+/**
+ * struct zl3073x_ref - input reference state
+ * @ffo: current fractional frequency offset
+ * @config: reference config
+ */
+struct zl3073x_ref {
+ s64 ffo;
+ u8 config;
+};
+
+int zl3073x_ref_state_fetch(struct zl3073x_dev *zldev, u8 index);
+
+const struct zl3073x_ref *zl3073x_ref_state_get(struct zl3073x_dev *zldev,
+ u8 index);
+
+int zl3073x_ref_freq_factorize(u32 freq, u16 *base, u16 *mult);
+
+/**
+ * zl3073x_ref_ffo_get - get current fractional frequency offset
+ * @ref: pointer to ref state
+ *
+ * Return: the latest measured fractional frequency offset
+ */
+static inline s64
+zl3073x_ref_ffo_get(const struct zl3073x_ref *ref)
+{
+ return ref->ffo;
+}
+
+/**
+ * zl3073x_ref_is_diff - check if the given input reference is differential
+ * @ref: pointer to ref state
+ *
+ * Return: true if reference is differential, false if reference is single-ended
+ */
+static inline bool
+zl3073x_ref_is_diff(const struct zl3073x_ref *ref)
+{
+ return !!FIELD_GET(ZL_REF_CONFIG_DIFF_EN, ref->config);
+}
+
+/**
+ * zl3073x_ref_is_enabled - check if the given input reference is enabled
+ * @ref: pointer to ref state
+ *
+ * Return: true if input refernce is enabled, false otherwise
+ */
+static inline bool
+zl3073x_ref_is_enabled(const struct zl3073x_ref *ref)
+{
+ return !!FIELD_GET(ZL_REF_CONFIG_ENABLE, ref->config);
+}
+
+#endif /* _ZL3073X_REF_H */
diff --git a/drivers/dpll/zl3073x/synth.c b/drivers/dpll/zl3073x/synth.c
new file mode 100644
index 0000000000000..da839572dab26
--- /dev/null
+++ b/drivers/dpll/zl3073x/synth.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
+#include <linux/dev_printk.h>
+#include <linux/string.h>
+#include <linux/string_choices.h>
+#include <linux/types.h>
+
+#include "core.h"
+#include "synth.h"
+
+/**
+ * zl3073x_synth_state_fetch - fetch synth state from hardware
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: synth index to fetch state for
+ *
+ * Function fetches state of the given synthesizer from the hardware and
+ * stores it for later use.
+ *
+ * Return: 0 on success, <0 on error
+ */
+int zl3073x_synth_state_fetch(struct zl3073x_dev *zldev, u8 index)
+{
+ struct zl3073x_synth *synth = &zldev->synth[index];
+ int rc;
+
+ /* Read synth control register */
+ rc = zl3073x_read_u8(zldev, ZL_REG_SYNTH_CTRL(index), &synth->ctrl);
+ if (rc)
+ return rc;
+
+ guard(mutex)(&zldev->multiop_lock);
+
+ /* Read synth configuration */
+ rc = zl3073x_mb_op(zldev, ZL_REG_SYNTH_MB_SEM, ZL_SYNTH_MB_SEM_RD,
+ ZL_REG_SYNTH_MB_MASK, BIT(index));
+ if (rc)
+ return rc;
+
+ /* The output frequency is determined by the following formula:
+ * base * multiplier * numerator / denominator
+ *
+ * Read registers with these values
+ */
+ rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_BASE, &synth->freq_base);
+ if (rc)
+ return rc;
+
+ rc = zl3073x_read_u32(zldev, ZL_REG_SYNTH_FREQ_MULT, &synth->freq_mult);
+ if (rc)
+ return rc;
+
+ rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_M, &synth->freq_m);
+ if (rc)
+ return rc;
+
+ rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_N, &synth->freq_n);
+ if (rc)
+ return rc;
+
+ /* Check denominator for zero to avoid div by 0 */
+ if (!synth->freq_n) {
+ dev_err(zldev->dev,
+ "Zero divisor for SYNTH%u retrieved from device\n",
+ index);
+ return -EINVAL;
+ }
+
+ dev_dbg(zldev->dev, "SYNTH%u frequency: %u Hz\n", index,
+ zl3073x_synth_freq_get(synth));
+
+ return rc;
+}
+
+/**
+ * zl3073x_synth_state_get - get current synth state
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: synth index to get state for
+ *
+ * Return: pointer to given synth state
+ */
+const struct zl3073x_synth *zl3073x_synth_state_get(struct zl3073x_dev *zldev,
+ u8 index)
+{
+ return &zldev->synth[index];
+}
diff --git a/drivers/dpll/zl3073x/synth.h b/drivers/dpll/zl3073x/synth.h
new file mode 100644
index 0000000000000..844d5cce8a8cc
--- /dev/null
+++ b/drivers/dpll/zl3073x/synth.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ZL3073X_SYNTH_H
+#define _ZL3073X_SYNTH_H
+
+#include <linux/bitfield.h>
+#include <linux/math64.h>
+#include <linux/types.h>
+
+#include "regs.h"
+
+struct zl3073x_dev;
+
+/**
+ * struct zl3073x_synth - synthesizer state
+ * @freq_mult: frequency multiplier
+ * @freq_base: frequency base
+ * @freq_m: frequency numerator
+ * @freq_n: frequency denominator
+ * @ctrl: synth control
+ */
+struct zl3073x_synth {
+ u32 freq_mult;
+ u16 freq_base;
+ u16 freq_m;
+ u16 freq_n;
+ u8 ctrl;
+};
+
+int zl3073x_synth_state_fetch(struct zl3073x_dev *zldev, u8 synth_id);
+
+const struct zl3073x_synth *zl3073x_synth_state_get(struct zl3073x_dev *zldev,
+ u8 synth_id);
+
+int zl3073x_synth_state_set(struct zl3073x_dev *zldev, u8 synth_id,
+ const struct zl3073x_synth *synth);
+
+/**
+ * zl3073x_synth_dpll_get - get DPLL ID the synth is driven by
+ * @synth: pointer to synth state
+ *
+ * Return: ID of DPLL the given synthetizer is driven by
+ */
+static inline u8 zl3073x_synth_dpll_get(const struct zl3073x_synth *synth)
+{
+ return FIELD_GET(ZL_SYNTH_CTRL_DPLL_SEL, synth->ctrl);
+}
+
+/**
+ * zl3073x_synth_freq_get - get synth current freq
+ * @synth: pointer to synth state
+ *
+ * Return: frequency of given synthetizer
+ */
+static inline u32 zl3073x_synth_freq_get(const struct zl3073x_synth *synth)
+{
+ return mul_u64_u32_div(synth->freq_base * synth->freq_m,
+ synth->freq_mult, synth->freq_n);
+
+}
+
+/**
+ * zl3073x_synth_is_enabled - check if the given synth is enabled
+ * @synth: pointer to synth state
+ *
+ * Return: true if synth is enabled, false otherwise
+ */
+static inline bool zl3073x_synth_is_enabled(const struct zl3073x_synth *synth)
+{
+ return FIELD_GET(ZL_SYNTH_CTRL_EN, synth->ctrl);
+}
+
+#endif /* _ZL3073X_SYNTH_H */
--
2.51.0
Powered by blists - more mailing lists