linux-kernel - [PATCH v2 4/5] ARM: dts: lpc3250-phy3250: rename nodename at@0 to eeprom@0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20251114174712.1206027-4-Frank.Li@nxp.com>
Date: Fri, 14 Nov 2025 12:47:11 -0500
From: Frank Li <Frank.Li@....com>
To: Vladimir Zapolskiy <vz@...ia.com>,
	Piotr Wojtaszczyk <piotr.wojtaszczyk@...esys.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-arm-kernel@...ts.infradead.org (moderated list:ARM/LPC32XX SOC SUPPORT),
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH v2 4/5] ARM: dts: lpc3250-phy3250: rename nodename at@0 to eeprom@0

Rename nodename at@0 to eeprom@0 to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dtb: at25@0 (atmel,at25): $nodename: 'anyOf' conditional failed, one must be fixed:
	'at25@0' does not match '^eeprom@[0-9a-f]{1,2}$'
	'at25@0' does not match '^fram@[0-9a-f]{1,2}$'

Signed-off-by: Frank Li <Frank.Li@....com>
---
change in v2
- new patch
---
 arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
index 732d590f6cfdf..15463a96938cc 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
@@ -200,7 +200,7 @@ &ssp0 {
 	cs-gpios = <&gpio 3 5 0>;
 	status = "okay";
 
-	eeprom: at25@0 {
+	eeprom: eeprom@0 {
 		compatible = "atmel,at25";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-- 
2.34.1