| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251114064541.446276-4-quic_vikramsa@quicinc.com>
Date: Fri, 14 Nov 2025 12:15:41 +0530
From: Vikram Sharma <quic_vikramsa@...cinc.com>
To: <bryan.odonoghue@...aro.org>, <mchehab@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>, <andersson@...nel.org>,
<konradybcio@...nel.org>, <hverkuil-cisco@...all.nl>,
<cros-qcom-dts-watchers@...omium.org>, <catalin.marinas@....com>,
<will@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <quic_svankada@...cinc.com>,
<linux-media@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_nihalkum@...cinc.com>, <quic_vikramsa@...cinc.com>,
Ravi Shankar
<quic_rshankar@...cinc.com>,
Vishal Verma <quic_vishverm@...cinc.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
Subject: [PATCH v5 3/3] arm64: dts: qcom: monaco-evk-camera: Add DT overlay
From: Nihal Kumar Gupta <quic_nihalkum@...cinc.com>
Monaco EVK board does not include a camera sensor in its default hardware
configuration. Introducing a device tree overlay to support optional
integration of the IMX577 sensor via CSIPHY1.
Camera reset is handled through an I2C expander, and power is enabled
via TLMM GPIO74.
An example media-ctl pipeline for the imx577 is:
media-ctl --reset
media-ctl -V '"imx577 3-001a":0[fmt:SRGGB10/4056x3040 field:none]'
media-ctl -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
media-ctl -l '"msm_csiphy1":1->"msm_csid0":0[1]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video1
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@...cinc.com>
Co-developed-by: Ravi Shankar <quic_rshankar@...cinc.com>
Signed-off-by: Ravi Shankar <quic_rshankar@...cinc.com>
Co-developed-by: Vishal Verma <quic_vishverm@...cinc.com>
Signed-off-by: Vishal Verma <quic_vishverm@...cinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@...cinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../dts/qcom/monaco-evk-camera-imx577.dtso | 105 ++++++++++++++++++
2 files changed, 109 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6f34d5ed331c..b1ba182a0d8d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -38,6 +38,10 @@ lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera-csi1-imx577.dtb
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb
dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb
+
+monaco-evk-camera-imx577-dtbs := monaco-evk.dtb monaco-evk-camera-imx577.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-camera-imx577.dtb
+
dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso
new file mode 100644
index 000000000000..9bc8fdb9e743
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-evk-camera-imx577.dtso
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ vreg_cam1_2p8: vreg-cam1-2p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_cam1_2p8";
+ startup-delay-us = <10000>;
+ enable-active-high;
+ gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam1_avdd_2v8_en_default>;
+ };
+};
+
+&camss {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ csiphy1_ep: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&imx577_ep1>;
+ };
+ };
+ };
+};
+
+&cci1 {
+ pinctrl-0 = <&cci1_0_default>;
+ pinctrl-1 = <&cci1_0_sleep>;
+
+ status = "okay";
+};
+
+&cci1_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx577";
+ reg = <0x1a>;
+
+ reset-gpios = <&expander2 1 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&cam1_default>;
+ pinctrl-names = "default";
+
+ clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clock-rates = <24000000>;
+
+ avdd-supply = <&vreg_cam1_2p8>;
+
+ port {
+ imx577_ep1: endpoint {
+ link-frequencies = /bits/ 64 <600000000>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&csiphy1_ep>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ /*
+ * gpio67, gpio68, gpio69 provide MCLK0, MCLK1, MCLK2 for
+ * CAM0, CAM1 and CAM2 respectively via the "cam_mclk" function.
+ * So, here it's MCLK1 pin for instance.
+ */
+ cam1_default: cam1-default-state {
+ pins = "gpio68";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ /*
+ * gpio73, gpio74, gpio75 enable AVDD regulators for
+ * CAM0, CAM1 and CAM2 respectively via the "gpio" function.
+ * So, here it's AVDD1 pin for instance.
+ */
+ cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state {
+ pins = "gpio74";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--
2.34.1
Powered by blists - more mailing lists