| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251114-automatic-clocks-v5-4-efb9202ffcd7@linaro.org>
Date: Fri, 14 Nov 2025 14:16:51 +0000
From: Peter Griffin <peter.griffin@...aro.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Alim Akhtar <alim.akhtar@...sung.com>,
André Draszik <andre.draszik@...aro.org>,
Tudor Ambarus <tudor.ambarus@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Sam Protsenko <semen.protsenko@...aro.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>
Cc: Will McVicker <willmcvicker@...gle.com>,
Krzysztof Kozlowski <krzk@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-samsung-soc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
kernel-team@...roid.com, Peter Griffin <peter.griffin@...aro.org>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH v5 4/4] clk: samsung: gs101: Enable auto_clock_gate mode
for each gs101 CMU
Enable auto clock mode, and define the additional fields which are used
when this mode is enabled.
/sys/kernel/debug/clk/clk_summary now reports approximately 308 running
clocks and 298 disabled clocks. Prior to this commit 586 clocks were
running and 17 disabled.
Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
---
Changes in v4:
- Remove unnecessary header of_address.h (Peter)
---
drivers/clk/samsung/clk-gs101.c | 55 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c
index 70b26db9b95ad0b376d23f637c7683fbc8c8c600..8551289b46eb88ec61dd1914d0fe782ae6794000 100644
--- a/drivers/clk/samsung/clk-gs101.c
+++ b/drivers/clk/samsung/clk-gs101.c
@@ -26,6 +26,10 @@
#define CLKS_NR_PERIC0 (CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK + 1)
#define CLKS_NR_PERIC1 (CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK + 1)
+#define GS101_GATE_DBG_OFFSET 0x4000
+#define GS101_DRCG_EN_OFFSET 0x104
+#define GS101_MEMCLK_OFFSET 0x108
+
/* ---- CMU_TOP ------------------------------------------------------------- */
/* Register Offset definitions for CMU_TOP (0x1e080000) */
@@ -1433,6 +1437,9 @@ static const struct samsung_cmu_info top_cmu_info __initconst = {
.nr_clk_ids = CLKS_NR_TOP,
.clk_regs = cmu_top_clk_regs,
.nr_clk_regs = ARRAY_SIZE(cmu_top_clk_regs),
+ .auto_clock_gate = true,
+ .gate_dbg_offset = GS101_GATE_DBG_OFFSET,
+ .option_offset = CMU_CMU_TOP_CONTROLLER_OPTION,
};
static void __init gs101_cmu_top_init(struct device_node *np)
@@ -1900,6 +1907,11 @@ static const struct samsung_gate_clock apm_gate_clks[] __initconst = {
CLK_CON_GAT_GOUT_BLK_APM_UID_XIU_DP_APM_IPCLKPORT_ACLK, 21, CLK_IS_CRITICAL, 0),
};
+static const unsigned long dcrg_memclk_sysreg[] __initconst = {
+ GS101_DRCG_EN_OFFSET,
+ GS101_MEMCLK_OFFSET,
+};
+
static const struct samsung_cmu_info apm_cmu_info __initconst = {
.mux_clks = apm_mux_clks,
.nr_mux_clks = ARRAY_SIZE(apm_mux_clks),
@@ -1912,6 +1924,12 @@ static const struct samsung_cmu_info apm_cmu_info __initconst = {
.nr_clk_ids = CLKS_NR_APM,
.clk_regs = apm_clk_regs,
.nr_clk_regs = ARRAY_SIZE(apm_clk_regs),
+ .sysreg_clk_regs = dcrg_memclk_sysreg,
+ .nr_sysreg_clk_regs = ARRAY_SIZE(dcrg_memclk_sysreg),
+ .auto_clock_gate = true,
+ .gate_dbg_offset = GS101_GATE_DBG_OFFSET,
+ .drcg_offset = GS101_DRCG_EN_OFFSET,
+ .memclk_offset = GS101_MEMCLK_OFFSET,
};
/* ---- CMU_HSI0 ------------------------------------------------------------ */
