lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251112115459.2479225-2-r-donadkar@ti.com>
Date: Wed, 12 Nov 2025 17:24:42 +0530
From: Rishikesh Donadkar <r-donadkar@...com>
To: <jai.luthra@...ux.dev>, <laurent.pinchart@...asonboard.com>,
	<mripard@...nel.org>
CC: <r-donadkar@...com>, <y-abhilashchandra@...com>, <devarsht@...com>,
	<s-jain1@...com>, <vigneshr@...com>, <mchehab@...nel.org>, <robh@...nel.org>,
	<krzk+dt@...nel.org>, <p.zabel@...gutronix.de>, <conor+dt@...nel.org>,
	<sakari.ailus@...ux.intel.com>, <hverkuil-cisco@...all.nl>,
	<tomi.valkeinen@...asonboard.com>, <jai.luthra@...asonboard.com>,
	<changhuang.liang@...rfivetech.com>, <jack.zhu@...rfivetech.com>,
	<sjoerd@...labora.com>, <dan.carpenter@...aro.org>,
	<hverkuil+cisco@...nel.org>, <linux-kernel@...r.kernel.org>,
	<linux-media@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: [PATCH v8 01/18] media: ti: j721e-csi2rx: Remove word size alignment on frame width

j721e-csi2rx driver has a limitation of frame width being a multiple
word size. However, there is no such limitation imposed by the
hardware [1].

Remove this limitation from the driver.

Link: https://www.ti.com/lit/pdf/spruj16
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@...com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@...com>
---
 .../platform/ti/j721e-csi2rx/j721e-csi2rx.c   | 24 ++++---------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index b75aa363d1bf2..710d05a053539 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -43,7 +43,6 @@
 #define SHIM_PSI_CFG0_DST_TAG		GENMASK(31, 16)
 
 #define TI_CSI2RX_MAX_PIX_PER_CLK	4
-#define PSIL_WORD_SIZE_BYTES		16
 /*
  * There are no hard limits on the width or height. The DMA engine can handle
  * all sizes. The max width and height are arbitrary numbers for this driver.
@@ -250,19 +249,12 @@ static void ti_csi2rx_fill_fmt(const struct ti_csi2rx_fmt *csi_fmt,
 			       struct v4l2_format *v4l2_fmt)
 {
 	struct v4l2_pix_format *pix = &v4l2_fmt->fmt.pix;
-	unsigned int pixels_in_word;
-
-	pixels_in_word = PSIL_WORD_SIZE_BYTES * 8 / csi_fmt->bpp;
 
 	/* Clamp width and height to sensible maximums (16K x 16K) */
 	pix->width = clamp_t(unsigned int, pix->width,
-			     pixels_in_word,
-			     MAX_WIDTH_BYTES * 8 / csi_fmt->bpp);
+			     1, MAX_WIDTH_BYTES * 8 / csi_fmt->bpp);
 	pix->height = clamp_t(unsigned int, pix->height, 1, MAX_HEIGHT_LINES);
 
-	/* Width should be a multiple of transfer word-size */
-	pix->width = rounddown(pix->width, pixels_in_word);
-
 	v4l2_fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	pix->pixelformat = csi_fmt->fourcc;
 	pix->bytesperline = pix->width * (csi_fmt->bpp / 8);
@@ -360,23 +352,15 @@ static int ti_csi2rx_enum_framesizes(struct file *file, void *fh,
 				     struct v4l2_frmsizeenum *fsize)
 {
 	const struct ti_csi2rx_fmt *fmt;
-	unsigned int pixels_in_word;
 
 	fmt = find_format_by_fourcc(fsize->pixel_format);
 	if (!fmt || fsize->index != 0)
 		return -EINVAL;
 
-	/*
-	 * Number of pixels in one PSI-L word. The transfer happens in multiples
-	 * of PSI-L word sizes.
-	 */
-	pixels_in_word = PSIL_WORD_SIZE_BYTES * 8 / fmt->bpp;
-
 	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
-	fsize->stepwise.min_width = pixels_in_word;
-	fsize->stepwise.max_width = rounddown(MAX_WIDTH_BYTES * 8 / fmt->bpp,
-					      pixels_in_word);
-	fsize->stepwise.step_width = pixels_in_word;
+	fsize->stepwise.min_width = 1;
+	fsize->stepwise.max_width = MAX_WIDTH_BYTES * 8 / fmt->bpp;
+	fsize->stepwise.step_width = 1;
 	fsize->stepwise.min_height = 1;
 	fsize->stepwise.max_height = MAX_HEIGHT_LINES;
 	fsize->stepwise.step_height = 1;
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