| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org>
Date: Mon, 10 Nov 2025 19:23:41 +0100
From: "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
To: Mat Martineau <martineau@...nel.org>, Geliang Tang <geliang@...nel.org>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Simon Horman <horms@...nel.org>, Shuah Khan <shuah@...nel.org>
Cc: netdev@...r.kernel.org, mptcp@...ts.linux.dev,
linux-kselftest@...r.kernel.org, linux-kernel@...r.kernel.org,
"Matthieu Baerts (NGI0)" <matttbe@...nel.org>, stable@...r.kernel.org
Subject: [PATCH net 2/6] selftests: mptcp: join: rm: set backup flag
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@...r.kernel.org
Reviewed-by: Geliang Tang <geliang@...nel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@...nel.org>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 54 ++++++++++++-------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 78a1aa4ecff2..9ed9ec7202d6 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -2532,7 +2532,7 @@ remove_tests()
if reset "remove single subflow"; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
addr_nr_ns2=-1 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1
@@ -2545,8 +2545,8 @@ remove_tests()
if reset "remove multiple subflows"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
- pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
addr_nr_ns2=-2 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
@@ -2557,7 +2557,7 @@ remove_tests()
# single address, remove
if reset "remove single address"; then
pm_nl_set_limits $ns1 0 1
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 1
addr_nr_ns1=-1 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
@@ -2570,9 +2570,9 @@ remove_tests()
# subflow and signal, remove
if reset "remove subflow and signal"; then
pm_nl_set_limits $ns1 0 2
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 2
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
@@ -2584,10 +2584,10 @@ remove_tests()
# subflows and signal, remove
if reset "remove subflows and signal"; then
pm_nl_set_limits $ns1 0 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 3
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
@@ -2599,9 +2599,9 @@ remove_tests()
# addresses remove
if reset "remove addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup
pm_nl_set_limits $ns2 3 3
addr_nr_ns1=-3 speed=10 \
run_tests $ns1 $ns2 10.0.1.1
@@ -2614,10 +2614,10 @@ remove_tests()
# invalid addresses remove
if reset "remove invalid addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup
# broadcast IP: no packet for this address will be received on ns1
- pm_nl_add_endpoint $ns1 224.0.0.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
+ pm_nl_add_endpoint $ns1 224.0.0.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
pm_nl_set_limits $ns2 2 2
addr_nr_ns1=-3 speed=10 \
run_tests $ns1 $ns2 10.0.1.1
@@ -2631,10 +2631,10 @@ remove_tests()
# subflows and signal, flush
if reset "flush subflows and signal"; then
pm_nl_set_limits $ns1 0 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
pm_nl_set_limits $ns2 1 3
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
@@ -2647,9 +2647,9 @@ remove_tests()
if reset "flush subflows"; then
pm_nl_set_limits $ns1 3 3
pm_nl_set_limits $ns2 3 3
- pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
- pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
+ pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup id 150
+ pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
+ pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow,backup
addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
@@ -2666,9 +2666,9 @@ remove_tests()
# addresses flush
if reset "flush addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup id 250
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.4.1 flags signal,backup
pm_nl_set_limits $ns2 3 3
addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
@@ -2681,9 +2681,9 @@ remove_tests()
# invalid addresses flush
if reset "flush invalid addresses"; then
pm_nl_set_limits $ns1 3 3
- pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
- pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
+ pm_nl_add_endpoint $ns1 10.0.12.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.3.1 flags signal,backup
+ pm_nl_add_endpoint $ns1 10.0.14.1 flags signal,backup
pm_nl_set_limits $ns2 3 3
addr_nr_ns1=-8 speed=slow \
run_tests $ns1 $ns2 10.0.1.1
--
2.51.0
Powered by blists - more mailing lists