[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID:
<CAGwozwExxbcrTQP5G6cc3sjayiW+crCXTfG4VHi85QrMqFtpBQ@mail.gmail.com>
Date: Sun, 16 Nov 2025 17:19:12 +0100
From: Antheas Kapenekakis <lkml@...heas.dev>
To: Armin Wolf <W_Armin@....de>
Cc: platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-hwmon@...r.kernel.org, Hans de Goede <hansg@...nel.org>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Derek John Clark <derekjohn.clark@...il.com>,
Joaquín Ignacio Aramendía <samsagax@...il.com>,
Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>
Subject: Re: [PATCH v5 6/6] platform/x86: ayaneo-ec: Add suspend hook
On Sun, 16 Nov 2025 at 17:05, Armin Wolf <W_Armin@....de> wrote:
>
> Am 13.11.25 um 22:22 schrieb Antheas Kapenekakis:
>
> > The Ayaneo EC resets after hibernation, losing the charge control state.
> > Add a small PM hook to restore this state on hibernation resume.
> >
> > The fan speed is also lost during hibernation, but since hibernation
> > failures are common with this class of devices, setting a low fan speed
> > when the userspace program controlling the fan will potentially not
> > take over could cause the device to overheat, so it is not restored.
> >
> > Signed-off-by: Antheas Kapenekakis <lkml@...heas.dev>
> > ---
> > drivers/platform/x86/ayaneo-ec.c | 84 +++++++++++++++++++++++++++++++-
> > 1 file changed, 83 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/platform/x86/ayaneo-ec.c b/drivers/platform/x86/ayaneo-ec.c
> > index 814f7f028710..3f40429acbd4 100644
> > --- a/drivers/platform/x86/ayaneo-ec.c
> > +++ b/drivers/platform/x86/ayaneo-ec.c
> > @@ -52,6 +52,11 @@ struct ayaneo_ec_platform_data {
> > struct platform_device *pdev;
> > struct ayaneo_ec_quirk *quirks;
> > struct acpi_battery_hook battery_hook;
> > +
> > + // Protects access to restore_pwm
> > + struct mutex hwmon_lock;
> > + bool restore_charge_limit;
> > + bool restore_pwm;
> > };
> >
> > static const struct ayaneo_ec_quirk quirk_fan = {
> > @@ -208,10 +213,16 @@ static int ayaneo_ec_read(struct device *dev, enum hwmon_sensor_types type,
> > static int ayaneo_ec_write(struct device *dev, enum hwmon_sensor_types type,
> > u32 attr, int channel, long val)
> > {
> > + struct ayaneo_ec_platform_data *data = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + guard(mutex)(&data->hwmon_lock);
> > +
> > switch (type) {
> > case hwmon_pwm:
> > switch (attr) {
> > case hwmon_pwm_enable:
> > + data->restore_pwm = false;
> > switch (val) {
> > case 1:
> > return ec_write(AYANEO_PWM_ENABLE_REG,
> > @@ -225,6 +236,17 @@ static int ayaneo_ec_write(struct device *dev, enum hwmon_sensor_types type,
> > case hwmon_pwm_input:
> > if (val < 0 || val > 255)
> > return -EINVAL;
> > + if (data->restore_pwm) {
> > + /*
> > + * Defer restoring PWM control to after
> > + * userspace resumes successfully
> > + */
> > + ret = ec_write(AYANEO_PWM_ENABLE_REG,
> > + AYANEO_PWM_MODE_MANUAL);
> > + if (ret)
> > + return ret;
> > + data->restore_pwm = false;
> > + }
> > return ec_write(AYANEO_PWM_REG, (val * 100) / 255);
> > default:
> > break;
> > @@ -454,11 +476,14 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
> >
> > data->pdev = pdev;
> > data->quirks = dmi_entry->driver_data;
> > + ret = devm_mutex_init(&pdev->dev, &data->hwmon_lock);
> > + if (ret)
> > + return ret;
> > platform_set_drvdata(pdev, data);
> >
> > if (data->quirks->has_fan_control) {
> > hwdev = devm_hwmon_device_register_with_info(&pdev->dev,
> > - "ayaneo_ec", NULL, &ayaneo_ec_chip_info, NULL);
> > + "ayaneo_ec", data, &ayaneo_ec_chip_info, NULL);
> > if (IS_ERR(hwdev))
> > return PTR_ERR(hwdev);
> > }
> > @@ -475,10 +500,67 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int ayaneo_freeze(struct device *dev)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> > + int ret;
> > + u8 tmp;
> > +
> > + if (data->quirks->has_charge_control) {
> > + ret = ec_read(AYANEO_CHARGE_REG, &tmp);
> > + if (ret)
> > + return ret;
> > +
> > + data->restore_charge_limit = tmp == AYANEO_CHARGE_VAL_INHIBIT;
> > + }
> > +
> > + if (data->quirks->has_fan_control) {
> > + ret = ec_read(AYANEO_PWM_ENABLE_REG, &tmp);
> > + if (ret)
> > + return ret;
> > +
> > + data->restore_pwm = tmp == AYANEO_PWM_MODE_MANUAL;
> > +
> > + /*
> > + * Release the fan when entering hibernation to avoid
> > + * overheating if hibernation fails and hangs.
> > + */
> > + if (data->restore_pwm) {
> > + ret = ec_write(AYANEO_PWM_ENABLE_REG, AYANEO_PWM_MODE_AUTO);
> > + if (ret)
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int ayaneo_restore(struct device *dev)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> > + int ret;
> > +
> > + if (data->quirks->has_charge_control && data->restore_charge_limit) {
> > + ret = ec_write(AYANEO_CHARGE_REG, AYANEO_CHARGE_VAL_INHIBIT);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops ayaneo_pm_ops = {
> > + .freeze = ayaneo_freeze,
> > + .restore = ayaneo_restore,
> > +};
> > +
> > static struct platform_driver ayaneo_platform_driver = {
> > .driver = {
> > .name = "ayaneo-ec",
> > .dev_groups = ayaneo_ec_groups,
> > + .pm = &ayaneo_pm_ops,
>
> Maybe you should use pm_sleep_ptr() here. With that being fixed:
True, i conflated that with using a sleep define so I skipped it.
Seems it is a ternary that checks CONFIG_PM_SLEEP
@Ilpo lmk if I should resend this before the merge window or it's
small enough to edit inplace
Antheas
> Reviewed-by: Armin Wolf <W_Armin@....de>
>
> > },
> > .probe = ayaneo_ec_probe,
> > };
>
Powered by blists - more mailing lists