linux-kernel - [PATCH v1 3/4] serial: qcom-geni: Enable PM runtime for serial driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251110101043.2108414-4-praveen.talari@oss.qualcomm.com>
Date: Mon, 10 Nov 2025 15:40:42 +0530
From: Praveen Talari <praveen.talari@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>, Dmitry Baryshkov <lumag@...nel.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-serial@...r.kernel.org, alexey.klimov@...aro.org,
        krzk@...nel.org, bryan.odonoghue@...aro.org,
        jorge.ramirez@....qualcomm.com, dmitry.baryshkov@....qualcomm.com
Cc: Konrad Dybcio <konrad.dybcio@....qualcomm.com>, psodagud@...cinc.com,
        djaggi@...cinc.com, quic_msavaliy@...cinc.com,
        quic_vtanuku@...cinc.com, quic_arandive@...cinc.com,
        quic_shazhuss@...cinc.com, quic_cchiluve@...cinc.com,
        Praveen Talari <praveen.talari@....qualcomm.com>
Subject: [PATCH v1 3/4] serial: qcom-geni: Enable PM runtime for serial driver

The GENI serial driver currently handles power resource management
through calls to the statically defined geni_serial_resources_on() and
geni_serial_resources_off() functions. This approach reduces modularity
and limits support for platforms with diverse power management
mechanisms, including resource managed by firmware.

Improve modularity and enable better integration with platform-specific
power management, introduce support for runtime PM. Use
pm_runtime_resume_and_get() and pm_runtime_put_sync() within the
qcom_geni_serial_pm() callback to control resource power state
transitions based on UART power state changes.

Signed-off-by: Praveen Talari <praveen.talari@....qualcomm.com>
---
 drivers/tty/serial/qcom_geni_serial.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 8058b839b26c..9c820302047c 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1650,10 +1650,10 @@ static void qcom_geni_serial_pm(struct uart_port *uport,
 		old_state = UART_PM_STATE_OFF;
 
 	if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF)
-		geni_serial_resources_on(uport);
+		pm_runtime_resume_and_get(uport->dev);
 	else if (new_state == UART_PM_STATE_OFF &&
 		 old_state == UART_PM_STATE_ON)
-		geni_serial_resources_off(uport);
+		pm_runtime_put_sync(uport->dev);
 
 }
 
@@ -1815,6 +1815,8 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	devm_pm_runtime_enable(port->se.dev);
+
 	ret = uart_add_one_port(drv, uport);
 	if (ret)
 		return ret;
@@ -1846,6 +1848,22 @@ static void qcom_geni_serial_remove(struct platform_device *pdev)
 	uart_remove_one_port(drv, &port->uport);
 }
 
+static int __maybe_unused qcom_geni_serial_runtime_suspend(struct device *dev)
+{
+	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
+	struct uart_port *uport = &port->uport;
+
+	return geni_serial_resources_off(uport);
+}
+
+static int __maybe_unused qcom_geni_serial_runtime_resume(struct device *dev)
+{
+	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
+	struct uart_port *uport = &port->uport;
+
+	return geni_serial_resources_on(uport);
+}
+
 static int qcom_geni_serial_suspend(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
@@ -1889,6 +1907,8 @@ static const struct qcom_geni_device_data qcom_geni_uart_data = {
 };
 
 static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
+	SET_RUNTIME_PM_OPS(qcom_geni_serial_runtime_suspend,
+			   qcom_geni_serial_runtime_resume, NULL)
 	SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_suspend, qcom_geni_serial_resume)
 };
 
-- 
2.34.1