[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v67V01k8zj2r+Dd+JDEsH2LX2Jtx+CP=i8aQfX_JyFtLfg@mail.gmail.com>
Date: Sun, 16 Nov 2025 22:03:18 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Kuba Szczodrzyński <kuba@...zodrzynski.pl>
Cc: Maxime Ripard <mripard@...nel.org>, Samuel Holland <samuel@...lland.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org, parthiban@...umiz.com, paulk@...-base.io
Subject: Re: [PATCH v3 0/6] drm/sun4i: Support LVDS on D1s/T113 combo D-PHY
On Sun, Nov 16, 2025 at 9:46 PM Kuba Szczodrzyński
<kuba@...zodrzynski.pl> wrote:
>
> [replying to v1 to keep the same series on Patchwork]
That is not the right way to do it.
If you reply to an old series, the tooling does not pickup the new version
as a separate series.
ChenYu
> Some Allwinner chips (notably the D1s/T113 and the A100) have a "combo
> MIPI DSI D-PHY" which is required when using single-link LVDS0. The same
> PD0..PD9 pins are used for either DSI or LVDS.
>
> Other than having to use the combo D-PHY, LVDS output is configured in
> the same way as on older chips.
>
> This series enables the sun6i MIPI D-PHY to also work in LVDS mode. It
> is then configured by the LCD TCON, which allows connecting a
> single-link LVDS display panel.
>
> Changes in v2/v3:
> - Applied code formatting changes from review comments
> - Changed "dphy" to "combo-phy"
> - Made the LVDS setup/teardown functions abort early in case of error
> (adding a proper return value would require changes in several levels
> of caller functions; perhaps could be done in a separate patch)
> - Added the PHY properties to DT bindings
> - Renamed lvds0_pins to lcd_lvds0_pins
> - Rebased on top of drm/misc/kernel/for-linux-next
> - Hopefully corrected the incomplete patch list of v2, which happened
> due to an SMTP error
>
> Kuba Szczodrzyński (6):
> phy: allwinner: phy-sun6i-mipi-dphy: Support LVDS in combo D-PHY
> drm/sun4i: Support LVDS using MIPI DSI combo D-PHY
> drm/sun4i: Enable LVDS output on sun20i D1s/T113
> dt-bindings: display: sun4i: Add D1s/T113 combo D-PHY bindings
> riscv: dts: allwinner: d1s-t113: Add D-PHY to TCON LCD0
> riscv: dts: allwinner: d1s-t113: Add LVDS0 pins
>
> .../display/allwinner,sun4i-a10-tcon.yaml | 6 ++
> .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 11 +++
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 50 +++++++++++++
> drivers/gpu/drm/sun4i/sun4i_tcon.h | 6 ++
> drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 70 ++++++++++++++++++-
> 5 files changed, 141 insertions(+), 2 deletions(-)
>
> --
> 2.25.1
>
Powered by blists - more mailing lists