[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251114084224.3268928-1-horatiu.vultur@microchip.com>
Date: Fri, 14 Nov 2025 09:42:24 +0100
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Horatiu Vultur
<horatiu.vultur@...rochip.com>
Subject: [PATCH net-next] net: phy: micrel: lan8814: Enable in-band auto-negotiation
The lan8814 supports two interfaces towards the host (QSGMII and QUSGMII).
Currently the lan8814 disables the auto-negotiation towards the host
side. So, extend this to allow to configure to use in-band
auto-negotiation.
I have tested this only with the QSGMII interface.
Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
---
drivers/net/phy/micrel.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 57ea947369fed..5d90ccc20df75 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -2988,6 +2988,8 @@ static int ksz886x_cable_test_get_status(struct phy_device *phydev,
#define LAN_EXT_PAGE_ACCESS_ADDRESS_DATA 0x17
#define LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC 0x4000
+#define LAN8814_QSGMII_TX_CONFIG 0x35
+#define LAN8814_QSGMII_TX_CONFIG_QSGMII BIT(3)
#define LAN8814_QSGMII_SOFT_RESET 0x43
#define LAN8814_QSGMII_SOFT_RESET_BIT BIT(0)
#define LAN8814_QSGMII_PCS1G_ANEG_CONFIG 0x13
@@ -4501,12 +4503,24 @@ static void lan8814_setup_led(struct phy_device *phydev, int val)
static int lan8814_config_init(struct phy_device *phydev)
{
struct kszphy_priv *lan8814 = phydev->priv;
+ int ret;
- /* Disable ANEG with QSGMII PCS Host side */
- lanphy_modify_page_reg(phydev, LAN8814_PAGE_PORT_REGS,
- LAN8814_QSGMII_PCS1G_ANEG_CONFIG,
- LAN8814_QSGMII_PCS1G_ANEG_CONFIG_ANEG_ENA,
- 0);
+ /* Based on the interface type select how the advertise ability is
+ * encoded, to set as SGMII or as USGMII.
+ */
+ if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
+ ret = lanphy_modify_page_reg(phydev, LAN8814_PAGE_COMMON_REGS,
+ LAN8814_QSGMII_TX_CONFIG,
+ LAN8814_QSGMII_TX_CONFIG_QSGMII,
+ LAN8814_QSGMII_TX_CONFIG_QSGMII);
+ else
+ ret = lanphy_modify_page_reg(phydev, LAN8814_PAGE_COMMON_REGS,
+ LAN8814_QSGMII_TX_CONFIG,
+ LAN8814_QSGMII_TX_CONFIG_QSGMII,
+ 0);
+
+ if (ret < 0)
+ return ret;
/* MDI-X setting for swap A,B transmit */
lanphy_modify_page_reg(phydev, LAN8814_PAGE_PCS_DIGITAL, LAN8814_ALIGN_SWAP,
@@ -6640,6 +6654,8 @@ static struct phy_driver ksphy_driver[] = {
.suspend = genphy_suspend,
.resume = kszphy_resume,
.config_intr = lan8814_config_intr,
+ .inband_caps = lan8842_inband_caps,
+ .config_inband = lan8842_config_inband,
.handle_interrupt = lan8814_handle_interrupt,
.cable_test_start = lan8814_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
--
2.34.1
Powered by blists - more mailing lists