| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251110061409.726028-2-o.rempel@pengutronix.de>
Date: Mon, 10 Nov 2025 07:14:08 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Jonathan Cameron <jic23@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
kernel@...gutronix.de,
linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org,
devicetree@...r.kernel.org,
Andy Shevchenko <andy.shevchenko@...il.com>,
David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>
Subject: [PATCH v2 1/2] bindings: iio: adc: Add bindings for TI ADS131M0x ADCs
Add device tree bindings documentation for the Texas Instruments
ADS131M0x analog-to-digital converters. This family includes the ADS131M02,
ADS131M03, ADS131M04, ADS131M06, and ADS131M08 variants.
These variants differ primarily in the number of supported channels
(2, 3, 4, 6, and 8, respectively), which requires separate compatible
strings to validate the channel nodes.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
changes v2:
- Rename file to ti,ads131m02.yaml and update $id.
- Add supplies (avdd, dvdd, refin), interrupts, reset-gpios, and clock-names.
- Make avdd-supply, dvdd-supply, and clock-names required.
- Tighten channel validation logic for each device variant.
- Simplify channel description and reorder datasheet list.
- Update commit message to clarify device difference
---
.../bindings/iio/adc/ti,ads131m02.yaml | 220 ++++++++++++++++++
1 file changed, 220 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads131m02.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131m02.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131m02.yaml
new file mode 100644
index 000000000000..ed1d3fd4d26c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131m02.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads131m02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS131M0x 2-, 3-, 4-, 6- and 8-Channel ADCs
+
+maintainers:
+ - Oleksij Rempel <o.rempel@...gutronix.de>
+
+description: |
+ The ADS131M0x are a family of multichannel, simultaneous sampling,
+ 24-bit, delta-sigma, analog-to-digital converters (ADCs) with a
+ built-in programmable gain amplifier (PGA) and internal reference.
+ Communication with the ADC chip is via SPI.
+
+ Datasheets:
+ - ADS131M02: https://www.ti.com/lit/ds/symlink/ads131m02.pdf
+ - ADS131M03: https://www.ti.com/lit/ds/symlink/ads131m03.pdf
+ - ADS131M04: https://www.ti.com/lit/ds/symlink/ads131m04.pdf
+ - ADS131M06: https://www.ti.com/lit/ds/symlink/ads131m06.pdf
+ - ADS131M08: https://www.ti.com/lit/ds/symlink/ads131m08.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,ads131m02
+ - ti,ads131m03
+ - ti,ads131m04
+ - ti,ads131m06
+ - ti,ads131m08
+
+ reg:
+ description: SPI chip select number.
+
+ clocks:
+ description:
+ Phandle to the external clock source required by the ADC's CLKIN pin.
+ The datasheet recommends specific frequencies based on the desired power
+ mode (e.g., 8.192 MHz for High-Resolution mode).
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply (AVDD).
+
+ dvdd-supply:
+ description: Digital power supply (DVDD).
+
+ interrupts:
+ description: DRDY (Data Ready) output signal.
+ maxItems: 1
+
+ reset-gpios:
+ description: Optional RESET signal.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - avdd-supply
+ - dvdd-supply
+
+patternProperties:
+ "^channel@([0-7])$":
+ type: object
+ $ref: /schemas/iio/adc/adc.yaml#
+ description: Properties for a single ADC channel.
+
+ properties:
+ reg:
+ description: The channel index (0-7).
+ minimum: 0
+ maximum: 7 # Max channels on ADS131M08
+
+ label: true
+
+ required:
+ - reg
+
+ unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ - if:
+ # 20-pin devices: M02, M03, M04
+ # These do not support XTAL or REFIN.
+ properties:
+ compatible:
+ enum:
+ - ti,ads131m02
+ - ti,ads131m03
+ - ti,ads131m04
+ then:
+ properties:
+ clock-names:
+ const: clkin
+ refin-supply: false
+ required:
+ - clock-names
+
+ - if:
+ # 32-pin devices: M06, M08
+ # These support both XTAL/CLKIN and optional REFIN.
+ properties:
+ compatible:
+ enum:
+ - ti,ads131m06
+ - ti,ads131m08
+ then:
+ properties:
+ clock-names:
+ description:
+ Indicates if a crystal oscillator (XTAL) or CMOS signal is connected
+ (CLKIN).
+ enum: [xtal, clkin]
+ refin-supply:
+ description: Optional external reference supply (REFIN).
+ required:
+ - clock-names
+
+ - if:
+ # ADS131M02: 2 channels max (0-1)
+ properties:
+ compatible:
+ contains:
+ const: ti,ads131m02
+ then:
+ patternProperties:
+ "^channel@[0-1]$":
+ properties:
+ reg:
+ maximum: 1
+ "^channel@([2-7])$": false
+
+ - if:
+ # ADS131M03: 3 channels max (0-2)
+ properties:
+ compatible:
+ contains:
+ const: ti,ads131m03
+ then:
+ patternProperties:
+ "^channel@[0-2]$":
+ properties:
+ reg:
+ maximum: 2
+ "^channel@([3-7])$": false
+
+ - if:
+ # ADS131M04: 4 channels max (0-3)
+ properties:
+ compatible:
+ contains:
+ const: ti,ads131m04
+ then:
+ patternProperties:
+ "^channel@[0-3]$":
+ properties:
+ reg:
+ maximum: 3
+ "^channel@([4-7])$": false
+
+ - if:
+ # ADS131M06: 6 channels max (0-5)
+ properties:
+ compatible:
+ contains:
+ const: ti,ads131m06
+ then:
+ patternProperties:
+ "^channel@[0-5]$":
+ properties:
+ reg:
+ maximum: 5
+ "^channel@([6-7])$": false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+
+ spi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "ti,ads131m02";
+ reg = <0>;
+ spi-max-frequency = <8000000>;
+
+ clocks = <&rcc CK_MCO2>;
+ clock-names = "clkin";
+
+ avdd-supply = <&vdd_ana>;
+ dvdd-supply = <&vdd_dig>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ label = "input_voltage";
+ };
+
+ channel@1 {
+ reg = <1>;
+ label = "input_current";
+ };
+ };
+ };
--
2.47.3
Powered by blists - more mailing lists