linux-kernel - Re: [PATCH v2 0/3] Add CAMSS support for SM6350

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <17e7ebc9-3b88-4334-b87d-1bce6d5bb120@linaro.org>
Date: Sun, 16 Nov 2025 14:30:27 +0000
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: Luca Weiss <luca.weiss@...rphone.com>, Bryan O'Donoghue <bod@...nel.org>,
 Robert Foss <rfoss@...nel.org>, Todor Tomov <todor.too@...il.com>,
 Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
 Mauro Carvalho Chehab <mchehab@...nel.org>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
 Konrad Dybcio <konradybcio@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
 linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/3] Add CAMSS support for SM6350

On 14/11/2025 15:59, Luca Weiss wrote:
> On Fri Nov 14, 2025 at 4:51 PM CET, Bryan O'Donoghue wrote:
>> On 14/11/2025 11:15, Luca Weiss wrote:
>>> Add bindings, driver and dts to support the Camera Subsystem on the
>>> SM6350 SoC.
>>>
>>> These patches were tested on a Fairphone 4 smartphone with WIP sensor
>>> drivers (Sony IMX576 and IMX582), the camera pipeline works properly as
>>> far as I can tell.
>>>
>>> Though when stopping the camera stream, the following clock warning
>>> appears in dmesg. But it does not interfere with any functionality,
>>> starting and stopping the stream works and debugcc is showing 426.4 MHz
>>> while the clock is on, and 'off' while it's off.
>>>
>>> Any suggestion how to fix this, is appreciated.
>>>
>>> [ 5738.590980] ------------[ cut here ]------------
>>> [ 5738.591009] gcc_camera_axi_clk status stuck at 'on'
>>> [ 5738.591049] WARNING: CPU: 0 PID: 6918 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x170/0x190
>>
>> Do you have a full and complete kernel tree we could look at here ?
> 
> Sure, this branch has everything in:
> 
> https://github.com/sm6350-mainline/linux/tree/sm6350-6.17.y/
> 
> For further refence, at least two other people have tested this branch
> in postmarketOS, nothing particularly exciting to report from there,
> apart from that the sdm-skin-thermal thermal zone (thermistor right next
> to SoC) is currently configured with 55 degC as critical trip, which is
> quickly achieved when starting a video recording, but that's not really
> an issue with camss, but will need some tweaking regardless.
> 
> https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/7281

diff --git a/drivers/clk/qcom/gcc-sm6350.c b/drivers/clk/qcom/gcc-sm6350.c
index a4d6dff9d0f7f..229629ef82809 100644
--- a/drivers/clk/qcom/gcc-sm6350.c
+++ b/drivers/clk/qcom/gcc-sm6350.c
@@ -908,9 +908,7 @@ static struct clk_branch gcc_camera_ahb_clk = {

  static struct clk_branch gcc_camera_axi_clk = {
         .halt_reg = 0x17018,
-       .halt_check = BRANCH_HALT,
-       .hwcg_reg = 0x17018,
-       .hwcg_bit = 1,
+       .halt_check = BRANCH_VOTED,
         .clkr = {
                 .enable_reg = 0x17018,
                 .enable_mask = BIT(0),

?

---
bod