@@ -2375,7 +2393,14 @@ static const struct samsung_cmu_info hsi0_cmu_info __initconst = {
.nr_clk_ids = CLKS_NR_HSI0,
.clk_regs = hsi0_clk_regs,
.nr_clk_regs = ARRAY_SIZE(hsi0_clk_regs),
+ .sysreg_clk_regs = dcrg_memclk_sysreg,
+ .nr_sysreg_clk_regs = ARRAY_SIZE(dcrg_memclk_sysreg),
.clk_name = "bus",
+ .auto_clock_gate = true,
+ .gate_dbg_offset = GS101_GATE_DBG_OFFSET,
+ .option_offset = HSI0_CMU_HSI0_CONTROLLER_OPTION,
+ .drcg_offset = GS101_DRCG_EN_OFFSET,
+ .memclk_offset = GS101_MEMCLK_OFFSET,
};
/* ---- CMU_HSI2 ------------------------------------------------------------ */
@@ -2863,7 +2888,14 @@ static const struct samsung_cmu_info hsi2_cmu_info __initconst = {
.nr_clk_ids = CLKS_NR_HSI2,
.clk_regs = cmu_hsi2_clk_regs,
.nr_clk_regs = ARRAY_SIZE(cmu_hsi2_clk_regs),
+ .sysreg_clk_regs = dcrg_memclk_sysreg,
+ .nr_sysreg_clk_regs = ARRAY_SIZE(dcrg_memclk_sysreg),
.clk_name = "bus",
+ .auto_clock_gate = true,
+ .gate_dbg_offset = GS101_GATE_DBG_OFFSET,
+ .option_offset = HSI2_CMU_HSI2_CONTROLLER_OPTION,
+ .drcg_offset = GS101_DRCG_EN_OFFSET,
+ .memclk_offset = GS101_MEMCLK_OFFSET,
};
/* ---- CMU_MISC ------------------------------------------------------------ */
@@ -3423,7 +3455,14 @@ static const struct samsung_cmu_info misc_cmu_info __initconst = {
.nr_clk_ids = CLKS_NR_MISC,
.clk_regs = misc_clk_regs,
.nr_clk_regs = ARRAY_SIZE(misc_clk_regs),
+ .sysreg_clk_regs = dcrg_memclk_sysreg,
+ .nr_sysreg_clk_regs = ARRAY_SIZE(dcrg_memclk_sysreg),
.clk_name = "bus",
+ .auto_clock_gate = true,
+ .gate_dbg_offset = GS101_GATE_DBG_OFFSET,
+ .option_offset = MISC_CMU_MISC_CONTROLLER_OPTION,
+ .drcg_offset = GS101_DRCG_EN_OFFSET,
+ .memclk_offset = GS101_MEMCLK_OFFSET,
};
static void __init gs101_cmu_misc_init(struct device_node *np)
@@ -4010,6 +4049,10 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = {
21, 0, 0),
};
+static const unsigned long dcrg_sysreg[] __initconst = {
+ GS101_DRCG_EN_OFFSET,
+};
+
static const struct samsung_cmu_info peric0_cmu_info __initconst = {
.mux_clks = peric0_mux_clks,
.nr_mux_clks = ARRAY_SIZE(peric0_mux_clks),
@@ -4020,7 +4063,13 @@ static const struct samsung_cmu_info peric0_cmu_info __initconst = {
.nr_clk_ids = CLKS_NR_PERIC0,
.clk_regs = peric0_clk_regs,
.nr_clk_regs = ARRAY_SIZE(peric0_clk_regs),
+ .sysreg_clk_regs = dcrg_sysreg,
+ .nr_sysreg_clk_regs = ARRAY_SIZE(dcrg_sysreg),
.clk_name = "bus",
+ .auto_clock_gate = true,
+ .gate_dbg_offset = GS101_GATE_DBG_OFFSET,
+ .option_offset = PERIC0_CMU_PERIC0_CONTROLLER_OPTION,
+ .drcg_offset = GS101_DRCG_EN_OFFSET,
};
/* ---- CMU_PERIC1 ---------------------------------------------------------- */
@@ -4368,7 +4417,13 @@ static const struct samsung_cmu_info peric1_cmu_info __initconst = {
.nr_clk_ids = CLKS_NR_PERIC1,
.clk_regs = peric1_clk_regs,
.nr_clk_regs = ARRAY_SIZE(peric1_clk_regs),
+ .sysreg_clk_regs = dcrg_sysreg,
+ .nr_sysreg_clk_regs = ARRAY_SIZE(dcrg_sysreg),
.clk_name = "bus",
+ .auto_clock_gate = true,
+ .gate_dbg_offset = GS101_GATE_DBG_OFFSET,
+ .option_offset = PERIC1_CMU_PERIC1_CONTROLLER_OPTION,
+ .drcg_offset = GS101_DRCG_EN_OFFSET,
};
/* ---- platform_driver ----------------------------------------------------- */
--
2.52.0.rc1.455.g30608eb744-goog
Powered by blists - more mailing lists